|
|
|
Kemtron offers a wide range of products designed for all areas of sealing. We are able to offer materials that have wide temperature ratings, long operational life, IP sealing, resistance to fluids and NBC chemicals, UL94 listings for fire retardancy, low toxicity products etc, many available from stock.
|
|
Trelleborg Glazing strip is designed for factory glazing
in machined grooves. The glazing strip is fitted with a
cord that makes it particularly suitable for mechanical
fitting, since the cord prevents the strip from stretching
in its longitudinal direction.
Manufactured from solid black EPDM rubber. For
use in accordance with MTK fitting instructions.
|
|
James Walker manufactures and supplies complete ranges of metallic and semi-metallic joints, gaskets and sheet jointings to suit every industrial application.
In addition, we produce precision-cut flat gaskets to any shape, size and quantity from any sheet material, including our own extensive ranges of jointings. A vast stock of flange gaskets is held ready for immediate despatch, and we can economically cut non-standard profiles of any complexity within minutes.
|
|
BLUE-GARD®
Gasketing material made from a unique blend of fibers, fillers, and a choice of several elastomeric binders. Excels in a wide range of industrial applications.
GRAPH-LOCK®
Pure exfoliated graphite material handles extreme temperatures, resists nearly all non-oxidizing chemicals, and offers excellent compressibility and low creep relaxation. Available in homogeneous material, or with metallic or non-metallic inserts.
GYLON®
Restructured PTFE gasketing with excellent chemical resistance. Significantly reduces creep relaxation problems typical of conventional PTFE.
Inorganic Fiber
Inorganic fiber gasketing with excellent thermal stability and torque retention for optimal sealability in temperatures up to 550°F (290°C) continuous.
LEAK-GARD™
Proprietary compound virtually eliminates oil and hydrocarbon leaks even under low bolt load, and avoids "weep-through" common to vegetable fiber gasketing. Recommended for lightweight gear box covers and fuel pumps, as well as standard ASME raised face flanges.
MULTI-SWELL™
Over 70% of gasket failures are due to lack of load. MULTI-SWELL™ Style 3760 Gaskets react with water or oil to create its own load. Problems with low load applications and leakage are a thing of the past.
|
|
|
Cord Stock, Sheets & Slabs: Sheets and slabs of Parofluor™ and Parofluor™ ULTRA™ can be molded up to 0.275 inches thick and up to 12 inches square.
|
|
| ... products without technical information |
| |
VORTEX® QUANTUM SERIES 2-WAY WYE LINE DIVERTER
The patent pending Vortex® Quantum Series Wye Line Diverter is specifically engineered to handle dry bulk solids in vacuum or dilute phase pneumatic conveying systems with pressures up to 15 psig (1 barg). 3-way, 4-way, and Multi-Port models available.
A full flow orifice provides unrestricted conveying of material with no disk or ledges to impede flow. The diverter seat and live-loaded seals are shielded from abrasion by a metal insert, which provides superior shearing action.
The Wye Line Diverter is designed to eliminate problems, enabling you to meet your objectives by increasing production, while decreasing labour and equipment costs.
Valve Specifications:
- Size/Bore Options: 50mm to 125mm Diameters Pipe, 50mm to 150mm Tube. Consult Factory for 150mm to 300mm Pipe, 200mm to 300mm Tube Models
- Media: Powder, Pellets, Granulars
- Connection Options: ANSI, DIN, JIS, or Compression Couplings
- Media Temperature: Up to 82°C continuous to 121°C intermittent service, Modifications up to 204°C continuous to 232°C intermittent service
- Media Pressure: -0.1 MPa +0.1 MPa, 1 barg, 15 psig, depending on size
- Metal Construction Options: 304 or 316L Stainless Steel, Aluminium, and/or Carbon Steel
- Seal/Seat Material Options: Nylon, PET, UHMW, Glass Filled Teflon, Natural Rubber, and/or Silicon Rubber
- Drive/Actuation Options: Double Acting Air Cylinder, Electric Actuator, Handwheel, or Chainwheel
- Position Detection: Magnetic Reed Switch, Proximity Switch
- Compliance/Approvals: CE, ATEX, FDA
- Industry Use: Plastics, Petrochemicals, Chemicals, Foods, Minerals, Textiles, Agriculture
|
|
VORTEX® 2-WAY SEAL TITE DIVERTER
The Vortex® 2-Way Seal Tite Diverter is designed for use in gravity flow applications where material can be diverter from one source to either of two destinations. 3-way model available.
The Seal Tite Diverter offers a removable access door for replacement of blade and shaft seals. All internal ledges have been eliminated to promote cleanliness. The Seal Tite Diverter’s superior design promotes efficiency, durability, and long service life.
Valve Specifications
- Size/Bore Options: 100mm to 750mm Diameter Round, Square, or Rectangular
- Media: Powder, Pellets, Granulars
- Connection Options: SVC Standard Flange, ANSI, DIN, JIS, or Custom Flanges
- Media Temperature: Up to 82°C continuous to 121°C intermittent service, Modifications up to 204°C continuous to 232°C intermittent service
- Media Pressure: 0 barg, Gravity Flow Only
- Metal Construction Options: 304 or 316L Stainless Steel, and Carbon Steel
- Seal/Seat Material Options: Nylon, PET, UHMW, Glass Filled Teflon, Natural Rubber, Kryptane, and/or Silicon Rubber
- Drive/Actuation Options: Double Acting Air Cylinder, Electric Actuator, or Hand Lever
- Position Confirmation: Magnetic Reed Switch, Proximity Switch, or Mechanical Switch
- Compliance/Approvals: CE, ATEX, FDA
- Industry Use: Plastics, Petrochem, Chemicals, Foods, Minerals, Textiles, Agriculture
|
|
Whatever you want from a Bulk Materials cut-off valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’
|
|
TECHNICAL DATAS
Ball bearing axle
Inspection cap : galvanised steel
Flap that can be dismantled-high resistance dynamic gasket for Airtightness with permanent pressure
Standard finish : one-coat paint
|
|
TECHNICAL DATAS
Ball bearing axle
Inspection cap : galvanised steel
Flap that can be dismantled-high resistance dynamic gasket for Airtightness with permanent pressure
Standard finish : one-coat paint
|
|
All two-way-valves,
two-way-valves with inlet collar, two-way-valves with seal, two-way distributors 60° and two-way distributors 45°, are available in symmetric as well as in asymmetric form.
Symmetrical versions are optimized for an installation in vertical bulk goods lines, asymmetric ones for lines that have an inclination that corresponds to the angle between the outlets.
The pictures below only show the symmetric form.
|
|
|
Diversity of 2-way-distributors with and without seal at the inner flap. 2-way valves, pressed version up to diameter 300 mm with an optional fitting of the inner flap. No reduction of cross-sectional area by convex shape. This ensures less wear and tear of the 2-way valve and of the conveyed product.
|
|
- Moulding press for composite parts for
the aircraft industry.
- Moulding press for carbon parts.
- Moulding press for PU-injection.
- Moulding press with
4 daylight performance.
|
|
Processing parameters with operational temperatures in excess of 600 degrees C and pressures of 68 Bar are available where processes require it. With heating options include electric, oil, steam or Aeroform’s patented, award winning gas fired Radiant Tube Heating Technology that offers energy cost savings of up to 70% over other forms of heating.
|
|
The apparition of new materials such as rubber, carbon fiber and their combination with special polymers and plastics, and the subsequent industrial treatments, has caused a revolution in industry.
Special curing treatment done in OLMAR autoclaves, makes possible the consolidation of these components, obtaining small pieces for the automobile industry, airplane parts for the aircraft industry, parts and components used in sports, large rubber rolls,...
All these is possible, when air is heated in the interior either by resistances or steam with the help of an interchanger. In other cases the curing process is done by using direct steam on the product. OLMAR autoclaves are able to develop both processes.
|
|
Internal dimensions :
Ø=1000 mm x L=1600 mm
Working temperature : 200°C
Working pressure : 10 bars
Control system :
By specific software and supervisor
|
|
Internal dimensions :
Ø=1500 mm x L=3000 mm
Working temperature : 250°C
Working pressure : 10 bars
Control system :
Regulation by industrial programmable controller and supervisor
|
|
Pressing composite materials, particularly reinforced polyester, SMC or GMT calls for critical parallelism accuracies and pressure, time and stroke control. With this in mind, ONAPRES has developed specific installations fitted with the most advanced hydraulic and electronic developments.
ONAPRES uses its extensive experience to provide you with thedifferent solutions which fit each situation best, including tool changing systems, ejection systems, connections for mould operation, part painting (IMC), control of parallelism, etc.
|
|
The automated lines for sheet metal and rod manipulation, respecting the differences according to the load type and size being handled, consist of the following:
-Decoilers: The decoiler represents the first stage in the process and its mission is to coil / uncoil the reel of sheet metal or other material used and supply it to the press, either directly or by means of a feeder, a feeder-levelling machine.
The decoilers are programmed so they coil or unwind by means of the time control loop (connection and disconnection) and with clockwise or counter-clockwise rotation.
|
|
The mechanical handling system on Model SBE 15.SF enables one operator alone to swiftly and saftely transfer coils from the stotage position onto the decoiler without having to use lifting equipment.
A drive is provided so that the strip is decoiled without being strained.
|
|
The printed products from a web press could be delivered as forms or sheets, as folded in various sizes or could also be rewound into a new roll, often called continuous (non-stop) roll-to-roll production.
MEGTEC supplies automatic rewinders for the printing and converting industries. The product line is comprised of small machines with web widths in the range of 14 inches (350 mm) up to large rewinders made for widths well over 40 inches (1000 mm). Depending on the model, the web speed could be up to 2,450 fpm (750 m/min).
All rewinders are specially designed to produce high quality rolls in a variety of materials producing rolls that are consistently firm right from the core. The perfect rolls produced in a MEGTEC rewinder increase your company's productivity and profitability.
|
|
| ... products without technical information |
| |
Hitachi offers wide variety of application products and attachments with proven controllability and versatility to suit varied job requirements. For small and medium sized hydraulic excavators. Make a selection of the right product for the right use to increase job efficiency and productivity.
|
|
REHANDLING GRAB WITH TURNING CLAMP FOR SINGLE CABLE TOWER CRANE
Progressive opening and closing
Advantages:
- Efficiency
- Productivity
- Robustness
- Smoothness
- Simplicity
- Quality
The SECATOL re-handling grab reunites all those advantages to enable a crane operator to work alone.
This Patented product has been especially studied to lift and carry all type of material: earth, rubbish, sand, aggregates..
|
|
Rehandling grabs:
- Twin vertical cylinders clamshell grab designed for any kind of material.
- Optional side and front bolt on cutting edges to reduce the wearing.
- 3 Optional teeth for digging applications.
|
|
|
The PALFINGER Digging Bucket changes your crane into a multifunctional tool. They feature low overall height thanks to horizontally fitted hydraulic cylinders. A sturdy design with low dead weight. The wide-opening buckets have outstanding digging capacity and large volumes. The working edges are vertical when the buckets are open, allowing them to plunge deep into a pile of material.
|
|
|
|