|
|
Roscamat 500; Capacity M2-M24 (M27)
As regards performance unit R-500 can be considered identical with unit R-400, with the advantageously bigger working range thanks to the longer arms.
The machine consists basically of the following elements: radial arm, lockable elbow joint, tilting arm and head. The compressed-air motor is coupled to the latter. Through the foot and by means of three M8 screws the machine can be fixed to a table or workbench. Such attachment can also be obtained by means of a simple clamp.
The radial arm and the tilting arm revolve about themselves. The latter tilts therewith always maintaining the perpendicularity to the foot reference plane.The machine incorporates an air servicing unit (filter + regulator lubricator) for the correct operation of the motor.
The modular system consisting in a series of 7 quick-change modules (reducers) is provided for coupling to said motor. As a result of this 7 output speeds (90, 170, 300, 550, 750, 1050, 2100 rpm) are available thus allowing to adapt the tap speed to every type of thread. The handle allows to balance the tilting arm and to position it at the operator's convenience.
The modular system admits the quick-change tap holders with or without safety clutch depending on the intended job (blind or through holes).
Threading capacity from M2 up to M24 (M27).
|
|
Roscamat 200; Capacity M2-M14 (M16)
This machine consists of a pendular parallelogram that is balanced by a pneumatic spring, plus a radial arm.
The gas spring and radial arm assembly fixes the motor head and keeps it perpendicular to the working area. The motor is equipped with a quick-change system and is rotated by compressed air that has previously been filtered and lubricated by a unit for that purpose.
Taps and shank tooling fit to the motor's quick-change system by means of tapholders.
|
|
For High-Production CNC Tapping Without Machine Reversal.
Constant Speed Tapping relies on the compact tapping head to provide tap
reversal. The machine spindle runs in one direction at the exact programmed speed and reversal occurs within the tapping head instantaneously upon machine retraction. Avoiding the RPM fluctuations,common to machine reversal tapping ensures these benefits:
Reduces Cycle Time.
Increases Tap Life.
Improves Thread Quality.
Eliminates Reversal Related Machine Wear & Tear.
Reduces Energy Costs. |
|
TA With Tension-Compression & Quick-Change Spindle
APPLICATION
For CNC Machining And Turning Centers
Or Conventional Lathes And Mills.
FEATURES & ADVANTAGES
Tension/Compression Compensation: Provides greater thread accuracy and higher production rates.
Hard Start: For accurate depth control.
Front Release: If tension is accidentally over extended, adapter is released. Prevents damage to tap or workpiece.
Short Length: For limited space.
Tap Holding: Accepts Quick Change Tap Adapters |
|
These units are available in three sizes, LBL25, LBL35 and LBL45, each size covering a specific diameter range, totally up to 20 mm in steel. The basic units can be fitted with different chucks, twin heads for simultaneous drilling of two holes and attachments for chip removal and tapping.
Highly dependable - LBL drilling and tapping units feature quick and precise clamping, making them highly dependable.
Easy to build together - Several holes can be drilled in a single operation since several of these compact units can easily be built together.
Low noise level - The units have a low noise level as the exhaust air is discharged through silencers inside the protective casing.
|
|
| ... products without technical information |
| |
Atlas Copco pistol-grip drills are suitable for most drilling tasks in virtually every sector of industry.
Comfortable grip for high precision.
Cost-saving.
Two-hand grip available.
Lubrication free.
The new LBB36 with its high power gives:
Faster operation
Better hole quality
Reduced risk of stalling
They are strong, reliable and thanks to the chuck guard easy to guide, producing perfect holes every time. |
|
An air drill's chuck does most of the work. That's why all Ingersoll Rand air drills are engineered with high quality chucks that resist wear and tear. Our new family of air drills have industrial grade chucks and keyless chuck versions that are extra tough for drilling, sawing, valve guide reaming, cylinder honing and wire brushing. They are more powerful, efficient and durable than previous models, with smooth, quiet operation.
1/4" Chuck - .4HP, 1800 RPM
3/8" Chuck - .5HP, 1200-2500 RPM
1/2" Chuck - .5HP, 400-500 RPM
|
|
Pressure die-casting is mostly used when it is necessary to include special geometries for joints, integrated spacers, handles and details for assembling, sophisticated containers, heat sinks with circular fins.
Die-cast products can be finished with:
- Polishing;
- Painting;
- Anodization;
- Chromate treatment (transparent and gold).
As for prototypes and/or little series it is possible to use pressure sand die-casting or with lost wax, prior of producing the final steel die. |
|
Description:
Provided with the base unit are two filler metering systems, one resin metering system, one catalyst metering system, one base-color metering system and a two color contrast injector system. Additional raw material
systems can be supplied as needed.
The base Autocaster Ultra™continuous casting machine also includes:
· Up to 60 lbs/minute matrix production.
· Recipe based matrix control (100 recipes in control panel) with on-the-fly recipe changes and adjustments for resin %,
catalyst %, base-color and matrix output.
· Totalizer for all raw materials (except contrast color).
· Operator calibrated gear pumps for resin, catalyst and base colors.
· Operator calibrated solid-core filler metering augers.
· Filler hoppers with integrated anti-bridging devices.
· Integrated resin heating system.
· Adjustable flow contrast color injectors (up to eight units).
· High efficiency hardened steel machined mixing auger and barrel.
· Modular base-color systems with expandable base-color pump and recirculation.
· Inverter controlled motors for all raw materials (except contrast color). |
|
| ... products without technical information |
| |
|
|
see the results for the following category
