|
|
Valves and jointsInfo-Catalogue
Control and regulation of liquid.
Orobica Plast-Gom produces gaskets for butterfly valves, joints according to DIN - ISO - CLAMP - S.M.S. - BS - IDF standards for alimentary, pharmaceutical and chemical industries.
|
|
An expansion joint suitable for small diameter pipes where a screwed connection rather than a flange is required. Twin sphere design for high movements. Loose male thread.
DN 20 - DN 65
|
|
O-rings
LJF® is the world’s third largest producer of O-rings. The many references produced at the Château-Gontier and Bezons sites are intended for three major markets: automotive, aeronautical and general industry.
|
|
- Seal between casing and multi-function manifold
- Noxious gas regulation valve for blow-by environments
- Single or multi-passage seal for ensuring leak tightness in a plastic or metallic groove
- Clipped gasket to ensure tightness between the cylinder head and the cylinder head cover.
- Multi-use sealing to prevent circulation of a fluid
- Connection tube between two casings / plates for passage of fluid under pressure and high flowrate.
- Static seal cover between the torque converter and the gearbox
- Transfer part for oil circulation between a control box and a gearbox.
- Piston with sealing lip for automatic gearboxes
- Disk brake piston dust cover
- Tube cap seal for fuel tank flap.
- Micro-precision seal for explosive applications (airbags, etc.)
- Dynamic and acoustic sealing for windshield wiper devices.
|
|
| ... products without technical information |
| |
The protection allows the articulated head to be guarded against external agents such as dust, chemical and atmospheric agents, etc.
Material:
Black Neoprene, resistant at temperatures from -30°C to + 120°C
Advisable for protection from:
oil, grease, chemical agents, saline mist
|
|
Exhaust line seals
Ball joint seal connecting engine to manifold exhaust line
Catalytic converter components : mesh, support, spacer, seals, gaskets
E.G.R. components
|
|
Trelleborg S may be specially designed for pressures, temperatures, chemicals, lengths, diameters and shapes: round, square, rectangular, conical etc., according to requirements.
DN 25 - DN 4000
|
|
- Engine sealing for rotating shaft
- Flange -mounted engine seal for rotating shaft
- Detection of the crankshaft angular position for engine control
- Detection of the speed and position of an actuator
- Oil seals of injection pump connection elements
- Casing static seal
- Bonded pistons with low coefficient of friction for automatic gearboxes (AT + CVT)
- Seal for the gearbox rotating shaft
- Speed and/or position detection for gearboxes
- Bearing seal with integrated friction track
- Bearing seal with integrated friction + magnetic track
- Magnetic pulse ring to detect the wheel speed
- Magnetic target for detection of the angular position of the steering wheel
|
|
O-rings
LJF® is the world’s third largest producer of O-rings. The many references produced at the Château-Gontier and Bezons sites are intended for three major markets: automotive, aeronautical and general industry.
|
|
| ... products without technical information |
| |
The two twin-channel PME modules (MP85 and MP85DP) from HBM provide the optimum solution for monitoring press-fit and assembly operations.
Almost any commercially available transducer can be connected to the amplifiers which operate synchronously and in parallel. The industrial design and the standardized CANopen and Profibus DP interfaces, or digital I/Os alternatively ensure optimum connectivity to the automation environment.
Features and benefits:
Twin-channel amplifier
Comfortable integration into automation system via field bus interfaces
Intelligent signal conditioning and powerful algorithms for monitoring of the fitting process
Results can be saved directly in SPC format
Industrial design.
|
|
|
|
|
|
The PRO Module was developed for the monitoring of assembly and test applications. Its electronics are housed in a compact enclosure that is DIN rail mountabel for easy installation. The Ethernet port allows for easy communication back to the Promess application software running on a standard PC. Multiple PRO modules can also be network to a central data collection point. The PRO Module is powerful yet simple to use making it perfect for monitoring assembly applications such as press-fit, staking, crimping or riveting. On the other hand the system is powerful enough to tackle more demanding test applications where accurate hight speed data collection and advanced analysis are reuqired. Promess provides the complete system including electronics, software, sensors.
Promess will assist in the design and selection of the sensors best suited for your specific application as well as in the initial start-up.
Features
- In-process quality verification
- Part traceability
- 2 high speed 24 bis analog inputs per module
- 1 encoder input per module
- Compact modular design
- Defined database
- Data export funtions
- Fieldbus options
- Auto calibration for sensors
- Diagnostics for setup and trouble shooting
- Network multiple systems
|
|
| ... products without technical information |
| |
INFINITY
Brass push-in fittings and aluminum tubes.
Easiness and quickness of assembling.
Special patented fittings for outlet.
Diameters available: 20, 25, 32, 40, 50, 63 mm
Compatible Fluids: Compressed air, Inert gases and Vacuum
Minimum temperature: -20°C
Maximim temperature 80°C
Minimum pressure: -0.99 bar
Maximum pressure: 15 bar
UV resistant. Fireproof. Anticorrosive coating.
"MOVE THE AIR POWER"
|
|
- Aluminium pipe
- Diameters 16.5 to 100 mm (1/2'' to 4'')
- Quick connection, easy to install
- Efficient flow, no leaks
- 10 years guarantee
|
|
PIPES AND FITTINGS FOR COMPRESSED AIR RINGMAINS
System PVR (PVC alloy) and Concept ALR (aluminium) offer an easy to use, modular system for installing air networks.
|
|
With its the speed series, ENGEL continues its tradition of toggle clamp technology in line with state-of-the-art developments. Systematic re-engineering in conjunction with an efficient hydraulic drive system are the essential basis of this series of high-performance injection moulding machines.
Because:
- Toggle style clamping mechanism: Fast – smooth – robust
- "Wide platen“ option for optimized clamping force even for high cavitation moulds
- Short overall cycle times thanks to fast dry cycle times of 1.2 to 1.7 seconds, fast injection speed (up to 1000 mm / s) and parallel motion
- Machine system geared for high-performance and durability: Stable base frame / modular system components / tried-and-trusted high-performance hydraulics / maintenance-free ultrasonic sensors
- Complete system range with four sizes
|
|
Features
The large-sized Electric Servo Drive Injection Molding Machine of the J-ELIII series have been built based on innovative new features and our proven technology of small and middle size of the J-ELIII series to meet the plastic industry's demand for large sized electric injection molding machine.
- High precision, stable and fast cycle molding.
- High response injection unit with Twin Servo Motors.
- Newly developed original Servo-Amplifier.
- Newly developed Toggle Mechanism.
|
|
| ... products without technical information |
| |
Straight Fitting - Fixed External Thread
Type: A - Adaptaseal
Description : For insertion into threaded entries & knockouts. Locknut supplied with METRIC THREAD ONLY
Material: Polyamide (Nylon) 66
IP Ratings: IP66, IP67, IP68, IP69k
|
|
Flexicon Nylon Straight NPT Thread Fittings
For use with 16 mm Ihru 67 mm Flexicon corrugated conduit/tubing.
Seven NPT threaded choices for use with seven different conduit sizes.
Suitable for use with both fine and/or coarse pitch conduit/tubing.
Unitary design and assembled shipment allows fast fit.
All nylon construction resists saltwater, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing.
No threading of the conduit/tubing is required to install.
Locknuts NOT included, click here for Nylon Locknuts.
Suitable for use by all original equipment manufacturers.
Protection class IP 66 per EN 60529 including high pressure water jet from any angle.
Vibration and tamper resistant but easily removable with use of electricians screw driver.
Click here for NPT thread specifications & IP Rating.
Consult factory for FPAX finings for use in IP 68 or 67 (as well as 66) applications.
|
|
Conduit & Cable Fittings
Thomas & Betts offers one-stop-shopping for electrical conduit and fittings with a portfolio of leading brand names -- Ocal®, Red Dot®, Steel City®, Shureseal, T&B®, Shamrock®. Whether for hazardous location applications, such as an oilrig or refinery, heavy-duty applications such as manufacturing or transportation, or light-duty applications such as hospitals or hotels, you can count on the brands of Thomas & Betts for dependable, quality assurance.
|
|
The muscle behind the motion.
Rugged, robust and reliable, hydraulic motors from Hägglunds can be used just about anywhere on land or at sea. From the bitter cold of Siberia to the blistering heat of Africa, they withstand the challenges of any environment and any type of industry.
Likewise, our motors can drive any application, from small winches to the largest bucket wheel reclaimers. Our broad range of motors covers the whole spectrum of needs, providing either shaft or housing rotation and handling everything from 5000 to 1 400 000 Nm.
|
|
| ... products without technical information |
| |
- Quick and easy installation (even on existing molds).
- Return of the ejector plate is assured.
- Part ejector plate is assured.
- Coupling is obtained in any position, disconnecting is after the ejector plate is fully returned.
- Fast acting up to 30 strokes/minute.
- No wearing parts.
- Can be used on all injection machines equipped with hydraulic or mechanical ejection.
- Set-up time can be greatly reduced.
- Reduce noise on machines with mechanical knockouts.
- Especially suited for injection machines that do not have easy access to the ejector plate.
- Allows for center ejection to be tied in.
|
|
CPI QUICK COUPLINGS FOR MOULD TEMPERATURE CONTROL
Straight-through standard profile CPI quick couplings
- Fast, automatic and reliable. Connect and disconnect with just one hand.
- 2 diameters (8 mm & 12 mm, full flow) offer maximum flow rates in a small body.
- Traight-through design eliminates all risk of scale buildup.
Applications :
- Mould temperature control on thermoplastic injection-moulding machines and zamak or aluminium die casting equipment.
- Cold water, refrigerated water or hot water circuits.
|
|
|
|
see the results for the following category : 
