- Hydraulics - Pneumatics >
- Valve >
- Stainless steel solenoid valve
Stainless steel solenoid valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 1.3, 1.8 mm
Voltage: 12, 24 V
Temperature: 0 °C - 55 °C
... Fast response time • Low heat rise/low power • Robust stainless steel "Spider" flat armature spring • Designed to accommodate large flows with more stroke Specifications *********** Valve ...
Clippard
DN: 0.23 mm - 1.8 mm
Voltage: 20, 10 V
Temperature: 32 °F - 120 °F
... Extremely low hysteresis • Fast response time • Large flows in a small, sleek design • Low heat rise/low power • Robust stainless steel "spider" flat armature spring • CE, RoHS compliant
Clippard
DN: 8 mm
Voltage: 24, 12 V
Temperature: 32 °F - 122 °F
... direct actuating valves offer an extremely fast response time for accurate dosing of minute volumes with the same long life you expect from the original Clippard EV line of electronic valves, now in a ...
Clippard
DN: 1.5 mm - 6.2 mm
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 20 bar
DN: 0.5 mm - 0.7 mm
Voltage: 6, 12, 24 V
Temperature: 0 °C - 50 °C
... performances » Manifold mounting » Long life » Version for use with oxygen available Thanks to their particular design these valves can be used in applications where very compact solutions are required as well as ...
CAMOZZI AUTOMATION
DN: 3.6 mm
Voltage: 6, 12, 24 V
Temperature: 0 °C - 50 °C
... Manifold mounting » Long life Series K8B pilot operated solenoid valves represent the evolution of Series K8 which has been equipped with a flow amplifier. Their particular design makes these valves ...
CAMOZZI AUTOMATION
DN: 1.5 mm - 4 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 140 °C
... Series CFB Stainless Steel direct acting solenoid valves for general purpose, 2/2-way and 3/2-way NC, are the ideal solution for a wide range of applications whereby ...
CAMOZZI AUTOMATION
DN: 1.5 mm - 25 mm
Voltage: 24 V - 240 V
Temperature: -30 °C - 120 °C
EV210B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV210B are a very robust valves program with high performance and can be used in all kind of ...
Danfoss Industrial Automation
DN: 8 mm
Voltage: 12 V - 220 V
Temperature: -15 °C - 50 °C
... Hz): 30 Max input pressure (bar): 010 Max torque for coil nut (Nm): 1 Response time (ms): 8÷15 Product series: Valve PIV on base Time (Cycles): 25 million Type: Electro-pneumatic on base Voltage tolerance: ...
DN: 15 mm
Voltage: 24 V - 220 V
Temperature: -10 °C - 50 °C
• Possible assembly on single and multiple bases • Monostable manual actuation as standard • Assembly in any position • Operation with filtered lubricated or unlubricated • Low power absorption Quantity per package: 0 Minimum ...
Temperature: -10 °C - 180 °C
... stopper pneumatic valves (series PV-FLUID*) and ball or butterfly valves with a rotary actuator (series RV-FLUID*). Solenoid valves can be classified according to their ...
DN: 1 mm - 6 mm
Voltage: 24, 110, 230 V
Temperature: -10 °C - 80 °C
... controlled solenoid valve operates without differential pressure up to 90 bar, even in closed media circuits. It is therefore perfect for high-pressure and dispensing applications. • Extensive pressure ...
FESTO
DN: 40, 50, 13.5, 27.5 mm
Voltage: 24, 230, 110 V
Temperature: -10 °C - 80 °C
... pressure: force pilot operated pneumatic valves VZWF control high pressures with high nominal diameters using relatively small solenoids. • High flow rates • Large nominal diameters with relatively ...
FESTO
DN: 13 mm - 50 mm
Voltage: 110, 230, 24 V
Temperature: -10 °C - 60 °C
The poppet valve with diaphragm seal for control of air or water is suitable for all-purpose use with either medium. • Brass or stainless steel casting design • Electrical connection ...
FESTO
DN: 10 mm - 50 mm
Voltage: 24 V - 240 V
Temperature: -20 °C - 60 °C
Pilot Operated 2 Port Solenoid Valve (2 Way Valve) ・For air, water, oil, heated water, high-temperature oil ・Body materials: Aluminum, Resin, C37, Stainless steel, ...
DN: 2, 4, 3, 5 mm
Voltage: 12 V - 230 V
Temperature: -30 °C - 90 °C
... actual application. Brass, stainless steel (316L) and polypropylene bodies are offered. The solenoid coils are moulded with a chemically resistant epoxy. Since the coil system is separated ...
BÜRKERT FLUID CONTROL SYSTEMS
Voltage: 12, 24, 220, 230 V
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 50 bar
PNEUMAX offer a vast range of solenoid valves in brass and stainless steel designed to control air, water, steam and all fluids that are compatible with the materials ...
PNEUMAX
Temperature: -50 °C - 150 °C
Pressure: 12 bar
Stainless steel brand series have been engineered and developed to meet process automation and Oil & Gas severe service requirements, where material performances, product reliability and health and safety ...
PNEUMAX
Temperature: -10 °C - 130 °C
Pressure: 10 bar
... following configuration: •Solenoid-spring valve •Solenoid-solenoid valve Pneumax solenoid valves have 1/4” ...
PNEUMAX
DN: 6.5 mm
Voltage: 12, 24 V
Temperature: 49, 135 °C
... -way axial flow solenoid valves are designed to perform consistently under conditions that are far more demanding than typical high-speed dispensing applications. Featuring a welded stainless ...
DN: 6.5 mm
Voltage: 12, 24 V
Temperature: -20 °F - 275 °F
IEP Series 2-way in-line solenoid valves are designed to perform consistently under extreme operating conditions. Featuring a welded stainless steel construction, these ...
DN: 12.7 mm - 63.5 mm
Voltage: 12 V - 240 V
Temperature: -194 °C - -184 °C
... Series 210 is a line of economical, high-flow solenoid valves for liquid, corrosive, and air/inert gas service. With a wide range of pressure ratings, sizes, and resilient materials, the ultra-reliable ...
ASCO
DN: 8 mm
Voltage: 230, 24, 110 V
Temperature: 5 °C - 98 °C
2/2-way solenoid valve of nominal diameter DN 8 for liquid dispense. This valve is direct acting and normally closed (NC). Valves of this design are medium separated ...
A. u. K. Müller
DN: 5 mm
Voltage: 6 V
Temperature: 5 °C - 70 °C
2/2-way solenoid servo-controlled valve of DN 5 in bistable version, for the control of potable water. The valve is especially suitable for use in electronically controlled, battery driven ...
A. u. K. Müller
DN: 7 mm
Voltage: 12 V - 240 V
Temperature: 5 °C - 90 °C
2/2-way solenoid valve of nominal diameter DN 7 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed ...
A. u. K. Müller
DN: 7 mm - 21 mm
Voltage: 12, 24 V
Temperature: 0 °C - 50 °C
... concept • Compact - 80% reduction of volume vs standard threading solenoid valves • Improve mobility/portability - 80% reduction in weight vs standard threading solenoid valves ...
Parker Fluid Control Division - Europe
DN: 2.3, 0.8, 1.6 mm
Voltage: 24 V
Temperature: 0 °F - 149 °F
Electrically controlled valves, Series 3/2 A-EVC, for vacuum and compressed air applications. Three body styles to choose from: • Manifold Mount A-DI: For mounting directly to a Mounting Plate. Gaskets and screws ...
DN: 0.25, 0.125 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 130 °C
Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with ...
JAKSA SOLENOID VALVES
DN: 0.25, 0.375 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 130 °C
Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical ...
JAKSA SOLENOID VALVES
DN: 0.375, 0.25 mm
Voltage: 12, 24, 230 V
Temperature: -10 °C - 130 °C
Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 / ISO 4400) Long ...
JAKSA SOLENOID VALVES
DN: 1.6 mm
Temperature: -20 °C - 90 °C
Pressure: 0 bar - 20 bar
Material: Housing: Brass · Pin and spring: Stainless steel · Seals: NBR Power input: DC 5 W / AC 6.5 VA
DN: 6 mm
Temperature: -10 °C - 90 °C
Pressure: 0 bar - 1 bar
Material: Housing: Brass · Pin and spring: Stainless steel · Seals: NBR LED - no Clock rate - 2000 cycles/min. AC [VA] - 10.0 DC [W] - 6.0
DN: 0.75 in - 3 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C
PL1020 REMOTE CONTROL PULSE SOLENOID VALVE, NORMALLY CLOSED Application : Compressed Air , dust collector services Size : 3/4" …3" Pressure : 0,5 - 8 bar Internal Parts : - Stainless ...
SMS-TORK
DN: 0.125 in - 2 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C
SS1010 Series Stainless Steel 2 way Solenoid Valve is well-fitted for the production of air, water, acid, and other harsh substances. Its tube and internal parts are ...
SMS-TORK
DN: 0.375 in - 2 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C
... : Water, air, gas, acid, chemical material Size : 3/8"…2" Working Pressure : 0,5…16 Bar Core, Tube : Stainless Body : Stainless Seal : NBR; on request Viton, EPDM Fluid Temperature ...
SMS-TORK
DN: 4.5 mm
Voltage: 12, 6 V
Pressure: 0 bar - 7 bar
Wetted metal materials - Nickel-plated brass, stainless steel, brass Wetted non-metallic materials - FKM(Optional) Dimension - 14.6*14.6*41.15 No. of ports - 2 Power - 2.5W Structure ...
DN: 4.5 mm
Voltage: 12, 5 V
Pressure: 0 bar - 7 bar
... materials - FKM(Optional) Dimension - 16*17. 55*51.46 No. of ports - 2 Power - 2.8W Structure - N.C pressure compensation valve Main Features - 1. Good sealing effect and large flow 2. Low hysteresis 3. High ...
DN: 5 mm - 50 mm
Voltage: 12 V
Temperature: -20 °C - 80 °C
... is the largest solenoid valve manufacturer in India and a leading global solenoid valve supplier. Since 1967, Rotex has served over 7000 customers across 73 countries ...
Rotex Automation Limited
DN: 24, 6, 12, 40 mm
Voltage: 6 V - 240 V
Temperature: -25 °C - 70 °C
MOC: Aluminium | Brass | SS316 Solenoid: Weather Proof | Explosion Proof Media:Air | Inert Gases Application: Operation of double acting Cylinder/ Actuator Certificate: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO ...
Rotex Automation Limited
DN: 6 mm - 50 mm
Voltage: 12 V
Temperature: -20 °C - 80 °C
Rotex offers a wide range of 5 Port Solenoid Valves to suit variety of applications. These valves are Universal (for mixing or diverting function) based on the valve ...
Rotex Automation Limited
DN: 0.05 mm - 2 mm
Voltage: 5 V - 24 V
Temperature: 0 °C - 50 °C
... up to 70 bars Applications: flow and pressure regulation, Venturi, vacuum Manifold mount, barb or flange on request Stainless steel or brass, FPM, EPDM, PTFE seal. Suited for precision dosing in instrumentation, ...
gevasol
DN: 4.5 mm
Voltage: 5 V - 24 V
Temperature: 5 °C - 50 °C
Pressure compensated, high turn-down ratio proporional solenoid valve. Designed primarily for flow and pressure regulations of non-corrosive gases. In a compact size of 17 mm diameter, it can regulate ...
gevasol
DN: 0.8 mm - 4 mm
Voltage: 12 V - 48 V
Pressure: -1 bar - 12 bar
General purpose high flow proportional valve. Orifice up to 4 mm. Versatile seal (NBR, FPM, EPDM, PTFE, etc...) and body material (stainless steel, brass, Aluminum or ...
gevasol
DN: 0.5 in - 2 in
Temperature: 180 °C
Pressure: 0.3 bar - 16 bar
... pneumatic valve works: Valve body: The pneumatic valve has a body that contains all the necessary components. The body is designed to allow the passage of air or gas and to accommodate ...
DN: 8 mm
Voltage: 24 V - 230 V
Temperature: -40 °C - 85 °C
High pressure solenoid valve for hydrogen refuelling - 500 bar - DN 8 - 2/2 NC - ATEX Based on the 1000 bar version, the HyValve 500 solenoid valve offers a smaller ...
ALPHA AUTOMATISMES Sarl
DN: 15 mm
Voltage: 230, 24 V
Temperature: -40 °C - 85 °C
High pressure solenoid valve for hydrogen distribution - 500 bar - DN 15 - 2/2 NC - ATEX With the largest orifice size currently available on the market, the specialised high-pressure hydrogen dispensing ...
ALPHA AUTOMATISMES Sarl
DN: 0.5 mm
Voltage: 230, 24 V
Temperature: -50 °C - 85 °C
High pressure solenoid valve for hydrogen refuelling - 1000 bar - DN 0.5 - 2/2 NC - ATEX In our range of specialised solenoid valves for hydrogen dispensing, this ...
ALPHA AUTOMATISMES Sarl
DN: 0.375 in - 4 in
Voltage: 110, 230, 12, 24 V
Temperature: -30 °C - 180 °C
... Temp & seal o ring Circumstance Temp-10° C to 70° C Main Features Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application ...
UFLOW AUTOMATION
DN: 0.375, 0.5 in
Voltage: 230, 12, 24, 110 V
Temperature: -30 °C - 180 °C
... 70° C Media Air, Water, Chemical, Gas, Oil, Steam, LPG. Main Features Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application ...
UFLOW AUTOMATION
DN: 0.5 in - 2 in
Voltage: 230, 12, 24, 110 V
Temperature: -10 °C - 180 °C
Pilot Operated Piston Type Steam Valve (NC/NO) Valve Information Port: - Refer below technical data sheet (Available BSP / NPT) End Connection: - Screwed / Flange Body Material: - SS ...
UFLOW AUTOMATION
DN: 1.5 in - 56 in
Voltage: 12, 24, 110, 220 V
Temperature: -15 °C - 80 °C
Model BTE / BFE, a Solenoid Control Valve is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. We manufacture both ...
DN: 1.5 in - 14 in
Voltage: 110, 220 V
Temperature: -15 °C - 80 °C
A Solenoid Control Valve is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. Providing precise pressure control ...
DN: 1.5 in - 12 in
Voltage: 220, 110 V
Pressure: 0 bar - 144.2 bar
Model DTE / DFE , A solenoid control valve with diaphragm design, is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. ...
DN: 13 mm - 50 mm
Voltage: 24, 230 V
Temperature: -20 °C - 130 °C
• Seat valve with diaphragm • Pilot operation. • Closed without current (NC) • Special joints NBR FKM, EPDM • Material: brass, stainless steel
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- ROTEX stainless steel solenoid valves
- JAKSA stainless steel solenoid valves
- A. u. K. Müller stainless steel solenoid valves
- Clippard stainless steel solenoid valves
- PARKER stainless steel solenoid valves
- PNEUMAX stainless steel solenoid valves
- Asco stainless steel solenoid valves
- JAKSA solenoid valves
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining