Steel washers

Internal diameter: 7.8 mm - 358 mm
External diameter: 9.8 mm - 398 mm
Thickness: 0.15 mm - 2 mm

... range CN is designed for medium bearing internal clearance. Borrelly Ondulée range CN are available in both carbon and stainless steel.

Internal diameter: 0.28 in - 1.06 in
External diameter: 0.75 in - 2.5 in
Thickness: 0.14 in - 0.25 in

... USS standards. This provides a washer that is up to 36% larger than standard hardened washers. USAE Washers are also up to 37% thicker than standard hardened washers ...

Internal diameter: 10 mm - 100 mm
External diameter: 21 mm - 142 mm
Thickness: 3 mm - 12 mm

Lockwashers DIN 5406 for Locknuts DIN 981, Stainless Steel Material: Stainless steel 1.4301 (AISI 304). Safety plates for locknuts DIN 981. A keyway is required on the shaft thread

Internal diameter: 0.53 in - 3.06 in
External diameter: 1 in - 4.5 in
Thickness: 0.031 in - 0.094 in

Phenolic-backed FIBERGLIDE® thrust bearings provide high load capacity and low friction for use where the elimination of lubrication is desirable. Typical applications include industrial valves and valve actuators, vehicle kingpin assemblies ...

Internal diameter: 9 mm - 24.5 mm
External diameter: 35 mm - 139 mm
Thickness: 2.5 mm - 10 mm

Top and bottom Limits maximum movement Shock loading Overload and rebound washers (top and bottom) are necessary to limit maximum movement in the event of shock loading.

Internal diameter: 3 mm - 55 mm
External diameter: 24, 30, 42, 78 mm
Thickness: 1 mm

High grade, miniature thrust washers and standard washers in Chrome Steel 52100 and Stainless Steel 400c. Boca Bearings can supply thrust washers capable ...

Internal diameter: 2.1 mm - 36.5 mm
External diameter: 4.4 mm - 58.2 mm
Thickness: 0.5 mm - 6 mm

DIN 127 Spring lock washers type B (plain pattern) 1.4310 | A4

Internal diameter: 3.02 mm - 170.55 mm
External diameter: 5.85 mm - 199.83 mm
Thickness: 0.1 mm - 1.992 mm

DIN988 Shim rings and supporting rings. Material: Steel Gasket: at least according to DIN 1624 St2 K50

Internal diameter: 10.2 mm - 120.5 mm
External diameter: 30 mm - 60 mm
Thickness: 3 mm - 10 mm

Internal diameter: 0.22 in - 1.03 in
External diameter: 0.437 in - 2 in
Thickness: 0.125, 0.188, 0.156, 0.25, 0.281 in

Thick, heavy-duty washer with both faces held flat and parallel. Available in steel for stud sizes 1/4 to 1" (M6 to M22 in metric), and stainless steel for stud sizes #10 to 3/4" (M5 ...

Internal diameter: 4.5 mm - 252 mm
External diameter: 9.5 mm - 400 mm
Thickness: 0.05 mm - 4 mm

Waved Washer Springs Emmotts have over the years gained an enviable reputation for their manufacturing capabilities for waved washers and are a world leader in the supply to the electric motor industry. ...

Internal diameter: 3.4 mm - 133.4 mm
External diameter: 7 mm - 178 mm
Thickness: 1.8 mm - 9.5 mm

Nord-Lock washers are available in the following material and sizes: Steel washers with zinc flake coating Delta Protekt® (zinc-flake coating), NL3 – NL42 (standard sizes) and NL45 ...

... product requirements: GB: DIN, BS, ANSI, JIS; ISO standards Machinable material: Iron, aluminum, copper, carbon steel, alloy steel, stainless steel, zinc alloy and ...

Case hardened steel with black oxide finish Large OD offers expanded bearing surface

Internal diameter: 1 mm
External diameter: 3.2 mm
Thickness: 0.3 mm

M1 Form A Flat Washer Finish Zinc & Clear Cr3 Old Web Reference W/M1/-/FASTWA Standard DIN 125A ~ISO 7089 ~BS 4320A Material Steel 140 HV Availability Preferred

Product Description M3, M4, M5, M6, M7, Flat Steel Washer/ Gasket Select the same size inner diameter of washer according to the bolt size

Product: Disc spring washers Standard: DIN2093 A-B-C Material: Spring steel We could produce the Disc spring washers according to your drawings or samples.

Internal diameter: 0.38 mm - 1 mm
External diameter: 0.63 in - 2.25 in
Thickness: 0.142 in - 0.375 in

MCW: Washers , Spherical Rod Ends Safety Washers are designed for use in single shear rod end applications. They reduce the chance of a spherical rod end failure and provide an offset from the face of ...

... New Products, Vision Lite Kits QUANTITY: 1 pcs Product Description Our DR347 round vision lite kit is ideal for wood, steel, composite and kalemein door types. This vision lite kit is available in a variety of size: ...

Internal diameter: 6.4 mm - 56 mm
External diameter: 12 mm - 92 mm
Thickness: 2.3 mm - 22 mm

Spherical Washer Key Features Seating washers supplied in pairs, both female and male (concave and convex). Spherical seat washers are to DIN 6319 C/D) Case hardened blackened steel Spherical ...

Internal diameter: 0.27 in - 1.03 in
External diameter: 0.688 in - 2 in
Thickness: 0.188, 0.25 in

Steel washers are made from cold finished steel and then case hardened. Black oxide finish. Stainless steel washers are type 303. All are machined flat ...

Internal diameter: 2.2 mm - 31 mm
External diameter: 5 mm - 70 mm
Thickness: 0.4 mm - 7 mm

... stresses and movements resulting from thermal expansion or contraction. In such instances, tensioning washers replace conventional lock washers. Tensioning washers can be stacked in series ...

Internal diameter: 0.12 in - 0.66 in
External diameter: 0.46 in - 1.59 in
Thickness: 0.017 in - 0.062 in

... as insert between two adjustable pieces to maintain their position after original setting. Ideal for electrical bonding. Steel parts are available plain or with a zinc .00015″ standard finish. Other materials and finishes ...