|
|
Sanyo Denki offers a complete range of stepping systems with 2PH, 3PH and 5PH stepping drivers and motors, and specific technologies such as PB closed loop models, all-in-on stepper units, RS-485 interface stepping drivers and a complete lineup of stepping motors with encoders.
28 mm square size up to 106 mm round stepping motors are available.
|
|
Variable Speed Control Products
Intelligent Velocity Control
IMS has developed a series of compact speed control products which offer system designers the ability to add intelligent velocity control to their systems.
Variable Speed Control Products include:
* OSC-462H
* OSC-805H
These products allow for a simple, cost effective solution in applications requiring variable velocity control.
|
|
|
|
|
|
The SDM series are designed as a line from low to high voltage. They offer many Inputs and Outputs, and have a very powerful integrated PLC programming function.
SDMWx170 - Main Characteristics:
- Power supply: SDMWD170: 24 ÷ 130 Vdc, SDMWA170 24 ÷ 90 Vac.
- Communication PLC or PC through CANbus or RS232/485.
- 4 inputs of 5÷24 Vdc, 1 analog ±10 V input, 4 outputs of 24 Vdc (all opt. isolated)
- Dip-switches for user settings and unit identification in CANbus net.
- 4 digital inputs, 4 outputs (additional)
- 1 analog input and RS232/485 or CANbus link
- Control of position, speed and torque in open or closed loop.
- real time checking of critical working parameters (temperature, voltages, currents).
- Basic system powered through DC voltage bus.
- AC Version provided with AC to DC supply voltage rectifier with EMI filter.
SDMWx180 – main characteristics:
- implemented through a new generation DIGITAL SIGNAL PROCESSOR CONTROLLER.
- Power supply SDMWD180: 24 ÷ 70 Vdc, SDMWA180: 24 ÷ 48 Vac, SDMWT180: 115 Vac or 220 Vac.
- Communication to master unit through CAN or RS232/485, or by 4 inputs of 5÷24Vdc, 3 outputs and 2 inputs of ±10Vdc.
- All interfaces, digital inputs and outputs are optoisolated.
- Dip-switches for user settings and unit identification in a CAN network or multi-drop RS485 network.
- Control of position, speed and torque in open or closed loop.
- Real-time checking of critical working parameters (temperature, voltages, currents).
- AC Version provided with AC to DC supply voltage rectifier with EMI filter.
|
|
Haydon can supply high performance drivers for its entire range of stepper motors and linear actuators.
From simple L/R constant voltage drives to sophisticated chopper drives with micro stepping capabilities, Haydon’s drives simplify product development and power-up any application.
Competitively priced, our new DCM8028 and DCM8055 micro stepping drives are particularly useful in motor applications requiring low noise, low vibration, high speed. They are also suitable for large volume OEM applications up to 70 VDC and 5.5 Amp per phase.
HAYDON drivers can be used in various kinds of machines, such as X-Y tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
|
|
Operating pulse speed: 100Hz - 200kHz
Starting pulse speed: 100Hz - 10kHz
Acceleration: 1ms/kHz - 100ms/kHz
Power supply: 24V DC
4 programs each with max. 99,999 pulses.
DIN rail mount and panel mount type available.
All data settings and operations can be performed by touch keys on the front panel.
|
|
"Pro" series - Stepper motor control as a complete system!
The system:
The "Pro" series stepper motor controller system leads to a fast setup of a complete controller. Thanks to the backplane the wiring effort is minimized. Also the mechanical machining of the rack is reduced to a minimum. The stepper motor power converter (e.g. our HP-Step.pro or compatible converters) are simply pluged into the rack and fixed at the front. The board holder ensure the position of the board. Complete drilled front plates for our power converters are available as an option. The motors are connected with screw clamps on the backside of the backplane. The distribution of the power voltage from the power supply "Netzteil.pro" to the power converters and the distribution of the logic signals is implemented on the backplane.
Just plug in and start!
|
|
Article: Phasecurrent: Voltage: for Step-Motor-Series
ECMD241 0,5 A - 1,25 A 24 V - 40 V HECM21, HECM22, ECM23
ECMD241 1,0 A - 2,5 A 24 V - 40 V HECM21/22, HECM24, SECM24
ECMD243 0,5 A - 3,5 A 24 V - 42 V HECM26, SECM26, HECM24
ECMD275 1,25 A - 5 A 24 V - 80 V HECM26, SECM26, SECM29
ECMD285 1,25 A - 5 A 24 V - 80 V HECM26, SECM26, SECM29
ECMD2810 2,5 A - 10 A 24 V - 80 V HECM26, SECM26, SECM29
ECMD2135 1,25 A - 5 A 70 V - 130 V HECM26, SECM26, SECM29
ECMD21310 2,5 A - 10 A 70 V - 130 V HECM26, SECM26, SECM29
|
|
|
The SD3 is a universally applicable stepper drive. Reference values are typically preset and monitored by a higher level PLC or a Motion Controller. A very compact and high-performance drive system has been created in combination with the VRDM 3 3-phase stepper motors by Schneider Electric Motion.
|
|
DC2-STN:
The DC2-STN Series provide 2 axes of low-cost servo control, and simple indexing for stepper motors. On-board program memory and signal conditioning for all I/O result in an easy-to-use, self-contained motion controller for cost-sensitive applications.
|
|
SIXpack2
Description
6-axis stepper controller/driver 1.4A/48V
The SIXpack 2 is a highly integrated stepper motor controller unit in a small and robust housing. Up to six 2-phase motors can be driven independently or with linear interpolation in any combination. With three interface options and integrated drivers it is easily integrated in all kinds of automatization environment where motion control is desired. The SIXpack can be remote-controlled using a simple command set, which is identical for all inteface options.
An assembled cable for motor and reference switch connectors is available as an accessory (SIXpack-CABLE).
In terms of software and current settings the new SIXpack2 is fully upward-compatible to the old SIXpack and QUADpack.
|
|
|
|
|
|
Features
The EMP400 Series controllers allow easy programming using simple commands. The dual axis model provides coordinated moves via linear interpolation.
Various motion profiles can be achieved by using up to 32 sequence programs. 1 program can be dedicated as a STARTUP program allowing for stand alone operation. The EMP400 series features 8 programmable inputs and 6 programmable outputs. The EMP400 series can be programmed from a computer or ASCII terminal via a standard RS-232C port.
Pulse Oscillation
Various operation commands are provided for positioning operation, return-to-home operation and dual axis linear interpolation functions. The operator only needs to set the parameters.
Sequence Function
A series of operation patterns can be programmed using dedicated commands. This is an ideal function for distributed system control.
I/O Control
General-purpose I/O signals are provided in addition to dedicated I/Os such as pulse output and limit-sensor input. Synchronization with peripherals is also possible.
|
|
Drives catch the signal of a driver unit faster than a traditional power stage. Accordingly, they receive no tact or direction signals, but rather "higher quality commands" such as: Absolute position "goes to zero". Such commands can be stored and called up again by a control unit for example. The direct retrieval of commands over a PC or over an interface on the device is also possible.
Stepper Motor Drive with Power Supply Unit: GSP
High efficiency power stage and axis controller for 2-phase stepper motors
Power supply unit for direct connection to 230 VAC or 115 VAC
GSP 92-70: up to 9 APEAK / 70 V
GSP 172-140: up to 17 APEAK / 140 V
Processor controlled step resolution selection
Dynamically optimised switching from 1/8 step to full step
Digital I/O for direct connection e. g. to a PLC
Optional: CAN bus, SFI step failure indication
Design acc. to EMC standards and Low Voltage Directions
Control by PC or PLC
|
|
|
SONCEBOZ step motor controls stand out because of their high-performance characteristics, finest microstepping, user friendliness and robust nature in operation. Designed as a bipolar chopper amplifier in Euroformat, they are optimised for the whole range of SONCEBOZ step motors and so are the appropriate amplifier family. The wide performance range of 12..42V/2x2.5A up to 20..120V/2x10A, the programmable step angle, the easy-to-handle current selection with boost-option and the excellent degree of electromagnetic compatibility leave nothing to be desired as to comfort, dynamism and safety.
|
|
|
|
|
|
The Motion Coordinator Euro209 is a 3U Eurocard stepper/servo positioner with the built-in ability to control up to 8 servo or stepper motors in any combination. In addition a single Trio Daughter Board may be fitted to allow the control of an additional axis, communications channel or a digital drive interface allowing up to 16 axes. User programs are written in Trio’s established Multi-Tasking BASIC and applications can be developed using the Windows based MotionPerfect environment. Complex motion profiles are easily programmed and these can be linked to a master encoder input for slaving, gearing and cams.
The ethernet port is controlled by a dedicated Coldfire® communications co-processor allowing fast reliable data communication between the Euro 209 and PC and gives the ability to program multiple cards over an Ethernet LAN. The Euro209 has one RS-232 port and one RS-485 built in that may be configured to run the MODBUS protocol for PLC or HMI interfacing. If the built-in CAN channel is not used for connecting I/O modules, it may optionally be used for CAN communications or as a DeviceNet Slave. USB and Profibus daughter boards may be fitted to provide additional communications options. The Euro209 features a total of 16 axes in software. Any axes not having a hardware interface can be used as a “virtual” axis.
|
|
The R256 is a compact step motor driver and controller which is designed as a stand-alone option to the integrated motor/controller. This product offers the user the option to daisy-chain up to 16 of these units to meet multi-axis application demand. In addition, the R256 offers the user the ability to query various existing parameters such as the microstepping resolution, current position as well as the various speed settings. Visit www.LinEngineering.com today!
Features:
2.0 Amp Chopper (PWM) Driver with Controls
Operates from 12 to 40 VDC
Microstep resolution from ½ to 256 microsteps
Two digital I/O's and two fixed inputs
Stand alone operation with no PC
Single 4 wire bus linking up to 16 units
Fully programmable speeds, current, and acceleration
Stores up to 16 different programs (4kbytes of memory)
|
|
|
|
|
|
AB425S: universal control unit machine drives for 1 servo motor and 2 stepping motors
- Control unit for Efka DC1500 or DC1550 motor
- and 2 stepping motors Efka SM200 and SM 250
- or 3. party products up to 60V and 5A phase current
- User customized programming of individual and even complex functional sequences in a higher programming language for specially designed sewing workplaces and sewing automats using Efka C200 compiler
- Synchronous operation of all drives
- X/Y function
- USB port for data storage uploading and downloading
- Updates via USB with email possible
- Flash technology, no EPROM
- Digital parameter setting directly on the control unit
- Programmable light barrier functions
- Integrated tread monitor function
- A range of HMI: Variocontrol V850 und VarioTouch V900
- 29 short-circuit proof outputs
- 28 digital inputs freely programmable
- 2 analog inputs
- 2 digital / analog converter output (0-10V)
- Operating hours counter
- Machine operating time monitoring with optical or acoustic signal for maintenance
- Expandable to other Efka drives via CANefka
|
|
|
Hurst offers driver system components for 4-phase, unipolar stepping motors in several different configurations
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
