|
|
|
Eastman cloth drills and marking machines work through numerous layers of fabric for simplified indication of buttonholes, darts, pockets, etc. Available in both hot and cold configurations, a variety of dills and awls, and a choice of tips.
|
|
Global Selfeeders are drill units designed and built to maintain high accuracy and high durability in the most demanding applications.
These units were developed on the forefront of holemaking technology in order to meet current requirements of high speed, high accuracy and lower cost for world-wide markets.
|
|
These drilling units provide spindle rotation and thrust operated by utilizing compressed air.
Pneumatically driven, this unit can be used without the need of electrical wiring.
|
|
E2 Drilling Units range from extremely compact pneumatic units to power packs with electrically-operated spindles and integrated hydraulic system.
Depicted above is E2's BE48-series of Electro-Pneumatic Drilling Units. Please check out E2's website (www.e2systems.com) for comprehensive information on the whole E2 product range.
E2 units are easy to install as well as use, and have functions such as quick advance, controlled working feed, multi-wall drilling and chip removal. Most are available with multi-spindle heads.
E2 drilling units can be found throughout the world wherever a high level of productivity and precision is vital. A long service life with excellent reliability and continued precision makes E2's drilling units a good investment.
|
|
Precision ground, pre-loaded, ball screw actuated quill feed on center line of spindle
.0001” Per revolution minimum feed rate, 500 IPM maximum
1,000 Pound thrust capacity
3 HP Max. spindle motor size
150mm (5.9”) stroke
10,000 RPM Maximum speed
Full CNC rigid tapping, left or right hand, and drapping cycles (combination drilling and tapping)
Programmed peck and multiple stage cycles
Spindle nose options including ABS, HSK, ASA, and ER single angle collets
Barrel foot mount, sub-base plate, and vertical column options
|
|
This very compact BE22-series of E2 drilling units comes in a wide range of speeds, with multi-spindle heads and a several different chuck alternatives.
It's sturdy designe secures a long life of precision drilling.
|
|
All pneumatic drilling unit in a stainless version for tough environments like Water Jet machines (starting hole when cutting soft materials).
This very compact drilling unit is naturally also offered in ordinary steel.
|
|
- BEM3 machining units are equipped with a 3-phase electric motor and can be used in single-purpose applications.
- Integrated pneumatic feed and hydraulic brake-cylinder assembly for rapid advance and feed control
- Standard electric limit switches.
- Rigid cast-Iron housing.
- Precision angular contact spindle bearings.
- Slim design. High performance to size ratio.
- Variable spindle speed combinations with interchangeable push-on pulleys. See speed selection table.
- The machining unit BEM3 has been designed for continuous operation of max. 18000 RPM with frequency converter.
|
|
These units are available in three sizes, LBL25, LBL35 and LBL45, each size covering a specific diameter range, totally up to 20 mm in steel. The basic units can be fitted with different chucks, twin heads for simultaneous drilling of two or more holes and attachments for chip removal and tapping.
Highly dependable units featuring quick and precise clamping, making them highly dependable. Easy to build into systems and have several holes drilled in a single operation since several of these compact units can be built together.
|
|
The CP comprehensive range of autofeed drills and tappers are suitable for single spindle operations to multi spindle processes.
Pneumatic and electric drives from 0.22 to 0.75kW (0.3 - 1.0hp) with thrusts from 320 to 1557N (72 - 350lbf)
AFDE200 - Drill/ Tapper - Electric drive/ Pneumatic feed
AFDE410 - Drill/ Tapper - Electric drive/ Pneumatic feed
AFDE610 - Drill/ Tapper - Electric drive/ Pneumatic feed
AFTE480 - Tapper - Electric Drive/ Leadscrew feed
AFD205 - Drill/ Tapper - Pneumatic drive/ feed
AFD215 - Drill/ Tapper - Pneumatic drive/ feed
AFD415 - Drill/ Tapper - Pneumatic drive/ feed
AFD625 - Drill/ Tapper - Pneumatic drive/ feed
|
|
|
In order to accomplish the complete processing of workpieces on a centre lathe, there are machines, whose acquisition is extremely complex very expensively and programming. Our proposal for solution aims there that with a relatively simple accessory equipment, which can be to a large extent completely finished worked on turned parts. This accessory equipment, briefly “MILLINGFIXED” mentioned, can both on conventional and cycle-steered centre lathes, simply post and/or. are rigged. To temporary storage facilities of turned parts, renewed rigging to a second machine, double expenditure of time, as well as high acquisition value are allotted. Complex programming and an impaired work space are omitted likewise by the employment “MILLINGFIXED”. We are convinced of the fact that this innovative solution will be for manufacturing and repair shops relating to crafts, as well as very useful for school and training in particular.
|
|
|
|
|
|
E2 products are known world wide for their quality, durability, precision and power. Each series of E2 units are the most compact in the market today.
E2 has a wide range of boring units widely used in all kinds of applications.
E2 customers benefit from the high quality of the E2 product line with less down-time and reduced operating costs. The compact design of the E2 units together with a good service of CAD-drawings/-models makes the design of the surrounding machine more convenient.
E2´s concern for the worker and his environment is evident in all E2 products. Low noise levels and non-lubrication features eliminating oil mist in the air is a common denominator for the E2 product line.
E2´s self feeding units utilizes a build in hydraulic feed control system. They combine precision with power enabling high precision also in multi-spindle head applications. The extremely compact Air hydraulic drilling units cover your need when drilling smaller holes. E2´s electro-pneumatic and - hydraulic units are to be used when more power is needed. You will still have the E2 durability and precision. The E2 product line also includes non-feed pneumatic units.
|
|
| ... products without technical information |
| |
Guard for workbench drill or column drill
- PETG screen.
- Adjustable height guard.
- Electrical micro-contact safety system.
- Waterproof switch.
|
|
| ... products without technical information |
| |
R25 Bit diameter 33 mm, 1 1/3 inch
Robit Rocktools Ltd, established 1985, is a Scandinavian manufacturer of high quality rock and ground drilling tools for construction, mining and quarrying
|
|
3000 TC Earth Drill
Cranes up to 9T Ton Metre
Drilling Diameter
100 to 600mm
• Highest standard of quality and service.
• Competitive pricing
• Fast delivery times
|
|
Crane attachment rigs
Equipment for execution of bored piles up to diam. 2500 mm (3000 mm using underreamer ) and 102 m max excavation depth. Both rigs can be used together with casing oscillator.
R-25 can drive casing directly with the rotary.
This equipment can be mounted on any type of crane with min 40/50 ton capacity giving high performance and great reliability.
|
|
Stable and robust monobloc design virtually eliminates distortion (one-piece body and fixed jaw).
-The clamping mechanism type can be changed at any time as required.
Any type of vise may be combined with any type of clamping mechanism!.
-The movable jaw can easily be removed to clean the vise body (by pulling out the positioning pins).
-Optional angle driver available.
-Optional swivel base available.
-Many accessories available
The following clamping mechanism are available:
- Manual clamping mechanism with hydraulic power booster.
- Manual clamping mechanism with mechanical power booster.
- Hydro-pneumatic (air over oil) clamping mechanism (6-7 bar).
The spindles are available with adjustable power control. This allows you to preset the clamping pressure before operating the vice.
|
|
ecopos – Drilling machine vice
Protected against drag spin and lift
Secured at the pivot point of the guide rail, ecopos, together with the work piece can be swivelled and slid to any position
Without risk of accident
No injuries, no work accidents, no consequential costs – a firm grip on accident protection, in spite of maximum speed and freedom of movement.
On each machine table
ecopos – set up everywhere thanks to guide rail or patented positioning clamps.
Unique worldwide
Secured at the pivot point of the guide rail, ecopos, together with the work piece can be swivelled and slid to any position within a working area of 120 x 150mm. Secure and protected against drag spin and lift.
|
|
|
|
|
|
The AF_10 is a machining centre designed to cut to the utmost the time you have to dedicate to reinforcement fastening operations.
Because it features a loading roller conveyor and an unloading magazine, the bars are stored at exit. Once the profile has been inserted, movement, machining and unloading are all automatic. This way, the operator in charge of welding can take up the bars four at a time, thus cutting times down to the minimum. Or else the operator can dedicate him/herself with greater continuity to other operations required for the preparation of the welding bar.
The AF_10 offers various machining options: it permits having two screw pitch values and two distance values for the first screw from the outer point of the profile (tip of corner in case of 45° cuts, or outer point in case of 90° cuts for the crosspieces). What is more, it also carries out another operation of primary importance (selectable): because it has a lower motor, it drills frames for wall mounting preparation (or other jobs to be verified).
Finally, this is a machining centre which we recommend if you wish to increase the productivity of both a medium-sized workshop or an industrial workshop (in this latter case together with other machining centre and/or cutting/machining units)
|
|
The I.4F is an electro-pneumatic milling machinewith a vertical axis, fitted with a revolving head, equipped with four cutter-holding shafts.
This model allows you to fit four different cutting units with the relevant stops, and to use each time the required unit simply by turning the cutter-support head.
It is also supplied with orienting gripper to obtain cutting at 45° or intermediate angles.
The wide range of extra fittings allows very quick changes in working, saving time wastage caused by errors in setting up, by avoiding disassembly and assembly, with considerable increase in productivity.
|
|
|
As the market leader in precision measuring devices, Acu-Rite products have consistently set the standard of innovation for nearly 50 years. Proudly designed and manufactured in the USA, Acu-Rite products retain a tradition of superior quality and are preferred by machine tool builders worldwide.
|
|
ACU RITE RADIAL makes its radial drill still faster!
ACU RITE radial
Those, high performance position display for radial and high-speed radial drills, which can be served easily.
The collection of the machine motion is made by means of a ACU RITE length measuring system at the arm and - usually - by a friction wheel system at the column. With the help of a further measuring system at the guide also the drilling depth can be measured and indicated.
|
|
|
|