|
|
WRAPPING MACHINE TOSA 125E
AUTOMATIC PALLET STRETCH WRAPPING MACHINE WITH ROTATING RING
EQUIPPED WITH WATERTIGHT TOP SHEET DISPENSER
This machine, with rotating film-roll, allows to obtain a steady and compact packing of all sorts of palletized load by a differentiated wrapping on products of sundry nature. An overall packing (five sides) is guaranteed for all sorts of palletized products by the waterproof top sheet dispenser integrated in the machine. Such a wrapping provides an excellent protection against the action of the weather. The possibility of carrying out different wrapping cycles is the main feature of this machine. The wrapping program, in addition to the complete cycle, allows to carry out a downward cycle only, an upward cycle only, a wrapping of the top or the bottom of the pallet only and a waterproof cycle. This machine can be installed on any existing packing line and it perfectly meets high production needs. It is complete with top pneumatic presser, powered pre-stretch assembly, film hooking and cutting unit, film sealing unit, boundary safety-guards, control board with PLC and different adjusting and control units. |
|
Octopus 303 Automatic :
- Wraps up to 60 loads per hour
- Heavy duty construction
- Pre-stretches film up to 300%
- Rotary ring design increases film savings
- Installs over existing conveyor or can beprovided with conveyor
- Allen-Bradley PLC control
- Octo-Thread carriage allowseasy film threading |
|
Octopus 808 Automatic
- Wraps up to 120 loads per hour
- Heavy duty construction
- Pre-stretches film up to 300%
- Cut and heat seal design increases film savings
- Installs over existing conveyor or can be provided with conveyor
- Allen-Bradley PLC
- Banding and split wrap capabilities
- Optional Pak-Air carriage for load ventilation requirements
- Octo-Thread carriage allows easy film threading
- Strain gauge film delivery control
- Optional integral top sheet dispenser |
|
The Mancon 1710-2265 with its fabricated steel construction frame is designed for high speed stretchwrapping with a low maintenance in continuous end of line production environments. The machines technology will easily and effectively wrap pallets with palletised goods on them (usually presented inside the machine by conveyors), secured enough for transportation.
The machine is fitted with an easy film loading Power Pre-stretch Film Carriage for film savings due to cost effective wrapping and pallet stability programs. The machine can automatically apply mid cycle top sheet for dust or water protection.
Advance controls on the machine enable simple and reliable operational view of the stretchwrapping sequences and fault finding. The pallet remains stationary whilst the high speed (40rpm) graphite rotation ring (patent) with Film Carriage circles, and moves up and down applying film to the pallet. Infrared welding (patent) and cutting of the film at cycle end ensure complete secure encapsulation. The Mancon 1710-2265 is CE marked for safety and performance. Full service and spares support. |
|
The H2000 is REO PACKs ‘ring’ stretchwrapper , a rotating ring and film carriage is lowered over the pallet.
- Capacity over 90 pallets/hour
- Flexible wrapping patterns
- ISS ( Integrated Seaming System ) film cut off and welding without product contact
- All wrap parameters can change with each wrap program
The H2000 is equipped with a state of the art control system which ensures optimal wrapping performance. The ring wrapper is the most versatile type of stretchwrapper, options include:
- Adjustable start and stop position
- Banding of pallets
- Single and cross wrap programs
- Double pallets can be wrapped individually
- ISS ( Integrated Seaming System ) eliminates film tails
- Double motorised power pre-stretch system for optimum film economy |
|
| ... products without technical information |
| |
| Our Atlantic Fluidics axial flow liquid ring vacuum pumps are highly efficient and rugged. Their "abuser-friendly" shrouded rotor design allows starting even in a flooded state without fear of damage. Single and multistage pumps are available, capable of achieving ultimate pressures of 4 Torr (5.3 mbar). Close coupled and separate drive configurations are available. |
|
Key Facts for the NASH Liquid Ring Vacuum Pumps:
· Vacuum pumps from 20 CFM to 23,000 CFM
· Vacuum pumps to 29+ " HgV
· Vacuum pumps designed to operate safely, cleanly and continuously in wet environments.
· Require minimal care - known for extremely low maintenance.
· Provide years of dependable service and quality liquid ring vacuum pumps due to fewer, generously proportioned parts.
· Reduce power and operating costs of liquid ring vacuum pumps, handling higher capacities with less energy/power.
· NASH is the inventor of the liquid ring principle of operation
|
|
Technical data:
Capacity up to 1000(m3/h)
Vacuum up to 730 (mmHg)
Design:
Liquid ring vacuum pumps CEL (single stage) and CEH (two-double) are rotary pumps, with star type impeller eccentrically placed in the cylindrical body.
The principle of operation is based upon the rotation of the impeller eccentrically placed in the cylindrical body, so that the auxiliary liquid forms “water ring”. During the rotation, a part of the water ring enters and emerges among the blades of the impeller so discharging (sucking part) of the operating gas (air), forms appropriate vacuum. The direction of rotation is signed with an arrow on the pump itself.
Except the impeller, the pump has no other movable parts, so that there is no need of any additional lubrication (except bearings) and the sealing between the impeller and the side plates is realizes with the auxiliary liquid.
The water ring also absorbs the whole water vapor that enters with the working gas, thus absorbing the impurities and taking off the heat of the gas.
The service liquid is usually water with optimal working temperature of +150C (max. 450C).
CEL - single-stage pumps with maximum vacuum of 610 (mmHg) can be used in
CEH – double-stage pumps with maximum vacuum of 735 (mmHg)
Applications:
- Paper and cellulose industry,
- Milking sets
- Absorption of vapors in ironing units
- Filter purification
- Humidity absorption of the fabric in textile industry,
- formation and maintenance of the vacuum in the vacuum plants,
- in chemical and pharmaceutical industry,
- in food industry,
- desalination plants,
- in impregnating equipment,
|
|
The comprehensive Sterling SIHI range of liquid ring vacuum pumps is available in single and two stage designs, with suction capacities up to 12000 m3/h and suction pressures in the range 33 to 1013 mbar. In addition, above atmospheric pressure these pumps can be used as compressors.
SIHI FULL RANGE PERFORMANCE
Capacity - 12,000 m3/h
Suction pressures - 33 to 1013 mbar
The latest addition to this is the SIHI LPH-X range, which is available in one and two stage variants and able to operate at 50Hz and 60Hz.
It has been designed for interchangeability with the well established LPHA range and offers the lowest cost of ownership.
SIHI LPH-X PERFORMANCE
Single stage:- Suction pressures - 120 to 1013 mbar
Suction volume flow - 50 to 850 m3/h
Two stage:- Suction pressures - 33 to 1013 mbar
Suction volume flow - 44 to 800 m3/h
FEATURES
• Interchangeable with previous LPH range
• Complies with ATEX legislation
• Single and two stage
• Modular construction
• Compact design
• Fewer components
• Extensive range of sizes, materials and
sealing combinations
• Seal accessibility
• Engineered systems
|
|
| KINNEY KLRC liquid ring vacuum pumps are ideally suited for pumping wet mixtures and even slugs of liquid. These rugged vacuum pumps are available in various construction materials such as stainless steel, cast iron, and bronze fitted. |
|
| Our Liquid Ring Vacuum Systems are ideal for pumping wet gas mixtures at low pressures. A wide variety of configurations are available, incorporating Kinney or atlantic fluidics liquid ring vacuum pumps. Performance ranges to 560 CFM (950 m³/h) in standard systems, or to 10000 CFM (17000 m³/h) in Engineered Solution Vacuum Systems. |
|
| ... products without technical information |
| |
It consists of Synthetic fiber and polyester resin with PTFE micro-powder additions. It has low frictional coefficient and There is no stick-slip. It is applied into Piston and Rod.
Wear Rings are used as a piston & rod bearing to prevent scratching and eccentricity of the piston by absorbing transverse loads on the rod and they also improve the durability of packings in hydraulic cylinder.
Kamglide wear rings are resistant against abrasion, they have chemical and thermal resistance. And they are protected against transverse loads and dirt. And they are economical with low maintenance cost.
|
|
It is standard material for wear ring. It consists of Fine weave cotton fabric and Phenolic resin. It is applied into Piston.
Wear Rings are used as a piston & rod bearing to prevent scratching and eccentricity of the piston by absorbing transverse loads on the rod and they also improve the durability of packings in hydraulic cylinder.
Kamglide wear rings are resistant against abrasion, they have chemical and thermal resistance. And they are protected against transverse loads and dirt. And they are economical with low maintenance cost.
|
|
| ... products without technical information |
| |
Smalley now offers Snap Rings. Smalley has four series of snap rings available from stock in ½” to 11” diameters, in both carbon and stainless steel.
With recently expanded production capabilities, Smalley can now also manufacture Eaton® / Tinnerman® style Snap Rings. |
|
Spirolox® spiral retaining rings, manufactured exclusively by Smalley, have No Ears To InterfereTM with the mating components in an assembly. Spirals can be interchanged with standard snap ring grooves and offer a 360° retaining surface. Spiral Retaining Rings can be easily assembled and removed without special tools.
Smalley offers 15 different series of Spirolox® spiral retaining rings with over 5,000 rings in stock to select from. Spirals are stocked in both carbon and stainless steel, diameters range from ¼” to 16” (9 mm to 400 mm). Specials can be produced from .200” to 84” (5 mm to 2000 mm). |
|
An Unbeatable Range Off The Shelf
-No Protruding Ears
-Wide choice of imperial and metric standard sizes from ½”/13mm to 11”/300mm
-Available in Stainless Steel
-Specials economically Produced Without Tooling Charges
-Easy to Use
|
|
Spirals are manufactured by coiling the ring from flat wire. This unique process produces a retaining ring that has no protruding lugs or burrs that would interfere in your assembly. The Smalley Ring can be economically produced in carbon steel, stainless steel, coppers, and many other alloys.
TFC offers over 5000 standard spiral rings, which are readily available in both carbon and stainless steel. If you require special designs, take advantage of TFC’s engineers and no-tooling manufacture; a process perfect for large runs, prototypes and midstream design changes. Whatever your application, TFC/Smalley have the cost-effective and innovative design solution. |
|
| ... products without technical information |
| |
... see all the products in the category
Magnets
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category
