Stainless steel pumps

Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve ...

Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...

Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C

... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...

Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C

ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based ...

Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C

External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact ...

Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 50 bar
Fluid temperature: -20 °C - 100 °C

ECO.pump external gear pump Competent at metering viscous media up to 200,000 mPas, the ECO.pump lends itself to many common applications. The stainless steel ...

Flow: 0 us gal/min - 37 us gal/min
Head: 0'00" ft - 145'00"
Power: 0.5 ch

... faces; all metal components of AISI type 300 stainless steel running in protected oil chamber Elastomers: BUNA-N Suction Strainer and Motor Shell: Constructed of AISI type 304 series ...

Flow: 0 us gal/min - 4,000 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 560'00"

The Series e-1510 base mounted end suction pumps deliver the highest efficiencies, performance and durability. All pumps feature stainless steel impellers and an expanded ...

Flow: 0 us gal/min - 2,300 us gal/min
Pressure: 175 psi
Head: 0'00" ft - 400'00"

... close-coupled, end suction pump with footless volute has been designed to offer the highest overall efficiencies in the market for HVAC and plumbing applications. With the largest “Efficiency Island” compared to other ...

Flow: 0 l/min
Pressure: 0 bar
Head: 0.5 m - 10 m

Electromechanical assembly in AISI 304 chrome-nickel steel, for submerged operation, fitted with 2 (two) opposing mechanical seals in silicon carbide and alumina graphite in oil sump with food-grade oil lubrication, and ...

Flow: 0.5 l/s - 18.4 l/s
Pressure: 0 bar
Head: 0.96 m - 14.9 m

Electromechanical assembly in CF-8M (AISI 316) stainless steel, for submerged operation. Seal set comprising 2 (two) silicon carbide mechanical seals assembled opposing and with oil lubrication. Oil bath motor.

Flow: 0.5 l/s - 12.5 l/s
Pressure: 0 bar
Head: 0.92 m - 17.8 m

Electromechanical assembly in CF-8M (AISI 316) stainless steel, for submerged operation. Seal set comprising 2 (two) silicon carbide mechanical seals assembled opposing and with oil lubrication. Oil bath motor.

Pressure: 0 bar - 0.772 bar

... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...

Pressure: 0 bar - 0.848 bar

... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...

Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar

... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...

Flow: 0 m³/min - 6 m³/min
Head: 0 m - 180 m
Power: 22 kW - 110 kW

The LH-14-series is a submersible stainless steel casting high head corrosion-resistant pump designed for handling aggressive and corrosive liquids. The all wetted parts are made of 316 ...

Flow: 0 m³/min - 1 m³/min
Head: 0 m - 120 m
Power: 11, 22 kW

... LH-W-14-series is a submersible stainless steel casting high head corrosion-resistant pump having dual impellers designed for handling aggressive and corrosive liquids. The all wetted ...

Flow: 0 m³/min - 2.2 m³/min
Head: 0 m - 45 m
Power: 0.4 kW - 11 kW

The SFQ-series is a submersible stainless steel casting high head corrosion-resistant pump designed for handling aggressive and corrosive liquids. The all wetted parts are made of 316 ...

Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...

Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...

Flow: 1.8 m³/h - 150 m³/h
Pressure: 10.3 bar - 34.5 bar
Fluid temperature: -40 °C - 149 °C

... 316L stainless steel product contact surfaces standard; 316L stainless steel or electropolish of all product contact surfaces optional Stainless steel ...

Pressure: 0.06 MPa
Weight: 500 g

... resistance of the pipette pump components: (1) Pump head material: aluminium alloy; (2) Piston material: stainless steel. 06 End position optical detection End ...

Flow: 50 l/h - 990 l/h
Pressure: 0 bar - 10 bar
Weight: 38, 48 kg

... left-hand side. dosing pumps with the head on the right-hand side can be supplied. Duplex dosing pumps are available with the head combinations shown in the following tables. The heads are arranged in ...

Flow: 2.4 l/h - 30.7 l/h
Pressure: 1.5 bar - 20 bar
Power: 25 W

The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision of a motor-driven ...

Flow: 2.4 l/h - 30.7 l/h
Pressure: 3 bar - 20 bar
Power: 25 W

Precision that inspires The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision ...

Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

Flow: 0.5 m³/h - 8 m³/h
Pressure: 0 bar - 100 bar
Head: 0 m - 45 m

... ranging between 0.5 to 8 m³/h, and cannot be realised with a reactor pump. For this reason, Egger has developed a pilot pump S that meets all requirements for commercial process pumps. ...

Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C

... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, ...

Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm

... Series Eccentric Disc Pumps have been designed to provide premium performance and the ultimate in full containment and safety in chemical-processing applications. They feature a unique seal-less design with a double stainless-steel ...

Flow: 1 m³/h - 36 m³/h
Pressure: 16, 6, 10, 9 bar
Length: 445 mm - 906 mm

... Disc Pumps have been designed for use in a wide range of pumping applications in the food, cosmetic and pharmaceutical industries, all of which require extremely hygienic operations. They feature a unique seal-less design ...

Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW

HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...

Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW

HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...

Flow: 14 l/h - 140 l/h
Pressure: 1 bar - 4 bar
Power: 0.18 kW - 0.25 kW

... - TUBE PUMP / ALBIN PUMP Specifications: Flow rate: up to 140 l/h (97 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, NBR, ...

Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m

... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable ...

Flow: 0 m³/h - 800 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 160 m

Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 Standardized and modular design Flanges according to ISO 7005 PN 16 For stainless steel execution ...

Flow: 0 m³/h - 280 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 140 m

... magnetic drive horizontal centrifugal pump to ISO 5199 and ISO 2858 /EN 22858 100% leak free Long life cycle, reduced maintenance costs Flanges according to ISO 7005 PN 16 For stainless ...

Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with ...

Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

Internal gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD ...

Flow: 120, 100 m³/h
Pressure: 30 bar
Head: 65 m

... centrifugal pump designed for high media temperatures for boiler water application and district heating applications up to 180°C. Concept Features: • Duplex stainless steel shaft. • ...

Flow: 7.2 m³/h
Power: 550 W
Fluid temperature: 110, 80 °C

Vertical pumps are ideal for transferring corrosive fluids. With no wearing parts such as mechanical stops or seals, they are guaranteed leak-free. SIEBEC offers plastic (PP or PVDF) and stainless steel ...

Flow: 10 m³/h
Power: 750 W
Fluid temperature: 110, 80 °C

Vertical pumps are ideal for transferring corrosive fluids. With no wearing parts such as mechanical stops or seals, they are guaranteed leak-free. SIEBEC offers plastic (PP or PVDF) and stainless steel ...

Flow: 14 m³/h
Power: 1,100 W
Fluid temperature: 110, 80 °C

Vertical pumps are ideal for transferring corrosive fluids. With no wearing parts such as mechanical stops or seals, they are guaranteed leak-free. SIEBEC offers plastic (PP or PVDF) and stainless steel ...

Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m

The PIVOT Series AODD Pumps ranges from 3/8" to 3". Available in metallic and non-metallic materials such as aluminium, ductile iron, stainless steel, polypropylene, ...

Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m

... diaphragm (AODD) pumps are available in metallic materials such as Aluminium, and Stainless Steel, with an extensive range of diaphragms, seats and balls. They offer ...

Flow: 200 l/min
Pressure: 1 bar - 8 bar
Head: 8 m

... 1” (25 mm) Air Operated Double Diaphragm Pumps made of cast metal can reach a flow rate of up to 200 l/min (52 gal/min) and they offer a wide range of construction materials and porting configurations. ...

Flow: 0 us gal/min - 990 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F

Compact C Pump delivers reliable performance to the maximum duty requirements of your application in a compact package. Features include suction lift capability up to 28 feet, positive ...

Flow: 0 us gal/min - 1,850 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F

The Epsilon Pump is a line of technically engineered progressing cavity pumps designed to give least whole life costs and reduced spares requirements. The Epsilon Pump incorporates ...

Flow: 0 m³/h - 225 m³/h
Pressure: 0 bar - 12 bar
Fluid temperature: -10 °C - 100 °C

... design has no effect on flow and pressure • Low running speeds reduces wear for a longer working pump life; ideal for abrasive applications • Stainless steel cast components and fasteners ...

Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW

... Construction Pump body - - cast iron Pump shell - - steel Cover - - PBTP Intake strainer - - steel Impellers - - PBTP Shaft - - steel Mechanical ...

Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW

... Construction Pump body - - cast iron Cover - - cast iron Impellers - - CrNi-steel Shaft - - CrNi-steel Diffusers - - CrNi-steel Mechanical seal - - SiC O-rings ...

Flow: 780, 1,000 l/min
Head: 33, 50 m
Power: 1.7 kW - 7.48 kW

Stainless Steel Immersion Pumps are centrifugal pumps of compact design with the impeller mounted directly onto the extended motor shaft. The TVG pump ...