|
|
|
|
|
|
WRAPPING MACHINE TOSA 125E
AUTOMATIC PALLET STRETCH WRAPPING MACHINE WITH ROTATING RING
EQUIPPED WITH WATERTIGHT TOP SHEET DISPENSER
This machine, with rotating film-roll, allows to obtain a steady and compact packing of all sorts of palletized load by a differentiated wrapping on products of sundry nature. An overall packing (five sides) is guaranteed for all sorts of palletized products by the waterproof top sheet dispenser integrated in the machine. Such a wrapping provides an excellent protection against the action of the weather. The possibility of carrying out different wrapping cycles is the main feature of this machine. The wrapping program, in addition to the complete cycle, allows to carry out a downward cycle only, an upward cycle only, a wrapping of the top or the bottom of the pallet only and a waterproof cycle. This machine can be installed on any existing packing line and it perfectly meets high production needs. It is complete with top pneumatic presser, powered pre-stretch assembly, film hooking and cutting unit, film sealing unit, boundary safety-guards, control board with PLC and different adjusting and control units.
|
|
Octopus 808 Automatic
- Wraps up to 120 loads per hour
- Heavy duty construction
- Pre-stretches film up to 300%
- Cut and heat seal design increases film savings
- Installs over existing conveyor or can be provided with conveyor
- Allen-Bradley PLC
- Banding and split wrap capabilities
- Optional Pak-Air carriage for load ventilation requirements
- Octo-Thread carriage allows easy film threading
- Strain gauge film delivery control
- Optional integral top sheet dispenser
|
|
Octopus 303 Automatic :
- Wraps up to 60 loads per hour
- Heavy duty construction
- Pre-stretches film up to 300%
- Rotary ring design increases film savings
- Installs over existing conveyor or can beprovided with conveyor
- Allen-Bradley PLC control
- Octo-Thread carriage allowseasy film threading
|
|
SATURN S6 HIGH PRODUCTION
. Automatic Envolvedora of ring for palletized loads.
. Production 60-90 palets/hour.
. Double desbobinador mall pillow.
. System rammer.
. Dispenser from film it leaves superior of the load.
|
|
SATURN S8 DOUBLE PRODUCTION
. Automatic Envolvedora of ring for palletized loads.
. Production 90-150 palets/hour.
. Double desbobinador mall pillow.
. System rammer.
. Dispenser from film it leaves superior of the load.
|
|
The fastest fully automatic rotating ring machine in the world for wrapping palletized loads.
Technical features
- Std. conveyor height from ground 500 mm ± 50
- Max. rotation speed adjustable by frequency changer up to 70 rpm
- Total installed power 8 Kw
- Standard voltage 400 V - 50 Hz - 3 PH.+ N + G
- Electric plant and motors protection degree IP 55
- Pneumatic flow 6 bar
- Acceleration/deceleration ramps adjustable by frequency changer
- Spool carriage upwards/downwards speed adjustable by frequency changer
|
|
The stretch wrapper for high throughput.
Special customer benefit:
- Compact, clearly arranged design
- High machine capacity due to servo drive
- Variable speeds for the rotary movement and ring travel
- Flexible - handles various pallet widths
- Minimal servicing - no open slip rings
- High protection class - IP 54, insensitive to dust and moisture
- Precise, reproducible stretch-wrap parameters with Cyklop-Power-Eco-Stretch up to 300% in 7 stages (patented)
|
|
|
Designed to meet the demands of high-volume operations, the Octopus 202 delivers high speed wrapping and superior film economy while producing secure, attractive pallet loads. The Octopus 202 automatic stretch wrapping system features a patented rotary wrapping ring, which can be programmed to start and stop film application at any height on the load without returning to the starting point. This reduces film costs by up to 50% and generates a virtually unlimited selection of wrapping patterns. This compact machine uses minimal floor space so it fits easily into tight spaces and can mount over existing conveyor or be equipped with its own conveyors. The Octopus 202 wraps up to 50 loads per hour.
|
|
Fully-Automatic Stretch Wrapping Machine with Rotating Ring:
Machine Description:
- Fully automatic stretch wrapping machine with rotating ring
- Capacity up to 110 pallets / hour
Options:
- Roller conveyor
- Top film coating
- Special size 1450 mm x 1450 mm
- Hold-down device
- Film change system
|
|
|
|
|
|
The Mancon 1710-2265 with its fabricated steel construction frame is designed for high speed stretchwrapping with a low maintenance in continuous end of line production environments. The machines technology will easily and effectively wrap pallets with palletised goods on them (usually presented inside the machine by conveyors), secured enough for transportation.
The machine is fitted with an easy film loading Power Pre-stretch Film Carriage for film savings due to cost effective wrapping and pallet stability programs. The machine can automatically apply mid cycle top sheet for dust or water protection.
Advance controls on the machine enable simple and reliable operational view of the stretchwrapping sequences and fault finding. The pallet remains stationary whilst the high speed (40rpm) graphite rotation ring (patent) with Film Carriage circles, and moves up and down applying film to the pallet. Infrared welding (patent) and cutting of the film at cycle end ensure complete secure encapsulation. The Mancon 1710-2265 is CE marked for safety and performance. Full service and spares support.
|
|
|
|
|
|
A wide range of rotating ring stretch wrapping machines to wrap and stabilise loads on pallets with stretch film suitable for all industry sectors.
The Genesis Futura series of pallet stretch wrapping machines operate without sliding electrical contacts and feature the exclusive system that powers the pre-stretch driven rollers using batteries which are charged during machine pauses at pallet infeed and outfeed. This technical and highly innovative solution, in addition to eliminating all the typical problems of sliding contacts, also significantly reduces the overall machine weight and correctly balances the rotating masses.
This results in low electrical energy consumption, reduced maintenance, high reliability and long working life.
Furthermore, construction solutions have been adopted to minimise transport costs and installation time giving economic advantages for the end user.
Futura L max load 1450 x 1450 Maximum output capacity 55 Pallet/h depending on line speed and the total number of revolutions of film required.
|
|
AVR 400
Versatility, speed and hi-technology of the AVE - 400 are key features for the new generation of rotating ring _ wrapping machines.
|
|
AVR 400 TS
Versatility, speed and hi technology of the AVR 400 TS are key features for the new generation of rotating ring wrapping machines.
|
|
| ... products without technical information |
| |
SEB or SEB C Ring / Swivel Eye Bolt
Swivel eye bolt fitted with an automatic position recovery system for optimum orientation in the direction of the sling.
Tightening by Allen key
Permits the hook to move parallel to the supporting face of the ring being drawn at 90°
From M16 to M42 as standard; for loads from 1.6 t to 12.5 t
Other variants of fitting bolts on request
|
|
ACTEK® SHR-Series - Hoist ring
Specials
- 5:1 Safety factor
- 200% proof load tested
- Serial numbers for traceability
- rotates 360° and swivels 180°
- Magnetic partical inspected
- Easy mounting, only one thread or hole is required
- also available as WKA-System for assembling the
tower segments of wind generators. With only six
hoisting units, 100% of your tower segments can be lifted.
|
|
OSR and OSR+C Ring / Outside Swivel ring
Ready to use complement to the OFT and OFT+C
The ring forms an integral part of the ensemble
|
|
|
The original safety-engineered hoist ring. Pivots 180 degrees and swivels 360 degrees simultaneously to allow lifting from any direction. Safety factor = 5:1. Black oxide finish is standard, with cadmium plating available as a special. Swivel Hoist Rings are also available in 300-series stainless steel, with a load rating equal to 50% of the steel version.
|
|
Center-Pull Style Hoist Rings
Popular sized hoist rings (1/2-13 through 1-8) are offered with two or more length bolts. Use the longer lengths with softer parent materials, the shorter lengths with hard materials such as steel.
Full Swivel and Pivot Action
Rated at 5:1 Strength Factor
Material: Alloy Steel
Finish: Black Oxide
Clevis, Bolt, Pins, Base, Washer and Bushing are magnetic particle inspected
Washer: Zinc plated with gold colored conversion coating
200% Proof Tested
Drawings available in FixtureProTM CD and downloadable from the web.
|
|
- Range of movement Pivot 180º Swivel 360º
- Minimum safety factor = 5:1
- Meets military specification number MIL-STD 1365(11) or MIL-STD 209C
- 100% magnetic particle inspected
- Meets OSHA requirements
|
|
Description Safety-eye bolt
Reference 260-12-13
Please select one table row below:
D1 D3 (mm)
M12 13
M16 13
M20 16
M24 18
M30 20
M30 22
M36 22
|
|
| ... products without technical information |
| |
Smalley now offers Snap Rings. Smalley has four series of snap rings available from stock in ½” to 11” diameters, in both carbon and stainless steel.
With recently expanded production capabilities, Smalley can now also manufacture Eaton® / Tinnerman® style Snap Rings.
|
|
Smalley now offers Circlips. Smalley has four series of Circlips available from stock in ½” to 11” diameters, in both carbon and stainless steel.
With recently expanded production capabilities, Smalley can now also manufacture Eaton® / Tinnerman® style Snap Rings.
|
|
Spirolox® spiral retaining rings, manufactured exclusively by Smalley, have No Ears To InterfereTM with the mating components in an assembly. Spirals can be interchanged with standard snap ring grooves and offer a 360° retaining surface. Spiral Retaining Rings can be easily assembled and removed without special tools.
Smalley offers 15 different series of Spirolox® spiral retaining rings with over 5,000 rings in stock to select from. Spirals are stocked in both carbon and stainless steel, diameters range from ¼” to 16” (9 mm to 400 mm). Specials can be produced from .200” to 84” (5 mm to 2000 mm).
|
|
Our more than 36 years’ experience on the market for stainless steel fasteners is brought to bear with particular force in this product segment.
All of the articles with relevance to fastening technology – from the traditional screws and nuts in thousands of individual models, through washers, retaining rings and keys in many versions, right up to bolts, split pins and rivets in just as many variations – can be delivered.
Both the parts standardized in accordance with DIN or ISO and the non-standardized fastening elements (e.g. chipboard screws, mushroom head screws, washers) are available.
Stainless steel remains the material of choice for most of the Lederer customers. Hardly any other material can boast its defining properties, such as corrosion resistance, long lifespan and non-magnetizability. And not least, the optical impression made by a mirror-fi nished stainless steel fastener infl uences the choice of material more often than one would suppose.
|
|
|
Products listed here have been derived from Emmotts' standard spring manufacturing operations but are not so easily categorised. These include: disc springs, plain washers, tab washers, volute and secateur springs, balloon springs and wire shapes.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
