Stud

Diameter: 2 mm - 10 mm

For assembly by screwing with high characteristics (tearing stresses, various loads, etc.) in thin sheet metal. This type of stud gives high-performance attachments. Dimensions: from M2 to M10.

Diameter: 5 mm - 18 mm
Length: 18 mm - 58 mm

The K0007 Hinge Pins are made of tempered steel 1.1181. The surface has a heat-treated, ground and natural finish. They are suitable for use with single cam levers (04290 and 04310), eye bolts (07180) and fork pieces (07620). The appropriate ...

Diameter: 9 mm - 11 mm
Length: 18 mm - 20 mm

PolyGrip® rivet studs are splined multi-range blind rivet studs for improved anti-twist protection in soft materials.

Diameter: 6 mm - 11 mm
Length: 11 mm - 17 mm

... combination of blind rivet nut and screw, blind rivet studs provide an alternative to welding studs or other multi-piece T-slot systems from a technological and financial point of view. Blind rivet studs ...

Length: 12 mm

The KVT-Fastening product portfolio offers solutions for a wide range of challenges and applications for the fastening industry. Our product range includes fastening elements like blind rivets, blind rivet nuts, thread inserts, self-clinching ...

Diameter: 19 mm
Length: 12 mm

The KVT-Fastening product portfolio offers solutions for a wide range of challenges and applications for the fastening industry. Our product range includes fastening elements like blind rivets, blind rivet nuts, thread inserts, self-clinching ...

Diameter: 20 mm
Length: 16 mm

Our product range The KVT-Fastening product portfolio offers solutions for a wide range of challenges and applications for the fastening industry. Our product range includes fastening elements like blind rivets, blind rivet nuts, thread ...

FamilyDeform-Stud Type of product Rivet Studs Hexagonal Shank Receiving material Composites, Copper, Inox, Light Alloy, Steel, Thermoplastic, Thermosetting Plastic Material production Steel Assembly Deformation Coating In ...

FamilyDeform-Stud Type of product Rivet Studs Cylindrical Shank Receiving material Composites, Copper, Inox, Light Alloy, Steel, Thermoplastic, Thermosetting Plastic Material production Stainless Steel Assembly Deformation Coating In ...

Family Deform-Stud Type of product Rivet Studs Cylindrical Shank Receiving material Composites, Copper, Inox, Light Alloy, Steel, Thermoplastic, Thermosetting Plastic Material production Steel Assembly Deformation Coating White ...

Diameter: 12 mm - 24 mm
Length: 125 mm - 210 mm

... thread dimension ranging from 12 mm up to 24 mm. The RG MI is suitable for heavy duty ground anchoring system along with stud S and resin anchor RM.

Diameter: 4 mm - 12 mm
Length: 20 mm - 120 mm

Hexagonal head spindle with 2 nuts. Toggle clamps - Accessories. *** Also available in stainless steel material

Spindle with head covered in neoprene and 2 nuts. Toggle clamps - Accessories ** Also available in stainless steel material **

Head joint spindle and 2 nuts. Toggle clamps - Accessories. ** Also available in stainless steel material **

... folding spring bolt is designed for use with clevises that conforms to DIN 71752 ISO 8140 . The folding spring bolt is manufactured from top quality materials ensuring high tensile strength and reliability. The ...

Whether it is a necessity of locks with head or with no head, with single, double or extra turned channels, with or with no thread, with or with no pin hole, mbo has got the majority of them. The product is made of steel and stainless ...

Length: 9 mm - 57 mm

The company mbo Osswald has bolts that come with or without a thread, with or without a pinhole, with one, two or more turned grooves and bolts with or without a head. It can be made of steel or stainless steel from the stock and comes ...

Diameter: 6 mm - 42 mm

Diameter: 12 mm - 24 mm
Length: 65 mm - 150 mm

Stud bolts with reduced shank Steel 21 CrMo V57 plain

Diameter: 6 mm - 24 mm
Length: 130 mm - 240 mm

BN 292 Weld studs with hex nut Steel 3.6 black ~CSN 021399 Weldable

Diameter: 3 mm - 6 mm
Length: 6 mm - 30 mm

BN 3332 Self-clinching captive studs Steel heat-treated 300-380 HV zinc plated blue

Diameter: 5 mm - 24 mm

STUD - STAINLESS STEEL A2 - DIN 938 INOX A2 - DIN 938 Model : 219661

Diameter: 16 mm
Length: 41 mm

The EH 1644.000 is a threaded bolt manufactured by Halder. It is made from tempered heat-treated seal that has a quality rating of 10.9. Furthermore, this threaded bolt weighs 9 g.

Diameter: 8 mm - 16 mm
Length: 63 mm - 250 mm

The EH 23040 Series, manufactured by Halder, is a stud, DIN 6379 b1 long for T-nuts. It is composed of black and heat treated steel structures.

Diameter: 6 mm - 20 mm
Length: 30 mm - 150 mm

For combination with thrust pads with snap ring DIN 6311 form S, (EH 22560.) and clamping screws DIN 6332. Material Steel, blackened, quality 5.8; thrust point hardened

Diameter: 8 mm - 24 mm
Length: 50 mm - 500 mm

For general set up use. Made from alloy steel with a black oxide finish.For general set up use. Made from alloy steel with a black oxide finish.

To hold two panels together or a trim piece to a panel Not disassemblable

To hold insulation or a trim piece to a panel with welded studs Installed by pushing onto the stud, and then tightening with a straight bladed screwdriver to clamp up Disassemblable by unscrewing ...

Self-clinching studs feature serration beneath their heads; this pushes displaced material into the rivet ring when the fastener is inserted into the metal sheet, thus securing the fastener in place.

All-round laser welding ensures a 100% tight bond between the body and screw that withstands even the toughest of requirements. There are only a very few suppliers who offer these highly specialised and high quality connections, and HONSEL’s ...

... using two different methods if required. Only after surface coating are the body and screw firmly connected into a blind rivet stud.

Diameter: 7 mm - 11 mm

The CLUFIX-STUD™ Insert provides a good solution for applications that involve blind assembly of studs on profiles or thin sheets. The tool enables assembly of several work pieces while still rendering ...

Diameter: 2 mm - 10 mm

The Studfix by Clufix is a self-clinching stud which is designed to crimped to achieve a screw function on metal sheet of any thickness. For this specific tool, it uses presses so as to carry out crimping application. ...

Diameter: 6 mm - 42 mm
Length: 32 mm - 500 mm

Threaded pins (12.9) with hexagon socket rolled thread. Tempered to strength class 12.9 The stud bolts developed by AMF especially for clamping purposes have lengths adapted to the standard dimensions. Application: The ...

Welding studs are a great alternative to screws and to self-clinching fasteners; they can be produced in iron copper, in stainless steel, in aluminum and in brass and they can be welded to any type of metal sheet (iron, ...

... applications. They solve many problems of assembly of thin sheet metals. Rivit offers a comprehensive range of fasteners like studs for through holes, available in stainless steel and carbon steel, for blind holes available ...

... categorized into threaded studs, unthreaded studs, tapped studs, 1 or 2 contact faston, and insulation nails. In threaded studs, available in copper-plated steel, stainless ...

Diameter: 5 mm - 20 mm
Length: 8 mm - 50 mm

Diameter: 4 mm - 10 mm
Length: 4 mm - 16 mm

Diameter: 6 mm - 30 mm

Diameter: 2.5 mm - 8 mm
Length: 6 mm - 38 mm

Self-clinch studs (flush head studs) are fasteners that have a serration under the head. At inserting into the metal sheet it presses the displaced material into the rivet ring to secure the fastener. Advantages: • ...

Diameter: 3 mm - 12 mm
Length: 8 mm - 102 mm

THREADED STUDS WELDING WITH CHAMFERS Type SGF The SGF stud is symmetrical with 2 chamfers and threaded almost to the top of the welding tip. Thus after welding the stud is threaded ...

Diameter: 3 mm - 8 mm

STANDARD NON-THREADED STUD Type US / TCL The US/TCL stud is a non-threaded stud with a flange, Short Cycle Process.

To fasten components to profiles, brakes the anodized coat of the profile - thus ensuring a safe, electrically conductive connection Material Stainless steel SS316 Pack Quantity 100 pieces

Diameter: 4 mm - 16 mm
Length: 25 mm - 175 mm

The 8901 threaded studs, manufactured by WDS, are made from stainless steel BS 970 303S31. These studs are also offered in other series such as the 801 Series which is made from 316 stainless steel and ...

Diameter: 5 mm - 16 mm
Length: 40 mm - 150 mm

Swing Bolt - 316 Stainless Steel - Heavy Duty Type - Stainless Steel Swing Bolts MATERIAL Stainless Steel BS 970 Gr 316S11

Diameter: 6.5 mm - 9.8 mm
Length: 10 mm

BLIND RIVETING SCREW WITH COUNTERSUNK HEAD Countersunk head, galvanised steel, blue passivated (A2K)