|
|
Various types of fixed and rotating spray heads are specified in this section and are designed to suit a wide range of
applications and installations.
|
|
|
|
|
|
This comprehensive range of tank washing devices have been developed for a number reasons. Primarily this is due to the quest for greater efficiency in all kinds of industrial procedures, but it is also the continuous requirement to assure a constant and higher quality level of product. Environmental considerations are also influential; the need to reduce energy use and the increasing costs involved in the disposal of effluents are also factors. Thus resulting in the need for a cleaning process that produces a totally satisfactory result and is completed using the lowest possible volume of cleaning solution; the right tank washing head can also be energy efficient.
Our range from the classic fixed head to the more sophisticated models has been developed to cope with the most demanding applications. The following basic concepts should be given proper consideration in order to determine the correct washing cycle for each single application, and consequently the most suitable type of tank cleaning device.
|
|
URACA%u2019s tank cleaning heads TWK125-1600 are driven by high pressure water. The characteristic features are compact water jet, minimum displacement circle and minimal pressure losses. For use free on hose or via fixed positioning.
- Operating pressure max:1,600 bar
- Recommended flow rate: 30 - 150 l/min
- Displacement circle min. Ø: 125 mm
- Weight: 10.5 kg
|
|
Lechler tank cleaning nozzles work without expensive and defectprone remote drive systems. They are self-rotating and driven by the cleaning fluid. Most types are available in stainless steel as well as in numerous other materials, e.g. PVDF.
The ingenious design of the orifices insures a powerful cleaning and low water consumption at the same time.
|
|
Whatever you have to clean, from small containers up to big tanks, Lechler offers for nearly every application a large choice of tank cleaning nozzles.
Lechler tank cleaning nozzles work without expensive and defectprone remote drive systems. They are self-rotating and driven by the cleaning fluid. Most types are available in stainless steel as well as in numerous other materials, e.g. PVDF.
|
|
|
|
|
|
Tank Cleaning can be defined as manual or automated. Cleaning can be a simple rinse with water, or cleaning with detergents and chemicals. Or cleaning can refer to sanitizing with cleaning agents that reduce microbial contaminants. No matter what, the end result of effective tank cleaning is the application of appropriate and consistent levels of rinsing, cleaning, or sanitizing at specified intervals. The goal is ultimately to prevent contamination that would alter the safety, identity, strength, quality, or purity of the final product. Spraying Systems Co. manufactures more than 80,000 different spray nozzles and accessories. Included in our line is a large selection of tank washers and tank washing nozzles. As a result, we're more likely to have available a nozzle to suit the needs of your tank washing application. And you can also be assured that the nozzle you select will be the most cost-efficient design possible. Visit our Web site @ www.spray.com for all your tank washing needs.
|
|
|
The VARITOP® Tanktop System may be equipped on choice with spray balls or rotating jet cleaners always in connection with the same basic components.The connections ( interfaces ) are identical. In contrast to spray balls, where the cleaning effect is achieved by wetting the tank wall, rotating jet cleaners have the advantage of an additional mechanical cleaning effect by the slowly rotating fan-shaped jet and the associated interval rinsing. Optimal cleaning provides highest plant availability and product quality. Tuchenhagen rotating jet cleaners are availabe with function monitoring as an option. Each cleaner, whether a cleaning lance or a jet cleaner, can be adapted to the customers requests. A fixed cleaning lance or a rotating jet cleaner can maintain an optimal introduction length and an optimised spray ball.
|
|
TW
Tank Washing Nozzles, Clog Resistant Nozzles
Design Features
* Clog-resistant spiral design
* Energy efficient; uses less water than conventional designs
* Compact design; fits small openings
Spray Characteristics
* Easy to maintain
* Unique patterns that spray in opposing directions
* See LEM for other tank-washing applications
Flow rates: 3.0 to 163 gpm (11.4 to 260 L/min)
|
|
MCCS-3000 Wash, Rinse, Blow-Off
Standard Description:
JRI's Modular Conveyorized Cleaning Systems are our premier line of pass-through cleaning units. Available as modular units, these systems can be purchased as part of a complete cleaning solution.
The MCCS-3000 is our wash, rinse, and blow-off unit and includes a host of refinements that will make this one of the most reliable machines on your floor. With a compact footprint, 200 gallons of solution capacity for each tank, an powerful regenerative blow-off system, and our generous pump and heat offerings, this machine is a full production cleaning machine!
|
|
Sediment Screens, made of 26-gauge premium coated steel, rest at the bottom of the tank to catch grime as it settles and allows for easy cleaning during solvent change.
Parts Basket, constructed of 26-gauge premium coated steel, speeds parts washing by carrying numerous smaller parts to be washed in a single action.
|
|
The UES tank systems are offered in a modular construction with flexible tank volumes from 4 kg - 105 kg and selectable hose connections from 2 to 16.
The electronic control with LED display, 4-line display or large-surface touch screen with multi-lingual display, enables simple operation of the hot glue system.
A wide range of options are available for optimum integration - from the removable display through to the additional pump. Integrated signal and control contacts enable communication with the central production control.
The tank systems are connection-compatible with Nordson® or other systems.
|
|
| ... products without technical information |
| |
FinnSonic FSG-121 is a reliable medium power ultrasonic generator with Power Booster and Frequency Sweep.
It's unique Power Booster gives additional boost for tough cleaning applications. FinnSonic FSG-121 is available in 30 kHz or 40 kHz frequency.
Features
* 1,2 kW nominal ultrasonic power
* Available in 30 kHz or 40 kHz frequency
* Cabinet mounting
* Power, Sweep and Booster controls with outer signals
* Protection and automatic reset against short circuit, overcurrent, low voltage and overtemperature.
|
|
Generators (power supplies) create the high frequency energy that produces cavitation in the cleaning tank. Branson offers the broadest spectrum of equipment in the industry, including both magnetostrictive equipment and piezoelectric units with features like line/load regulation, true variable power control, sweep frequencies, power modulation and power monitoring.
|
|
Power Sonics has several exclusive individual portable ultrasonic generators to significantly improve quality, reliability and performance of ultrasonic cleaning equipment and power our line of transducers.
GM Generator is a completely redesigned generator featuring IGBT technology and has a unique load compensating circuit that is particularly effective in gaseous solutions. A replaceable and cleanable filter is included over the air-cooling fan. The GM replaces the GL generator and provides the same improved cavitation and uniformity under less than ideal operating conditions. These generators power both the Type IP immersible transducers and the CT Type tanks (Transducerized Console Tanks).
|
|
are tried and tested devices which have been specifically developed for the high demands of industrial cleaning technology.
Due to their modular design they are perfectly suited for all applications.
• Constant power output – continuously adjustable
between 40 – 100 %
• Constant oscillation amplitude
• Interface for monitoring and controlling
process-relevant functions
• Protection from short-circuit, no-load operation,
overload and overheating comes as standard
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
Other frequencies available on request
|
|
|
|
|
|
State of the Art Ultrasonic Generator Technology
Blackstone-NEY Ultrasonics is a recognized leader in ultrasonic generator technology (Technical papers). Starting with the introduction of sweeping frequency in 1988, there has been a continuous stream of development and patents covering new ultrasonic generator and transducer technology from Blackstone-NEY Ultrasonics. Entire families of generators meeting the specific needs of a growing list of applications are now available.
multiSONIK™ 2
Blackstone~NEY Ultrasonics introduces the multiSONIK™2 Multiple Frequency Ultrasonic Generator. Representing a major breakthrough in ultrasonic parts cleaning technology, the multiSONIK™2 is an advanced, digital ultrasonic generator that provides the ability to select and program single or multiple frequencies in a single process tank.
The multiSONIK™2 generator, featuring Blackstone~NEY Ultrasonics' patented dual sweep technology, can operate at frequencies of 40, 80, 120, 140, 170, 220 and 270 kHz according to a binary coded input. When it is teamed with our unique universal transducers, cleaning performance is optimized to a level that is unmatched using conventional ultrasonic cleaning hardware.
...
|
|
Ultrasonic Generator Specification:
- Chassis case designed to allow access from all sides
- Case for generator complete with power lead
- Full range of variable frequency sweep control
- Full range of variable power control
- On/Off switch with output power indicator
- 240v, 50hz supply
- Maximum 750 watt power output (nominal 500watt)
- Utilising MOSFET technology
- Fully tried and tested in the field
- Fully protected against open and short circuit output
- CE certified
|
|
ITF ultrasonic devices are the result of many years of tests cooperating with electronic experts and have got all the advantages which up-to-dated technology can offer nowadays.
Particularly:
• Weight and volume reduction so to permit one single-card execution for any generator.
• Wide range of controls and safety features in compliance with European Standards.
• DEGAS feature reducing time taken to get baths degassing.
• Microprocessor used to manage output and variation, control and self-diagnostics. This also permits to get remote diagnostics since there is the opportunity of a modem connection, the opportunity to set output power to supply transducers of different power and the opportunity to drive more transducers with one generator.
|
|
SINAPTEC developed a complete range of generators of energy to be associated with an ultrasonic applicator.
* The NEXUS puts: this generator of power ultrasounds is a simple solution and economic in an industrial environment. Its obstruction minimum and its design allow an easy integration in a cupboard or other. The parameter setting by switches makes it possible to use the mode of frequency controlled or modulated for a homogeneous distribution of the ultrasonic field.
* The NEXUS rack: by assembly from 1 to 3 racks; Maintenance is facilitated by the maximum dismantling of the racks.1600Wc by rack. Orders on the generator or off-set.
|
|
| ... products without technical information |
| |
|
|
|
|
Tunnel of pretreatment spray a stage is a machine of washing/pretreatment constituted from a static monoroom to or more stages.
It comes employed on those manufatti to deal where us is a limited production and the spaces available for the location of the same machine are reduced (treatment cycles which the sgrassaggio, pickling, washing, washing pure water demi or demi, phosphating, disodissidazione, chromate treatment etc.).
The tunnels of pretreatment to spray generally are realized essentially from (possible varying to chosen of the Customer):
- Bathtub for the control of the liquid
- Thermal Covering
- Body advanced tunnel
- Slides of water-drainage
- Filters
- Sent Elettropompe of fluid to the rampe of spray
- Organs of interception and regulation
- Pipages of connection between collectors, pumps and bathtub
- Rampe of spraying door-nozzles
- Nozzles and fascette with attack
- Instruments for the visualization of the temperature and the pressure
- Riscaldatori bathes
- Termoregolazione
- Control levels
- Fan of aspiration vapors
Al fine to offer a complete service to own Customers AIRMADI painting S.r.l is in a position to delivering systems "turnkey", contemplating in own range all those auxiliary members and accessories which groups of breaking in and extraction air, systems of defangazione, flottatori, disoleatori, dosatori automati to us, demineralizors, depuratori, centers them of heating, groups of breaking in, systems of ultrafiltration, chemicals, etc. (for further information to consult the section auxiliary).
|
|
| ... products without technical information |
| |
|
|
