|
|
Tilt and pour drum
82A Series drum palletizers place or retrieve a drum at the corners of a pallet. You can rotate a drum 360 degrees end-over-end, then tilt drum to pour.
- Lock drum at horizontal to dispense at up to 26" high
- Lock at vertical to prevent spills
Drum Palletizers pour a drum beyond the V-shaped base (shown above). Standard 55-gallon steel drum in horizontal position reaches 18.5" beyond the wheels.
The 82A Series drum palletizers handle a 22.5" diameter 55-gallon steel drum. They accept Diameter Adaptors for various smaller drums.
Capacity: 800 Lb.
Base Dimensions of drum palletizers
- 48.5" wide, 39" long
- Overall length: 42.5"
- Legs are 9" high and reach 20.75" in front of upright stanchion
- Turning radius: 53"
- (2) 4" swivel casters at back
- (2) 6" wheels at front
- Counterweighted for stability |
|
Description
Mobile manual push pull system with pneumatic or electrical features.
Basic unit consists of stacker/straddle type mobile frame with 4 free rotating castors (2 braked). Powered up/down pillar with either battery or pneumatic operation and 1500mm of stroke. White FDA approved slot cover to offer GMP. Basic execution in StSt304 with 180 grit finish. 100Kgs customer load capacity. |
|
Features
1000 lb. capacity
18" load centers
Lifting heights of 48" through 86"
1" thick x 3" wide x 30" long solid steel forks
15-1/2" high fork backs
Optional drum grabber attachment
Forks bolted at 15" I.D. for 55 gallon drum
Forks bolted at 11-1/2" I.D. for 30 gallon drum |
|
- Easy to lift,transport and tilt 55 gallon drum.
- Available to carry the drum to rack(lower than 1350mm).
- Tilt the drum 120ˇă for oil empty.
- Compact and reliable mechanism system fo fix drum.
- It can lock a drum in vertical position to avoid spills or horizontal position for draining through a faucet.
- Easily lift with pedal when unload. |
|
| ... products without technical information |
| |
Open or sealed transfer of solids from drums to process equipment
Flexicon "open-chute" and "lift-and-seal" drum dumper models accommodate all popular drum sizes and are available in carbon steel with durable industrial finishes, or in stainless steel with material contact surfaces finished to industrial, food or pharmaceutical standards. All models can discharge directly into process equipment or into hoppers equipped with outlets for connection to Flexicon flexible screw or pneumatic conveyors, or to other process equipment.
|
|
Fully Automated Drum filling equipment :
- 4 on a pallet Net-Weight
- In-Line Net-Weight with orientation and bung removal |
|
| ... products without technical information |
| |
MISCELLANEOUS
HANDLING
For applications with high mechanical constraints, LAPP MULLER offers a large range of cables with a very good resistance to elongation, breaking, climatic and chemical environment. Lapp Muller works for reelers and gantry crane manufacturers, for ports and airports.
- MULARFLEXŇ
Complete range of reeling cables (with optical fibers, bus conductors…) which can resist to very high mechanical constraints as traction, weight, compression
- 400 HZ CABLES
Multipurpose, very flexible cables, they’ve got a good resistance to abrasion, to weather conditions, to skydrol, to kerosene and to other products used on the airport traffic areas
- FLAT CABLES
Control and power cables for gantry cranes with special environment as for instance fleets of container
These companies trust us :
DELACHAUX, CAVOTECH, PORT AUTONOME DE MARSEILLE et DU HAVRE, SOLLAC DUNKERQUE, AEROPORT DE PARIS….
|
|
- Zecflex Type: round cable for fitted with body reel, external sheath PVC
- Delflex Type: round cable for fitted with body reel, transparent external sheath
- Drumflex Type: round cable for open reel (multiturn or single loop)
- Flexaf Type: flat cable for reel single loop
NB: All the cables below have a green/yellow driver except the cables 2 drivers. The cables with 1 driver are cables yellow green/for earthing or with the mass. |
|
Cable especially designed for the reels of opened the drum type, external sheath yellow polyurethane, very high resistor with traction and torsion.
Braid as yarns polyester coated in the sheath with the cable.
According to DIN standard VDE 0295 Classifies 6. 0,6/1kV.
Use: high frequency of use of the reel, extreme uses, long duration... |
|
| ... products without technical information |
| |
| Heating sleeves to heat segments of 200 litre barrels per DIN. both the inner and the outer sheath of the barrel heating sleeve are made of aluminium sheet, which ensures maximum protection of the electrical components against mechanical damage. A hinge with campling closure that divides the heating surface into two semi shells permits convenient assembly, without the heating element needing to be bent. The barrel can be heated complete by using 3 sleeves. |
|
DRUM HEATERS - for 200 litre barrels.
Drum Heaters facilitate the handling of solidified or viscous materials like adhesives, waxes, tar, chemicals, oils etc. They eliminate cumbersome methods and high investments, associated with steam and oil or fire wood heating.
Construction
Drum Heaters consist of a cylindrical metal cover carrying the flexible heating elements. A 2" thick thermal lagging of glass wool provides insulation and the metal casing makes for a rugged unit that can be wrapped snugly around the drum. The Drum Heater is hinged, and is mounted on castors for convenience. A base heater, also encapsulated in metal provides bottom heating. Control Panel incorporating thermostatic control is provided with the heaters. |
|
| ... products without technical information |
| |
Industrial Clutch Parts manufacture a variety of industrial clutches, brakes, couplings & rotary unions for the global power transmission markets. Product line covers applications in industries such as: oil & gas, marine, pulp & paper, metalworking, mining, & textiles. Directly replaces Eaton Airflex®, Croft®, Renold®s, Fawick® etc.
|
|
Simple to be intalled and compact; the Airing radial units are engaged by an air tube and can be used as drum brakes (in stopping and holding applications) or clutches (to connect two shafts directly or through a pulley).
Maximum torque from 40 to 4 000 Nm.
The high thickness friction pad and the reliable air tube ensure high performances and low maintenance cost. |
|
The DC and DCV constricting drum clutches and brakes are found all throughout industry in general power transmission duties.
Constructed using an integral rim and tube actuator, the DC has low inertia and high misalignment capacity, offering a simple solution to less arduous clutch and brake requirements.
A full range of options is available: Dual flanges for back to back mounting giving double torque capacity. Multiple air inlets for increased response speed. Split construction to avoid removal of the shafts on in-line drives. And wether you require just the friction shoe or mounting pins, or a complete actuator and rim assembly, all are backed by the Wichita name for service and reliability
|
|
EBH
Application:
- Slewing, Trolley, Gantry, Conveyor belts
Advantages:
- Easy maintenance
- High performance
- Robust design
- Horizontal arrangement possible
- Compact construction
Technical data:
- Dimensions acc. to DIN 15435
- Adjustable brake torque
- Brake torque 200-4000 Nm
- Brake drum diameter 200-500 mm
- Weight 27-173 Kg
|
|
... see all the products in the category
Brakes
|
| ... products without technical information |
| |
Filtration of:
Emulsions and synthetic dissolutions.
Most common applications:
Any work with cutting tools in general, grinding, washing etc., where a medium filtration quality is required.
Nominal filtration quality:
From 30 to 100 µm, depending on the used type of filter band
Flow rates:
700 ... 2.000 l/min and more
|
|
Filtration of:
Emulsions, synthetic dissolutions and cutting oil.
Most common applications:
Any work with cutting tools in general, grinding, etc., wherever a medium cleaning efficiency is necessary.
Nominal filtration quality:
From 30 to 100 µm, depending on the filtration material used in the drum
Flow rates:
100 to 400 l/min
|
|
| ... products without technical information |
| |
|
|