|
|
• Blower and air knife systems custom designed to cool conveyorized products down to ambient temperatures
• Let us know the starting and ending temperatures and throughput rates
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC Motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order |
|
• Blower and air knife systems custom designed to cool conveyorized products down to ambient temperatures
• Let us know the starting and ending temperatures and throughput rates
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC Motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order |
|
| Air condensing chiller (option water condenser) designed for spot cooling or centralised cooling system . Range from 1 to 350 KW monobloc factory equiped with tank and pump. Numerous options allowed adaptable to each process . |
|
Complete of free-cooling ECF and ECFS series
Offering exceptional performance levels in terms of efficiency, the units in the new series are able to exploit low ambient air temperature conditions whenever available - all year round. The new range, which extends the existing line of air conditioning units, has been specifically engineered to provide the exceptional reliability demanded in industrial application. Although the maximum saving in energy is obtained during continuous operation of the systems for 24 hours/day, chillers equipped with free-cooling allow very substantial power consumption savings even with short periods of operation, while also guaranteeing longer life expectancy and reduced maintenance requirements when compared to conventional chillers. The operating methods utilized guarantee energy savings typically in excess of 40% with respect to conventional units. |
|
Powerciat LX
High-capacity air-cooled chiller for cooling of commercial, industrial or healthcare facilities. May be connected to emitters such as terminal units (e.g. fan coil units and water cassettes) or air handling units. Designed as standard for outdoor installation without any special weather protection.
R407C or R134a refrigerant,
- Fully encased in a housing constructed of coated metal panels that can be detached for outdoor installation,
- Two or three independent refrigerant circuits,
- Two or three twin-screw compressors with built-in oil separator and part-winding start,
- Multitube evaporator with two or three refrigerant circuits and equipped with a water flow rate controller,
- 4 to 12 propeller fans,
- User-friendly XTRACONNECT microprocessor-based controller with many self-regulating functions,
- Communication with BMS via an RS-485 interface (Modbus/Jbus) as standard, LON in option
- 3 acoustics versions standard, Low Noise, Xtra Low Noise
- Partial heat recovery available as an option..
15 models available in 3 versions
- LX: Cooling-only without hydraulic system,
- LXC: Cooling-only with hydraulic system, without tank,
- LXH: Cooling-only version with complete hydraulic system and tank. |
|
Dynaciat
Chiller connectable to groundwater or underground loops or a medium-capacity dry cooler or cooling tower to cool residential buildings and commercial, industrial and healthcare facilities. May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or air handling units. Designed as standard for installation in heated or insulated enclosed rooms.
15 models available
Cooling capacity: 35 to 350 kW
- LG: With air-cooled condenser,
- LGN: Without condenser, may be connected to a dry air cooler.
- R410A refrigerant,
- Compact, space-efficient unit,
- Fully encased in a housing constructed of detachable coated metal panels,
- One or two independent refrigerant circuits,
- One to four new-generation, high-efficiency scroll compressors,
- Water-cooled brazed plate heat exchangers,
- User-friendly CONNECT microprocessor-based controller with many self-regulating functions,
- Communication with BMS via an RS-485 interface (Modbus/Jbus) as standard. |
|
The compact, high efficiency, low noise and low vibration design if further enhanced with the on board Hitachi microcomputer, allowing extremely accurate set point control. As would be expected from one of the leading names in the industry, the Hitachi Samurai Range includes a multi-point fault and alarm system, through the 4, 7 segment LCD displays.
- R407c Refrigerant
- hitachi Screw Compressor
- Modulating Capacity Control 25-100%
- Plate Heat Exchanger
- Economiser Circuit |
|
Koolant Koolers C Series chillers are an all-in-one package, including the refrigeration circuit, tank and pump - all sized to suit your cooling needs. This unit is available in one to hundreds of tons of cooling, utilizing multi-module cooling of your water application. This design is also well-suited to be utilized with indirect cooing with heat exchanger packages for all fluid types, including acid and coating technologies. The C Series utilizes a submersed copper coil heat exchanger to offer extra freeze protection in situations where glycol cannot be used in your water.
|
|
Koolant Koolers C Series chillers are an all-in-one package, including the refrigeration circuit, tank and pump - all sized to suit your cooling needs. This unit is available in one to hundreds of tons of cooling, utilizing multi-module cooling of your water application. This design is also well-suited to be utilized with indirect cooing with heat exchanger packages for all fluid types, including acid and coating technologies. The C Series utilizes a submersed copper coil heat exchanger to offer extra freeze protection in situations where glycol cannot be used in your water.
Applications:
Diffusion pumps
Vapor recovery
Electronic equipment
Heat exchangers
Heat treat equipment
Hydraulic equipment
Processing equipment
Medical diagnostic equipment
Lasers
Jackets
Molds
Printing equipment
Rubber machinery
Spot welders
Spindles
Features:
Totally self-contained
Standard digital temperature controllers
Nema 12 electric panel
Fused disconnect switches
Large stainless steel reservoir- open
Re-circulating pump
Can be built to meet UL 1995, CSA, or CE standards
Hermetic or semi-hermetic compressors available on units through 20 tons
Semi-hermetic compressors are standard on models over 20 tons |
|
Aquaciat 2
Medium-capacity air-cooled chiller for heating and cooling of residential buildings, businesses, industrial facilities and healthcare facilities. May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or air handling units. Designed as standard for outdoor installation without any special weather protection.
- R-410A refrigerant,
- Compact, space-efficient unit,
- Fully encased in a housing constructed of coated metal panels that can be detached for outdoor installation,
- One or two independent refrigerant circuits,
- One to four new-generation, high-efficiency scroll compressors,
- Water-cooled brazed-plate heat exchanger,
- One to four propeller fans,
- User-friendly CONNECT microprocessor-based controller with many self-regulating functions,
- Communication with BMS via an RS-485 interface (Modbus/Jbus) as standard.
20 models available
Cooling capacity: 20 to 300 kW
- LD: Without hydraulic system,
- LDC: With hydraulic system, without tank,
- LDH: With complete hydraulic system and tank. |
|
Aquaciat Power
High-capacity air-cooled chiller for cooling of commercial, industrial or healthcare facilities. May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or air handling units. Designed as standard for outdoor installation without any special weather protection.
- R-410A refrigerant,
- Compact unit takes up little ground space,
- Fully encased in a housing constructed of coated metal panels that can be detached for outdoor installation,
- Two independent refrigerant circuits,
- Four to six new-generation, high-efficiency scroll compressors,
- Water-cooled brazed-plate heat exchanger,
- Six to eight propeller fans,
- User-friendly CONNECT microprocessor-based controller with many self-regulating functions,
- Total or partial energy recovery.
- Communication with BMS via an RS-485 interface (Modbus/Jbus) as standard.
Four models available
Cooling capacity: 330 to 500 kW
- LD: Without hydraulic system,
- LDC: With hydraulic system, without tank,
- LDH: With complete hydraulic system and tank. |
|
The Bry-Air EcoTemp Chiller is a self-contained and rugged unit, which ensures reduction in cycle time. It effectively maintains the required mould temperature by lowering the temperature of hot moulds speedily. Its compact and portable design makes it easy to operate, handle and maintain.
Features
- Self-contained, rugged and reliable
- Portable, easy to move, mounted on castor wheels
- Moulded polyethylene water tank
- LED indications for operation status and fault |
|
The Water Cooled Cooling Only Chillers RCUE WG2 are available in wide range from 40 to 240 Hp (134 to 696kW) each unit incorporates the latest developments in screw compressor technology. The compressor's continuous capacity control allows for a 15 to 20% energy saving over step control, this along with the unique electronic control system enables the chiller to precisely maintain a constant outlet temperature independent of cooling load. This benefits not only air conditioning but also industrial process use.
- Screw compressor highly reliable with very low noise and vibration
- Continuous capacity control allows for a 15 to 20% energy saving over step control
- Outlet water temperature controlled precisely independent of cooling load
- Plate type heat exchanger, increased efficiency but with less refrigerant |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Personal Air Conditioners (PACs) use filtered compressed air and vortex tube technology to keep workers comfortable in extremely hot or cold areas. PACs use the Model 855 or 857 Diffuse Air Vest to distribute cooled or heated air over the upper body.
Applications:
Unlike "ice pack" type vests, the PAC offers consistent and continuous cooling to minimize heat stress and increase worker productivity in hot surroundings. The vest allows full range of motion with no airflow restrictions and can be worn under welding leathers or protective clothing. The vortex tube unit, worn on a supplied belt, cools or heats inlet temperature by ±60°F
Vortec PAC's provide effective cooling or heating, and are especially popular for workers operating in or near:
- Foundries
- Boiler Rooms
- Steel Mills
- Glass Plants
- Power Plants
- Forging Shops
- Casting Shops
- Welding Operations
- Sand Blasting-
- Paint Baking Operations
- Powder Coating
- Refrigerated Lockers
- Smelters
- Mines
- Asbestos Abatement
- Hazardous Waste Removal |
|
|
|
