|
|
Various types of fixed and rotating spray heads are specified in this section and are designed to suit a wide range of
applications and installations.
|
|
|
|
|
|
This comprehensive range of tank washing devices have been developed for a number reasons. Primarily this is due to the quest for greater efficiency in all kinds of industrial procedures, but it is also the continuous requirement to assure a constant and higher quality level of product. Environmental considerations are also influential; the need to reduce energy use and the increasing costs involved in the disposal of effluents are also factors. Thus resulting in the need for a cleaning process that produces a totally satisfactory result and is completed using the lowest possible volume of cleaning solution; the right tank washing head can also be energy efficient.
Our range from the classic fixed head to the more sophisticated models has been developed to cope with the most demanding applications. The following basic concepts should be given proper consideration in order to determine the correct washing cycle for each single application, and consequently the most suitable type of tank cleaning device.
|
|
URACA%u2019s tank cleaning heads TWK125-1600 are driven by high pressure water. The characteristic features are compact water jet, minimum displacement circle and minimal pressure losses. For use free on hose or via fixed positioning.
- Operating pressure max:1,600 bar
- Recommended flow rate: 30 - 150 l/min
- Displacement circle min. Ø: 125 mm
- Weight: 10.5 kg
|
|
Lechler tank cleaning nozzles work without expensive and defectprone remote drive systems. They are self-rotating and driven by the cleaning fluid. Most types are available in stainless steel as well as in numerous other materials, e.g. PVDF.
The ingenious design of the orifices insures a powerful cleaning and low water consumption at the same time.
|
|
Whatever you have to clean, from small containers up to big tanks, Lechler offers for nearly every application a large choice of tank cleaning nozzles.
Lechler tank cleaning nozzles work without expensive and defectprone remote drive systems. They are self-rotating and driven by the cleaning fluid. Most types are available in stainless steel as well as in numerous other materials, e.g. PVDF.
|
|
|
|
|
|
Tank Cleaning can be defined as manual or automated. Cleaning can be a simple rinse with water, or cleaning with detergents and chemicals. Or cleaning can refer to sanitizing with cleaning agents that reduce microbial contaminants. No matter what, the end result of effective tank cleaning is the application of appropriate and consistent levels of rinsing, cleaning, or sanitizing at specified intervals. The goal is ultimately to prevent contamination that would alter the safety, identity, strength, quality, or purity of the final product. Spraying Systems Co. manufactures more than 80,000 different spray nozzles and accessories. Included in our line is a large selection of tank washers and tank washing nozzles. As a result, we're more likely to have available a nozzle to suit the needs of your tank washing application. And you can also be assured that the nozzle you select will be the most cost-efficient design possible. Visit our Web site @ www.spray.com for all your tank washing needs.
|
|
|
The VARITOP® Tanktop System may be equipped on choice with spray balls or rotating jet cleaners always in connection with the same basic components.The connections ( interfaces ) are identical. In contrast to spray balls, where the cleaning effect is achieved by wetting the tank wall, rotating jet cleaners have the advantage of an additional mechanical cleaning effect by the slowly rotating fan-shaped jet and the associated interval rinsing. Optimal cleaning provides highest plant availability and product quality. Tuchenhagen rotating jet cleaners are availabe with function monitoring as an option. Each cleaner, whether a cleaning lance or a jet cleaner, can be adapted to the customers requests. A fixed cleaning lance or a rotating jet cleaner can maintain an optimal introduction length and an optimised spray ball.
|
|
TW
Tank Washing Nozzles, Clog Resistant Nozzles
Design Features
* Clog-resistant spiral design
* Energy efficient; uses less water than conventional designs
* Compact design; fits small openings
Spray Characteristics
* Easy to maintain
* Unique patterns that spray in opposing directions
* See LEM for other tank-washing applications
Flow rates: 3.0 to 163 gpm (11.4 to 260 L/min)
|
|
Various types of fixed and rotating spray heads are specified in this section and are designed to suit a wide range of
applications and installations.
|
|
Tornado Nozzles do more …
than simply clean by compressed air blow! Contamination such as dust, swarf or even liquids are loosened by a powerful air-jet. Air turbulence created by the rotating movement traps and effectively removes contamination from the surface. Both rotating arms can be individually adjusted, i.e. the speed of rotations and the jet angle can be adjusted to suit the application. Tornado Nozzles only use compressed air and are absolutely reliable devices. They may also be used in explosion-risk areas.
Cleanroom version
All Tornado Nozzles are available in a cleanroom version. At an operating pressure of 6 bar, they are suitable for cleanrooms with clean-air conditions “class 100” (US Federal Standard 209E).
Tested by the Fraunhofer Institute (Institute for Production Technology) in Stuttgart, Germany.
|
|
|
For superior spray performance at pressures from 300 to 4000 psi (20 to 75 bar) consider WashJet® nozzles. Option includes quick-connect installation options, tungsten carbide inserts and more.
|
|
|
Ionizing Air Knives deliver a curtain of ionized air over a distance to both large and small parts that need cleaning or neutralizing. SCI provides both a standard and a high output airknife with ionization. The AK1200 is our standard ionizing air knife. The AK 2200 is our hi-output ionizing air knife.
|
|
We are specialized in the design and development of BELLEVILLE spring washers or special stackings.
We offer our customers a recognized expertise and a worldwide notoriety in this field.
Our competence has allowed us to solve the most delicate problems in those sectors of very high-tech activities such as offshore, nuclear and aerospace.
Sectors of activity :
-Mechanical covering,
-Aeronautics,
-Aerospace,
-Armament,
-Automotive Industry,
-Household Appliances,
-A1 Racing Cars,
-Packings and Linings,
-Electric Motors,
-Nuclear,
-Offshore,
-Industrial Valves and Fittings
|
|
- High diversity in the plot of the elasticity curves
- High stress forces obtained
- Can play the role of a multi-spiral spring having an elasticity curve perfectly adapted to the problem to be resolved.
Sectors of activity :
-Cryogenics,
-Aeronautics,
-Aerospace,
-Armament,
-Automotive Industry,
-Household Appliances,
-A1 Racing Cars,
-Packings and Linings,
-Electric Motors, Nuclear,
-Offshore,
-Industrial Valves and Fittings
|
|
An ONDUFIL ® spring washer is a round elastic item of the same family as our undulated, Belleville or Diaphragm spring washers, derived from a new manufacturing technology which consists of simultaneously rolling and corrugating a flat wire corresponding to the ring's width.
Due to smaller and smaller overall dimensions, compression forces (dips) in the field of larger and larger elastic deformations, and more and more varied stiffeners attainable with this complementary technology, an ONDUFIL® spring washer affords a perfect solution.
Our integrated design and engineering department using powerful computational software is capable today of responding rapidly to your needs.
Our totally integrated production workshop is capable today of making ONDUFIL® spring washers from a prototype for large manufacturing series production runs.
|
|
Circular washer which are pre-formed with smooth flowing undulations, thus creating a product with spring properties when compressed.
Emmotts is internationally renowned for its range of waved washers used to pre-load bearings in electric motors. Recent development have enabled the company to address diverse applications in situations where relatively high loads are required from limited deflections, for example seals and valves. Split or slotted waved washers can be produced also and materials range from spring and stainless steel to copper and nickel alloys.
|
|
|
When suitably sized, the spring washer allows compensating for machining deviations, expansion plays, and ensures in any case that the ball bearing performs under the best conditions.
|
|
Boker's Wave Spring Washers
Boker's is a metal stamping manufacturer of wave spring washers. Wave spring washers, also called wave washers, generally have several curvilinear lobes. The wave spring washer is an efficient washer for obtaining loads when the load is static or the working range is small and the amount of axial space is limited. Wave spring washers often have three, four, or six waves, however, any number of waves can be produced. By increasing the number of waves, the thickness can be reduced for a given load at the expense of decreasing the amount of deflection and increasing the radial stress. Wave uniformity is important because the load rate doesn’t begin until all waves are evenly loaded.
By sending your product specs Boker's can manufacture your wave spring washers in a variety materials.
|
|
· Single Turn Wave Springs
Single turn Wave Springs are perfect for tolerance take up and preloading an assembly. Smalley Single Turn Springs are coiled not stamped, providing for an affordable, precision load, stainless steel option. Wave Springs are stocked from ½” to 16” in both carbon and stainless steel.
· Bearing Preload
Single turn wave springs are ideal for bearing preload. The wave spring preloads the bearing through its outer race, taking up play in the bearing. By preloading a bearing, you will reduce bearing damage and wear.
Smalley’s Bearing Wave Spring Series comes in metric sizes to match popular bearing sizes. Over 150 standard bearing springs are available from stock, 16mm to 580mm. Specials are available for unique bearing sizes with No-Tooling-Charges™.
|
|
Circular washer which are pre-formed with smooth flowing undulations, thus creating a product with spring properties when compressed.
Emmotts is internationally renowned for its range of waved washers used to pre-load bearings in electric motors. Recent development have enabled the company to address diverse applications in situations where relatively high loads are required from limited deflections, for example seals and valves. Split or slotted waved washers can be produced also and materials range from spring and stainless steel to copper and nickel alloys.
|
|
... see all the products in the category
Springs
|
|
It is common knowledge that adequate know-how is needed to manufacture high-quality cleanroom systems. We subscribe to this completely. And our partners know that ILKAZELL provides first-rate functional room systems. The cleanroom systems by ILKAZELL are the result of our own research and development and are highly cost-effective.
|
|
Clean Room Molding
SAT’s molding division produces high quality UHP components utilizing specially designed molding machines in clean room. We use only certified raw materials and electrically control production quality.
All molding machine components are manufactured to ensure high purity during production. SAT’s UHP components undergo a contamination control process that foresees immediate packaging in heat-sealed double polyethylene bags. The UHP components are then stocked in clean room.
|
|
Description on the activities carried out by Assing SpA in the field of Clean rooms:
Clean rooms (in compliance with ISO 14644-1);
Steril rooms (in compliance with ISO 14644-1, FDA, GMP);
Clean Zone (class 100, 10 or 1) and laminar flow tunnels in conventional chambers;
Screening areas;
Safety labs (P);
Research and Development Labs;
Operation rooms;
Transplant and reanimation rooms;
Operation rooms for animals;
Air flow and passbox;
Uncontaminated labs for forensic analysis;
Particles, thermal, humidity, monitoring and validation;
Feasibility studies, engineering, consulting and certification;
Customer care planning and certified calibrations;
Technical furnishing for Clean rooms;
|
|
|
To ensure our Customers always receive a highly professional service, we are equipped with special design and organisation divisions, mechanical workshops, test areas and spare parts warehouse: a highly efficient, flexible and professional organisation to produce, assemble and test all the components in the Cleanrooms to ensure they comply with the strictest specifications, backed up by a very fast after sales service.
|
|
Benefits
The AirLock cleanroom and other Simplex enclosures help you protect against airborne contaminants, ultraviolet light, temperature fluctuations and even harmful noise. Create either positive or negative pressure environments, depending on your needs. Achieve up to ISO 4 (Class 10) clean levels. Rooms go together easily with a minimum amount of tools. All rooms are modular and easily expand to meet your needs.
No Matter How Small or How Big
AirLock cleanrooms can accommodate very small uses, as small as mini-environments and as large as specialized industrial applications.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
