|
|
Walkie Stacker Truck Specifications
Model
WCN30
Load Capacity
(lb)
3000
Maximum
Travel Speed (mph)
Loaded 2.1
Empty 2.5
Maximum
Lift Speed (fpm)
Loaded 31
Empty 42
Maximum
Lower Speed (fpm)
Loaded 47
Empty 26
Rt Angle Stacking Aisle
(in)
127.0
|
|
This is a complete range of pedestrian, platform, stand-on and double stackers, offering travel distances from 10 to 50 meters plus, with lifting capacities up to 2.0 tonnes, at up to 6.5 meters high.
With seven models to choose from, you are sure to find one that suits your requirements. Cat Lift Trucks stackers are available with a range of options to suit different warehouse layouts
|
|
Walkie Stacker Truck Specifications
Model
WCN30
Load Capacity
(lb)
3000
Maximum
Travel Speed (mph)
Loaded 2.1
Empty 2.5
Maximum
Lift Speed (fpm)
Loaded 31
Empty 42
Maximum
Lower Speed (fpm)
Loaded 47
Empty 26
Rt Angle Stacking Aisle
(in)
127.0
|
|
Cat Lift Trucks' order pickers are the best. Why? Because there%u2019s a picker for every single warehouse application, and because each order picker is designed with operator comfort in mind.
The more comfortable the operator, the more ergonomic the controls, then the quicker the picking and the more achieved per shift. In addition, several functions can be pre-programmed, for example to limit top speed, if safety requires it; or to limit fork-lowering speed when handling fragile goods.
|
|
High level order pickers
- Two and three stage masts with Freelift covering lift heights from 3200mm to 8250mm
- Battery change equipment
- Cold store protection
- Adjustable forks
- Horizontal and vertical guide rollers
- Wire guidance
|
|
Apart from optimizing the warehouse layout to match the frequency of access to various goods, the next best thing for saving time and money is your choice of order picker. Order pickers are the busy bees of the warehouse.
Some 80% of orders involve just 20% of stock lines, and stacking and picking at low levels is a cheaper option than at higher levels. Getting the right warehouse layout and the right order pickers are crucial to your Return On Investment.
|
|
|
|
|
|
CAPACITY: 1.0t - 2.0t
ELECTRIC WALKIE STACKER: COUNTERBALANCED
Electric lift/lower controls in handle with pressure compensated valve for constant lowering in all conditions.
State-of-the-art transistor controller requires nonconductors to control separately excited drive motor.
Drive motor controller is fully programmable with service tool handset.
Travel speed and direction is controlled by ergonomically correct handle and operable with either hand.
Monitors load weight and automatically adjusts torsion bar suspension mechanism to provide optimum loading on drive tire to reduce steering effort and provide proper braking traction.
Double reduction 22 to 1 gear ratio with helical and spur-cut gears for quiet operation and smooth power transfer.
Drum brake is mounted on drive motor armature shaft to greatly multiply braking power through the double-reduction transmission.
CAPACITY: 1.0t - 1.5t
ELECTRIC WALKIE STACKER: STRADDLE
Electric lift/lower controls in handle with pressure compensated valve for constant lowering in all conditions.
State-of-the-art transistor controller requires no conductors to control separately excited drive motor.
Drive motor controller is fully programmable with service tool handset.
Travel speed and direction is controlled by ergonomically correct handle and operable with either hand.
Monitors load weight and automatically adjusts torsion bar suspension mechanism to provide optimum loading on drive tire to reduce steering effort and provide proper braking traction.
Double reduction 22 to 1 gear ratio with helical and spur-cut gears for quiet operation and smooth power transfer.
Drum brake is mounted on drive motor armature shaft to greatly multiply braking power through the double-reduction transmission.
|
|
Walk behind, Step-on, Stand-on, Sit-on, our pallet movers gives operators flexible operation modes. Designed to offer more capacity over various distances and heights, these Electric Pallet Movers are an excellent solution for the compact warehouse.
- Pedestrian Power Pallet Trucks - 1.3 ~ 2.0 ton Capacity
- Platform Double Stacker Trucks - 1.6 ton Capacity
- Sit-on Stacker 1.5~2.0 ton Capacity
- Platform Stacker Trucks - 1.2 ~ 1.6 ton Capacity
- Stand on Stacker Trucks - 1.2 ~ 2.0 ton Capacity
|
|
2,200 - 3,500 lb electric stackers
Short-haul-repeaters. The N-Generation stackers are ideal for repetitive stacking applications where travel distances are minimal, such as storage and staging areas, skid, cart or work-table applications. Depending on your lift height requirements the heavy duty stackers can be fitted with either a two-stage or three-stage mast.
Model Type Power Capacity
PMWF11N Fork-Over 2x12V 2,200
PMWT11N Straddle 2x12V 2,200
PMWT15N Straddle 24V 3,000
PMWT18N Straddle 24V 3,500
|
|
General descritpion
2,200-3,500 lb Capacity Light-Duty And Heavy-Duty Walkie Stackers
Our electric walkies are built tough. To ensure dependable performance, the frames are rigorously tested and fully loaded at 100 percent of their rated capacity for 60,000 cycles. With one of the shortest head lengths in the industry, the 2WP4500-2WP6000 series offers an extremely tight turning radius, allowing for ease of operability and better productivity.
|
|
CAPACITY: 1.5t
ORDERPICKER
Heavy-duty Class "H" insulated, SepEx™ motor is high-starting torque type, ball bearing armature shaft mounting.
24 volt industrial-type lead acid battery.
Disc brake is mounted directly on motor shaft greatly multiplying brake power through the double reduction transmission.
Interlocking I-beam type mast with heavy-duty ball bearing rollers.
Heavy-duty Class "H" insulated, series-wound motor with gear pump mounted inside hydraulic reservoir.
Control logics use Curtis 1243 SepEx™ traction control and directly control the lift system as well as providing for 180º electronic power steering.
|
|
- Low Level Order Picker - 1.0 ton Capacity
- Low Level Order Picker - 1.0 ~ 2.0 ton Capacity
- Low Level Order Picker with Tiller Arm - 2.0 ton Capacity
|
|
High Level Order Picker - 0.8 ~ 1.0 ton Capacity
- NOH08K 800 (kg)
- NOH10K 1000 (kg)
- NOH10KC 1000 (kg)
- NOH10KH 1000 (kg)
|
|
OPB Series
Low Level Order Pickers |
1.0 - 2.0 tonnes
Our versatile low level order pickers allow rapid preparation of orders at first and second pick heights. With comfortable driver compartments, user-friendly controls and efficient fly-by-wire steering, you have everything you need to maximise throughput.
OPBM/H Series
Medium and High Level Order Pickers |
0.8 - 1.0 tonnes
To reach high into your warehouse for preparation of orders, you%u2019ll need one of our high level order pickers. Their advanced technology, driver-friendly controls, high standards of comfort and impressive performance mean increased productivity and happy customers.
|
|
Tow Tractor Specifications
Model
SGN200
Tow Capacity1
(lb)
10,000
Rated Drawbar Pull
(lb)
200
Maximum Travel Speed (mph)
Loaded 5.0
Empty 8.7
Battery
Compartment
(in)
W 32
L 13.5
|
|
Tow Tractor Specifications
Model
SGN200
Tow Capacity1
(lb)
10,000
Rated Drawbar Pull
(lb)
200
Maximum Travel Speed (mph)
Loaded 5.0
Empty 8.7
Battery
Compartment
(in)
W 32
L 13.5
|
|
Class Name：Loader->E series wheel loader
ZL35E Wheel Loader
- Rated Power (kw): 92 (I25hp)
- Operating Weight(kg): 10600
- Rated Load(kg); 3500
|
|
... see all the products in the category
Loaders
|
|
|
