Brakes
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Torque: 100,000 Nm - 29,100,000 Nm
Electro hydraulic disc brake as operating brake for applications with a high number of movements FEHD Generation 2, the new generation of electrohydraulic brakes from VULKAN offers a ...
VULKAN Marine
Torque: 120,000 Nm - 7,000,000 Nm
Electrohydraulic drum brake as operating and holding brake If the operating brake is not often required for maneuvering, an ELECTROHYDRAULIC BRAKE can be used, available ...
VULKAN Marine
Torque: 15,000 Nm - 11,545,000 Nm
... compensation for brake pads, brake position sensors, warning sensors for worn brake pads, automatic or manual brake ventilation and brake pads made from ...
VULKAN Marine
Torque: 0.23 Nm - 9 Nm
Rotational speed: 4,500 rpm - 10,500 rpm
... overexcitation and power reduction. The ROBA®-servostop® Cobot is a closed-circuit, electromagnetic safety brake. When the brake is applied, a rotor disc with friction lining pads is ...
Chr. Mayr GmbH + Co. KG
Torque: 1.5 Nm - 100 Nm
Rotational speed: 3,000 rpm - 20,000 rpm
... A-bearing side and the B-bearing side of servomotors. The ROBA®-servostop® is a closed-circuit, electromagnetic safety brake. When the brake is closed, the rotor is held between the armature disk ...
Chr. Mayr GmbH + Co. KG
Torque: 0.31 Nm - 11.5 Nm
Rotational speed: 4,500 rpm - 21,000 rpm
... spring-applied safety brake for servomotors ✓ Slim design ✓ High power density ✓ Low energy consumption ✓ Simple assembly Slim brake for installation both in the A-bearing side and in the B-bearing ...
Chr. Mayr GmbH + Co. KG
Torque: 1.3 Nm - 4,166 Nm
... available on the market; the torque of the Extreme pneumatic brake is constant, stable and linear over time also varying the working temperature. Thanks to all these features, Extreme pneumatic brake ...
Re S.p.A.
Torque: 1.2 Nm - 330 Nm
Rotational speed: 1,200 rpm - 3,000 rpm
Power: 700 W - 12,600 W
Combiflex pneumatic brakes, since 1974, have been representing the benchmark for the converting industry and most of all for corrugated machines. Mounted on the roll stand unwinders, they represent the best solution to ...
Re S.p.A.
Torque: 2 Nm - 5 Nm
Rotational speed: 40 rpm - 2,000 rpm
Power: 75, 24, 70 W
... produces a wide range of electromagnetic powder brakes for converting industry. The experience gained during years, thousands of applications, the constant research into materials and the studies carried out on brakes ...
Re S.p.A.
Torque: 0.5 Nm - 0.7 Nm
Braking force: 300 N
... application. When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is only recommended to use the brake only as a holding brake and not as an emergency ...
Torque: 1.5, 0.5 Nm
Electronic brake for all NEMA23 motors The electronic brake is designed to be mounted on step- and servo motors, such as the MAC050, MAC095m, MAC140 or MAC141 series of integrated servo motors. Brake ...
Torque: 1.7, 4 Nm
... vertical linear application. When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is recommended to use the brake only as a holding brake and not ...
Torque: 0.2 Nm
Spring-applied brake, operates when no current is applied. The special design of this brake makes it suitable for static breaking. Axial play in the motor has no influence on brake ...
Dunkermotoren GmbH
Torque: 0.4 Nm
This power-on brake is available on request for batches above 500 pieces.
Dunkermotoren GmbH
Torque: 1 Nm
Spring-applied brake, operates when no current is applied. The special design of this brake makes it suitable for static breaking. Axial play in the motor has no influence on brake ...
Dunkermotoren GmbH
Torque: 0.2 Nm - 5 Nm
Rotational speed: 40 rpm - 3,000 rpm
Power: 15 W - 50 W
Electromagnetic particle output shaft brakes MEROBEL’s EMP output shaft Brakes are compact and very easy to use for applying a variable torque to a rotational system. MEROBEL’s EMP FAS – FRAS series ...
Torque: 2 Nm - 1,000 Nm
The most popular range of MEROBEL’s electric Brakes, offering tailored solutions with 10 sizes covering a range from 2Nm up to 1000Nm (nominal torque values). With 5 different versions referring to cooling options ...
Torque: 0.018 Nm - 56.5 Nm
Product Description Hysteresis Brake Dynamometers (HD Series) are versatile and ideal for testing in the low to medium power range (maximum 14 kW intermittent duty). With a Hysteresis Braking system, the Dynamometers ...
MAGTROL
Torque: 6.5 Nm - 28 Nm
... readouts and software. As with all Magtrol Hysteresis Dynamometers, engine loading is provided by Magtrol’s Hysteresis Brake, which provides: torque independent of speed, including full load at 0 rpm; excellent repeatability; ...
MAGTROL
Torque: 0.3 Nm - 560 Nm
Eddy-Current Brake Dynamometers (WB Series) are ideal for applications requiring high speeds and also when operating in the middle to high power range. Eddy-Current Brakes provide increasing torque as ...
MAGTROL
Torque: 1.5 Nm - 600 Nm
Rotational speed: 3,000 rpm - 6,000 rpm
... unique system developed by INTORQ, brakes can be assembled to fit almost any task. You benefit from the wide variety of options, fast project planning and rapid delivery. further explanation: INTORQ BFK458 Double-brake - ...
Kendrion (Villingen) GmbH
Torque: 0.24 Nm - 4 Nm
Power: 5.2 W - 12.4 W
Spring-applied brake INTORQ BFK551 Wherever there is only a very limited installation space available and a powerful brake is still required, we are sure to be “new fans”. Developed from the requirements ...
Kendrion (Villingen) GmbH
Torque: 0.27 Nm - 8 Nm
Rotational speed: 5,000, 4,000, 6,000, 3,000, 2,500 rpm
Power: 5.8 W - 27.2 W
... electromagnetic brakes are usually the method of choice. As safety brakes they bring moving masses to a stop, keep loads in position and therefore prevent humans and material assets from being affected. For ...
Kendrion (Villingen) GmbH
Torque: 0.3 Nm - 2 Nm
Power: 6 W - 15 W
... closed-current spring-applied brakes. This brake solution is characterised by a particularly compact construction, and is designed for small loads. The type 08 can be used as a service brake ...
KEB Automation KG
Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W
... current spring-applied brake, and is used in applications with tough ambient conditions around the world. The standard brake conforms to protection class IP66, with hand-release IP65. The brake ...
KEB Automation KG
Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W
... current spring-applied brake. It has been manufactured by KEB for over 50 years and is used throughout the world in a wide range of applications. The brake can be used both as a service brake ...
KEB Automation KG
Torque: 0.024 Nm
Rotational speed: 5,000 rpm
Power: 5 W
FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00
Kählig Antriebstechnik GmbH
Torque: 0.024 Nm
Rotational speed: 5,000 rpm
Power: 6.6 W
FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00 - Optional hand breather
Kählig Antriebstechnik GmbH
Torque: 0.1 Nm
Rotational speed: 5,000 rpm
Power: 9 W
FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00 - Optional hand breather
Kählig Antriebstechnik GmbH
Modular rotor lock for on- and off-shore wind power plants Locking cylinder to fix rotors of large off-shore wind power plants for maintenance work.
Torque: 0 ft.lb - 30,000 ft.lb
Braking force: 57.6 kN
The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications ...
The Hilliard Corporation
Torque: 0 ft.lb - 1,600 ft.lb
Braking force: 4,226 N
The Hilliard A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied ...
The Hilliard Corporation
Torque: 0 ft.lb - 6,000 ft.lb
Braking force: 14,234 N
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring ...
The Hilliard Corporation
Torque: 14, 29, 75, 600 Nm
... Our pneumatic brakes can be combined with all our air motors. The combination of motor with brake is widely used for winches, cranes and positioning devices. All brakes are built ...
The Nexen Ball Screw Brake is a high-torque, spring-engaged brake acting on the machined end of a ball screw. It serves as a primary or redundant safety brake to prevent back driving ...
Torque: 100,000 Nm - 29,910,000 Nm
Braking force: 1,110 N - 52,920 N
Electro hydraulic disc brake as operating brake for applications with a high number of movements FEHD Generation 2, the new generation of electrohydraulic brakes from VULKAN offers a ...
VULKAN Industry and Energy
Torque: 120,000 Nm - 7,000,000 Nm
Rotational speed: 700 rpm - 5,000 rpm
Electrohydraulic drum brake as operating and holding brake If the operating brake is not often required for maneuvering, an ELECTROHYDRAULIC BRAKE can be used, available ...
VULKAN Industry and Energy
Torque: 15,000 Nm - 11,545,000 Nm
... compensation for brake pads, brake position sensors, warning sensors for worn brake pads, automatic or manual brake ventilation and brake pads made from ...
VULKAN Industry and Energy
Torque: 4 Nm - 1,600 Nm
... released disk brake powered by direct current. Designed for braking rotating machine parts and their precision positioning. Utilized as safety brake. Various options of executions are at disposal with ...
Cantoni Motor
Torque: 4 Nm - 500 Nm
... released disk brake powered by direct current. Designed for braking rotating machine parts and their precision positioning. Utilized as safety brake. Various options of executions are at disposal with ...
Cantoni Motor
Torque: 4 Nm - 1,600 Nm
HIGH LEVEL OF SAFETY Safety considerations have required designing a braking mechanism with dual safety circuit, also 2H2SP series meet strict safety regulations related to elevator design and installation defined in EN 81-1+A3:2009 ...
Cantoni Motor
Braking force: 400 N - 880,000 N
... escalators, drawworks and dam turbines. Svendborg Brake Products from Howdon Hydraulic Brakes Hydraulic Power Units Soft Braking Controls Couplings Yaw Systems Thruster Brakes ...
Howdon Torque limiters
Braking force: 21,990, 25,920 N
An active brake where oil pressure needs to be applied - in order to brake. There are no springs in this kind of caliper. The BSAB brakes are multi piston Dual-Action brakes ...
Howdon Torque limiters
Braking force: 0 kN - 113 kN
... 75 is an active brake where oil pressure needs to be applied - in order to brake. There are no springs in this kind of caliper. This brake can provide clamping force up to 140,000 N. ...
Howdon Torque limiters
Torque: 150 Nm - 7,000 Nm
Braking force: 0 N - 0 N
Rotational speed: 150 rpm - 400 rpm
... activated? The FPC safety brake is activated when the rate of descent exceeds a preset value, generally between 30% and 50% above the rated speed of the application. This device uses centrifugal force to lock the ...
EIDE
Torque: 130, 45, 260 Nm
Rotational speed: 0 rpm - 15,000 rpm
Power: 4,500, 12,000, 24,000 W
... rated speed is 1000, 1500 or 1800 rpm. In the event of motorization or motor brake failure, the EC brake is activated and controls the lowering of the load. Centrifugal brake is mounted ...
EIDE
Torque: 35, 21, 45, 23 Nm
... maximum safety and at the same time test them without having to uninstall the DBQ centrifugal brake. Both the locking brake and the centrifugal brake cannot prevent the accident if the ...
EIDE
Torque: 7 Nm - 3,600 Nm
Rotational speed: 1,800 rpm - 4,200 rpm
Power: 7 W - 150 W
Electromagnetic multidisc type brake Tension: 24 V dc – 0% + 15% Application: in oil bath – for dry application at very low rpm only Mounting: The brake is fastened to a wall or on a ...
MWM FRENI-FRIZIONI
Torque: 20 Nm - 3,600 Nm
Power: 13 W - 150 W
Multidisc electromagnetic brake. Tension 24 V dc – 0 + 15%. Used in oil bath. The brake is fastened to a wall with the hub (8) splined to the shaft to be braked.
MWM FRENI-FRIZIONI
Torque: 100 Nm - 6,000 Nm
Power: 6 W - 162 W
Electromagnetic brake with front toothing, operation with milled flange EC/Z-F Tension 24 V dc – 0 + 15% Used for dry and oil applications. Used for dry and oil bath applications. It must be engaged ...
MWM FRENI-FRIZIONI
... materials. - Drilling block in Material SWR - Drilling block in Material RCI - Drilling block in Material 704 + SWR - Brake lining preformed drawwork for conical clutch - Suitable roll friction material SWR
... way that it comes into contact at the top with the spring steel sheets and expands at the bottom around the brake shoes. This lifts the brake shoes from the rail, making it freely moveable. LinClamp ...
Torque: 0 Nm - 160 Nm
... the crucial zones of the brake. The caliper unit is built into the half-housing, ensuring that the entire brake is strong and produces low noise levels. Extreme is lightweight and easy to apply in place ...
Torque: 300 Nm
Braking force: 2.5 kN - 30 kN
SITEMA Safety Brakespneumatic for compressive load
Safety Locks Secure restraining of lifted loads Compact and safe The design principle allows for the creation of highly compact clamping heads. They are ideal for applications involving purely static securing. Series KRG, KRGP For ...
Torque: 0 Nm - 240 Nm
Braking force: 0 N - 880 N
... , manually adjustable brake caliper is designed as a holding and tension (continuous duty) brake for light and medium load applications in general mechanical engineering with a braking force up to 880 ...
Deutsche van Rietschoten & Houwens GmbH
Torque: 0 Nm - 460 Nm
Braking force: 0 N - 1,650 N
This brake is used in handling systems and general mechanical engineering. The braking force of this mechanically applied brake is 1,650 N. Purely mechanical brakes are often sufficient ...
Deutsche van Rietschoten & Houwens GmbH
Torque: 0 Nm - 1,200 Nm
Braking force: 0 N - 5,000 N
The brake caliper is designed for higher braking forces. It can be directly mounted onto the gearing, for example, due to its side mounting. The maximum braking force is 5,000 N. Purely mechanical brakes ...
Deutsche van Rietschoten & Houwens GmbH
Torque: 400,000 Nm
“Low-speed” brake.Caliper safety disc brake direct acting at the board disc of a rope drum.Load crash security and protection ( also reacting in case of gear shaft fracture). Direct-acting / Without ...
Römer Fördertechnik GmbH / RFT
Torque: 200 Nm - 23,800 Nm
DISC BRAKE TYPE RSTN / SERVICE BRAKE About the product “Fast speed” brake Torque adjustable For brake disc ø 250 mm to ø 1250 mm With “SLM” synchro-lifting-mechanism ...
Römer Fördertechnik GmbH / RFT
Torque: 0 Nm - 10,000 Nm
... between brake lining and brake drum) Optimal when using an automatic wear adjustment (AVN) Optionen Mechanical limit switch protection “Brake open”, “Brake close”, ...
Römer Fördertechnik GmbH / RFT
The Carlisle Brake & Friction 1100 Series Brake Valve provides excellent pressure control up to 3500 psi (240 bar). With single and tandem styles available and backed by Carlisle’s commitment to quality, ...
Carlisle Industrial Brake and Friction
BRAKE SHOES Carlisle Brake & Friction's Brake Shoes are an excellent way to replenish your shoe core banks, as well as assure a quality foundation for your fleet’s brake ...
Carlisle Industrial Brake and Friction
Carlisle Brake & Friction's CF2000 brake block friction offers performance characteristics proven to extend and maintain brake life and performance. Carlisle Cohesive Friction brake ...
Carlisle Industrial Brake and Friction
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining