|
|
PLYMOUTH, Mich., Nov. 01, 2007 - Simrit, a division of Freudenberg-NOK, announced the acquisition of the assets of Precision Industries Corporation of Germantown, Wis., a developer and manufacturer of specialized custom diaphragms. Terms of the agreement were not disclosed.
Precision was established in 1986 as a manufacturer of high quality diaphragms, specializing in fabric-reinforced diaphragms for small engines, fuel systems, irrigation, gaseous fuels, pneumatic controls and medical regulators. In addition, Precision routinely develops custom diaphragms for use in markets requiring certifications such as UL, FDA, NSF, DoD, CSA and a variety of other regulated industries.
Precision's product capabilities include custom diaphragms made of rubber, rubber-fabric combinations and specialty materials, as well as diaphragms and gaskets die-cut from coated fabrics. The company's designs also encompass insert-molded diaphragms and over-molded diaphragms, but their distinction is in assembling specialized diaphragms. Using state-of-the-art equipment, including PLC controlled presses, 3-D modeling systems and robust manufacturing software, they optimize processes to bring customers diaphragm solutions which are both robust and cost-efficient.
|
|
PTFE diaphragms are used in metering devices, the pharmaceutical and food industries, in pumps for the chemical industry and in painting technology. Diaphragms are available made of PTFE, PTFE-elastomer-composites or as multi-layered PTFE-diaphragms.
Highlights
virtually universal chemical resistance
high temperature range between –60°C and +200°C
high service life
Typical Applications
metering pumps
chemical technology
valves
|
|
| ... products without technical information |
| |
EPS cartridges are designed to meet the special needs of the electronics and high purity chemical industries. Polyethersulfone membrane cartridges are resistant to most acids and bases and capable of handling strong sanitization agents. High flow rates make Polyethersulfone a good choice for central DI water systems. This membrane will also handle elevated process temperatures in compatible fluids. To minimize extractables, each cartridge module is pulse, power flushed until the rinse effluent reaches 17+ Megohm-cm and less than 3 ppb TOC. Each cartridge module is also individually tested.
|
|
Polypropylene, and Glass Fiber Filter Elements
Shelco 's MicroVantageTM pleated cartridges are designed to meet the standards of a wide spectrum of industries. From our general grade pleated cartridges designed for high purity applications at an economical cost to our P grade Glass cartridges with a final nonsheding layer of media, these cartridges are manufactured to the most stringent production standards making them the new benchmark of the industry. Materials of construction are specifically chosen to match each application independently. The Shelco MicroVantageTM cartridge should be your choice when critical retention is essential to the process.
|
|
You need cartridge filters with long life, high efficiency and low total operating cost and that's what you get from GE Water and Process Technologies. With an extensive range of filters to meet all of your microfiltration needs:
RO pre-treatment
Pure water filtration
Food and Beverage
Electronics
Oil and gas
Chemical processing
Pharmaceuticals
Medical
General industry
GE provides, and continues to develop, high-performance products backed by years of experience. Our cartridge filters are made with no wetting agents, solvents, anti-static agents, or binders. FDA-compliant filters are available for food and beverage contact.
|
|
BetaPure®
Advantages
* Rigid Self-Supporting Structure
* Free of Media Migration
* Consistent Filtration Characteristics
* Excellent Flow Characteristics
* Broad Chemical Compatibility
* FDA Compliant in Polypropylene/Polyethylene Grades
Cartridge Construction
BetaPure utilizes state of the art fiber technology combined with innovative process technology to provide a clean, rigid filter structure with consistent and reproducible filtration characteristics.
BetaPure is available in two bicomponent fiber systems
1. Polypropylene/Polyethylene
2. Polyester/Copolyester
BetaPure is constructed using long, bicomponent fibers, each fiber having an inner core of polypropylene and an outer sheath of polyethylene, BetaPure performance Engineered "Z" Grades have special integral inserts designed to achieve precise removal characteristics and optimize flow and service life. The bicomponent fibers can be thermally bonded because of the difference in melt temperatures between the two components. Heating the matrix to the melt temperature of the polyethylene sheath, but below that of the polypropylene core, causes the fiber to fiber bond at each contact point, without fiber shrinkage or polypropylene degradation. The high degree of fiber to fiber bonding eliminates the need for a core support and any possibility of media migration.
Polyester BetaPure is constructed by using long bicomponent fibers of polyester and copolyester. This fiber matrix has wide solvent and chemical compatibility and is suitable for many high temperature applications.
|
|
The production characteristics can vary from one membrane to another.
They are given as in indication and correspond to use at 25°C at the pressure indicated above.
|
|
PiP housings and PiP elements are used for process filtration. It is about a brand-new developed series of filters. It includes pleated cartridge filter elements and bag replacement elements for process filtration as for instance filtration of cleaning liquid, lacquers, colors. Originally, pleated cartridge filter elements were developed for the filtration of cleaning liquids, nevertheless they are applicable in a wide range of areas.
|
|
Vokes' Microfelt cartridges are designed for the fine filtration of fuel and lubricating oils, along with other fluids including hydraulic oils and glycol. Manufactured from a range of specially selected synthetic felt media, Vokes Microfelt cartridges have excellent depth filtration characteristics and a high dirt holding capacity. Cartridge integrity and filtration performance relies on design features which include welded media seams, filter media bonded to the end caps and the fitting of leak proof seals. Manufactured to high quality control standards, all filter media is batch tested for filtration performance and metal components deburred.
Vokes Microfelt cartridges are available in 10 standard sizes and can be used in multiple cartridge vessels with flow rates typically up to 300m³/h in lubricating oil systems. There are four basic specifications including cartridges capable of withstanding high collapse pressures, high temperatures and chemically aggressive contaminants. Vokes Microfelt cartridges are disposable, ensuring that all collected contaminants are removed from the system when the cartridges are renewed.
|
|
The filter elements, including sintered metal powder filters, sintered metal fiber filters, titanium filters and other alloyed filters, are manufactured by isostatic pressing or co-axial pressing via powder metallurgy process. Available materials are: stainless steel 316L, 304L, 904, Titanium, Inconel, Hastelloy, Nickel, Monel and other alloys .etc.on request.
The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It has the type of tube, disc and stack of lamination and so on.
Main Applications
1. Gas and liquid filtration
2.Solid catalyst recovery
3.Filtration of slurry oil and other petrochemical products
4.High-temperature gas filtration
5.Fluidization
6.Powder conveying
7.Aeration, and other applications in various industrial fields.
Main advantages
1. Good shape stability
2. High mechanical strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes, can be put together by soldering or gluing
7. The service life can be prolonged by cleaning and regenerating process
|
|
The filter elements are manufactured by isostatic pressing or co-axial pressing. The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It includes the type of tube, disc and stack of lamination and so on.
Main advantages
1. Good shape stability
2. High strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes
7.Highly mechanical strength, can diffusing air homogeneously.
|
|
The filter elements are manufactured by isostatic pressing or co-axial pressing. The pore size can be adjusted by suitable selection of the powder size fraction and the process parameters. It includes the type of tube, disc and stack of lamination and so on.
Main advantages
1. Good shape stability
2. High strengthen and good integrity
3. Controllable pore sizes and porosity
4. Good permeability
5. Good corrosion and thermal resistance
6. Easy to be made into complicated shapes
7.Highly mechanical strength, can diffusing air homogeneously.
Applications
1. Gas and liquid filtration
2.Solid catalyst recovery
3.Filtration of slurry oil and other petrochemical products
4.High-temperature gas filtration
5.Fluidization
6.Powder conveying
7.Aeration, and other applications in various industrial fields.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category
