|
|
100% Efficiency for every picking task
No other material handling process is more dependant on the operator than order picking. Process studies show the time spent off the truck can be as high as 90% of the picking cycle. The new GPC 3000 Series of low-level order pickers was designed around the entire picking process with superior driving performance, fatigue-reducing comfort, and a significant number of features which reduce and simplify the operator's movement when performing tasks both on and off the truck. The result is enhanced productivity, safety and durability through Crown's innovative design, advanced technology and robust construction.
Crown's GPC 3000 Series also features models with lifting forks and scissors-lift forks for an ergonomic advantage in high-throughput applications.
|
|
Cat Lift Trucks' order pickers are the best. Why? Because there%u2019s a picker for every single warehouse application, and because each order picker is designed with operator comfort in mind.
The more comfortable the operator, the more ergonomic the controls, then the quicker the picking and the more achieved per shift. In addition, several functions can be pre-programmed, for example to limit top speed, if safety requires it; or to limit fork-lowering speed when handling fragile goods.
|
|
CAPACITY: 1.5t
ORDERPICKER
Heavy-duty Class "H" insulated, SepEx™ motor is high-starting torque type, ball bearing armature shaft mounting.
24 volt industrial-type lead acid battery.
Disc brake is mounted directly on motor shaft greatly multiplying brake power through the double reduction transmission.
Interlocking I-beam type mast with heavy-duty ball bearing rollers.
Heavy-duty Class "H" insulated, series-wound motor with gear pump mounted inside hydraulic reservoir.
Control logics use Curtis 1243 SepEx™ traction control and directly control the lift system as well as providing for 180º electronic power steering.
|
|
One shelving for several tiers
META multi-tier shelving systems, overbuild big spaces and can be used all-purpose due to a lot of accessories.
Furthermore strategically favorable circulation gangways could be arranged, circulation spaces be integrated
and therefore the logistic procedures are optimized. Thus META multi-tier shelving make short picking sequences possible!
|
|
Compactus® Double Decker: focus on ultimate space efficiency
Compactus® Double Decker offers the best space efficiency for higher buildings. This innovative concept combines all the benefits of Compactus® Power3 and a multi-tier construction.
|
|
The ppbRAE 3000 is the most advanced handheld volatile organic compound (VOC) on the market. Its Photoionization Detector’s (PID) extended range of 1 ppb to 10,000 ppm makes it an ideal instrument for applications from HazMat/Homeland Security, industrial hygiene, to Indoor Air Quality and military applications.
The patented sensor provides the following unique features:
- a 3-second response time
- extended range up to 10,000 ppm with improved linearity
- humidity compensation with inbuilt humidity and Temperature sensors
Key Features
- Proven PID technology
- Real-time wireless data transmission with built-in RF modem or
Bluetooth.
- Design for service Easy access to lamp and sensor in seconds without tools.
- Big Graphic display for easy overview of gas type, Correction Factor and concentration.
- Field interchangeable battery pack in second’s without tools.
- Integrated Flash Light for better view in dark conditions
- User friendly screens including plot view chart view
- Built-in full RAE Systems 350 compounds correction factors list measure more chemicals than any other PID
- Multilanguage support with 10 languages encoded
- Rugged housing withstands use in harsh environments
- IP67 Waterproof design for easy cleaning and decontamination in water
- Strong protective removable Rubber Boot.
|
|
2020ppbPRO, stable, linear, and rugged hand-held portable photoionization detector, is equipped standard with a new high performance 10.6 eV lamp, and has an optional 11.7 eV lamp for ionizing chlorinated compounds. The UV lamp is easy to remove and has a new lamp condition assessment indicator for cleaning or replacement.
Textured grip and large keys make the 2020ppbPRO easy to carry and use, even while wearing triple-layer gloves. The large 8-line backlit display is easy to read with large fonts. Flexible operation to meet monitoring requirements User selectable interval time (1 to 900 seconds) Display readings in ppb, ppm, or mg/M3.
2020ppbPRO is Intrinsically Safe to North American and ATEX standards for use in potentially explosive environments. Expanded internal datalogging for up to 200 hours of 1 minute interval sampling points. Zero calibration through the use of an activated charcoal multi-use pre-filter tube by Dräger. Dedicated calibration key.
|
|
| ... products without technical information |
| |
SCOTC Oil tank to control
Description:
- Controller level/temperature.
- Tanks including opening of filling and air filter.
Advantages:
- Reduction of the obstruction of the tanks: 4 functions in 1!
- A simple adjustment of the points of commutation via the menu
- An analogical exit
- A protected control
- Reduction of the logistic costs, assembly and maintenance
Applications:
- Control of level/temperature of hydraulic tanks.
|
|
Regulators ENR guarantee the respect of the parameters of the process by a precise and effective regulation of the level and/or temperature.
The ENR20 is a relay regulator with 2 contacts. The ENR30 has in more one independent contact.
Assembly on symmetrical rail DIN 35 mm
Dimensions: l=45 mm h=75mm p=105mm
ENR20
- threshold of level: 2
- contacts: 1 reverser
- indication: 2 LED
- capacity breaking max.: 6A
- temporization: 0... 10 S
- output voltage: 12... 14V
- output current: 8mA
ENR30
- threshold of level: 3
- contacts: 2 reversers
- indication: 2 LED
- capacity breaking max.: 6A
- temporization: 1 S approx.
- output voltage: 12... 14V
- output current: 8mA
|
|
Regulation through an Inverter by means of a 4/20mA output signal.
Proportional injection to the instantaneous flow EC, pH or ORP regulation in a fluid network Regulation of a MultiFertic® Injection pump with several injection modules.
Injection of up to four different chemicals or additives.
- Liquid Crystal Display of:
- Instant Flow in (m3/h) or (GPM)
- Conductivity in (mS)
- PH
|
|
The Tensilica XPRES (Xtensa PRocessor Extension Synthesis) Compiler is a powerful TIE language synthesis tool that creates tailored Xtensa processors from native C/C+ code.
You can use the XPRES Compiler, coupled with Tensilica's proven Xtensa Processor Generator technology, to generate highly optimized processor hardware RTL directly from the C/C reference code or algorithmic specifications, eliminating the need to have an intimate knowledge of TIE.
|
|
The microswitches MP210 & derivatives are snap-action changeovers,
simple or double switching action, connection by directly overmoulded cable.
By wiring the 5 terminals in different combinations, you can obtain electrical
circuits to 3, 4 or 5 wires.
|
|
The microswitches MP210 & derivatives are snap-action changeovers,
simple or double switching action, connection by directly overmoulded cable.
By wiring the 5 terminals in different combinations, you can obtain electrical
circuits to 3, 4 or 5 wires.
|
|
The core parts of our adjustable systems are the pumps PA and PB. The flexible connections, which need only minimal space, as well as the possibility of attaching the pumps in any position even outside a system, gives the designer the possibility of installing the Ergoswiss System in very thin or complex objects.
Our pumps lift weights up to 1000 kg quietly, and are stepless and completely synchronous - even with an asymmetrical load. They are powered by an electric drive or a hand crank.
The pumps and cylinders are connected by a hydraulic hose (Ø 4 mm). The maximal hose length is 8m. The minimal bending radius 25 mm. Three attachment holes are provided fort he installation of the pumps. The pump housing is made of an extruded aluminium sheath and is colourless anodized.
|
|
Maximum Cylinder load 150 kg; please check also the maximum system load
Cylinder stroke up to 600 mm
The Cylinder requires an external guide mechanism. Please take care that there is no side load on the Cylinder
The tube connections and the piston rods can be combined in the way you prefer
|
|
|
|
