|
|
Features:
- Long -life 24 VDC operation
- For 4" wells or larger
- Quick disconnect with "Watertite-Gland" Design Pat Pend
- Corrosion-proof housing with stainless-steel fasteners
- Runs dry without damage
- 50 mesh stainless steel inlet screen
- State of the art solid diaphragm
The solution to your remote water pumping needs. This pump is rugged, durable and built to last. The 9300 delivers a steady 112 GPH (422 LPH) at its maximum depth of 230 feet (70M) when supplied with 24 VDC. Its unique water-tight power connector stops water wicking and prevents potential condensation problems. Great for livestock watering, irrigation, pond areation, remote homes and cabins.
|
|
* Applications:
Power Generation,Pressure Boosting,Sea Water,Subsea Drives,Water Supply,Water Treatment,Deep Well,Dewatering,General Purpose,Geothermal,Irrigation,Mine Dewatering,Municipal,Offshore,Potable Water
* Industries:
Desalination,Ground Water Development and Irrigation,Miscellaneous Services,Snowmaking,Water Handling and Treatment,Water Supply and Distribution,Water Treatment
* Standards:
* Misc:
Oil Filled Motors with self contained force feed, filtered, cooled oil circulation system to maintain continuous lubrication.
Vacuum Pressure Impregnated (VPI) Epoxy, Class F Insulation System for superior insulation and long service life.
Double-Acting Thrust Bearing System for continuous up or down thrust capability.
Heavy-Duty, High Efficiency Impellers are dynamically balanced to minimize vibration and maximize service life.
|
|
Features
* Multistage
* High speed
* Radial flow / mixed flow
* Low power consumption per stage
* Nitrile rubber bushes suitable for voltage fluctuation 200 V to 440 V
Applications
* Agriculture
* Irrigation – conventional and sprinkler
* Booster application
* Water supply schemes for industries
* Construction
* Cooling and air-conditioning installation
|
|
Construction
- Submersible motor pumps for deep wells of 6" (DN 150 mm) and 8" (DN 200 mm), with external jacket and stages in stainless steel AISI 304 or AISI 316.
- Radial impellers 6SDX 13-18-27
- Mixed flow impellers 6SDX 45-60, 8SDX 78-97
- Connection: Screwed connection ISO 228
- Delivery casing with built-in non-return valve.
Applications
- For water supply.
- For civil and industrial applications.
- For fire fighting applications.
- For irrigation.
|
|
Griswold 4”, 6” and 8” Submersible Turbine Pumps are designed for a wide variety of applications . . . farm, home, fountains, irrigation, industry, municipal and commercial use.
Seven Series of 6” pumps with flow rates up to 550 GPM and two series of 8” pumps up to 1000 GPM.
Discharge, Intermediate Bowls and Motor Brackets: Heavy duty class 30 cast iron for maximum efficiency and abrasion resistance. Reliable long life bronze bearing in every stage.
Impeller: Balanced lead free silicon bronze, enclosed impellers designed for maximum efficiencies with a wide range of hydraulic coverage and corrosion resistance.
10”, 12” & 14” Turbine Submersibles are also available, utilizing our vertical turbine bowls and fabricated brackets. Contact our application engineers for more information.
Fabricated assemblies available for in-line booster pumps and other special fabrication requirements.
|
|
Close-coupled submersible pumps
Applications
- Water supply from rain water tanks or reservoirs, 6” wells, basins and watercourses.
- Sprinkler systems.
- Pressure boosting with pump inserted directly in tank or well, to avoid
suction problems and noise.
Specifications
- Delivery: up to 7,5 m3/h.
- Head: up to 80 m.
- Maximum pump overall diameter: 128 mm.
- Maximum immersion depth: 20 m.
- Maximum permissible quantity of suspended sand: 25 g/m3.
- Passage of solids up to 2.5 mm.
- Delivery port: Rp 1”1/4.
- Rated motor power: 0.55 to 1.1 kW.
|
|
|
Multistage submersible water pumps for 6” deep wells (DN 150 mm). Particularly suitable for civil and industrial purposes, for sprinkler and food irrigation plants, in fire intallations and generally speaking for clean water supplying.
|
|
|
The 6 inch canned design motor features a replaceable plug-in motor lead, moisture resistant insulation and a specially formulated patented resin that protects the motor against thermal fluctuation and internal stress. The 8 to 10 inch rewindable water-tight motor has a coil conductor insulation material that is specially developed denatured polypropylene, which offers excellent leak-resistant characteristics. Three barriers are applied to the copper conductors to provide complete insulation against the motor’s cooling fluid. This design is the result of extensive research and is of superior quality. It insures that CentriPro motors will have an extremely long service life.
|
|
SPP submersible pumps are custom engineered for the oil and gas industry. Pumps are of the vertical turbine design and can be provided in either single or multi-stage configuration to suit client's requirements. They are driven by submersible (IP68) motors as an alternative to deck mounted drive units and can be supplied up to 100 meters in overall length.
Typical Applications:
* Main fire pump
* Firewater jockey pump
* Booster pump
* Seawater intake
* Seawater lift
* Cooling water
* Utilities
In pump packages incorporating electro-submersible pumps, the pump and motor are located below sea level in a caisson, while the diesel generator is placed on the platform where space allows. These systems tend to be favoured where platform design or space limitations prevent the use of conventional platform mounted lineshaft pumps.
|
|
APPLICATIONS
* DECANTATION PIT, SEWAGE PIT AND SLURRY COLLECTION PIT PUMP OUT.
* PUMP OUT OF LAVATORY/FOUL WATER WITH POSSIBLE FLOATING
SOLIDS CONTENTS.
* DOMESTIC AND INDUSTRIAL LAVATORY/BLACK WATER HANDLING
DESIGN ENGINEERING
* DOUBLE CHAMBER ELECTRIC PUMP (MECHANICAL SEAL, MOTOR).
* OIL BATH MOTOR (BIODEGRADABLE AND DIELECTRIC) FOR COOLING AND BEARING LUBRICATION.
* SEALING RING - ENGINE FACE.
* OIL BATH MECHANICAL SEALS.
* DOUBLE MECHANICAL SEALS:
ENGINE FACE: OIL BATH
PUMP FACE: WATER BATH
* PERMISSIBLE DRAUGHT OF WATER: 5 m
* IP 68 PROTECTION CLASS
* CLASS “F” INSULATION
* MAX. PUMPED LIQUID TEMPERATURE:
25°C with PARTIALLY submerged pump.
50°C with TOTALLY submerged pump.
|
|
APPLICATIONS
* DECANTATION PIT, SEWAGE PIT AND SLURRY COLLECTION PIT PUMP OUT.
* PUMP OUT OF LAVATORY/FOUL WATER WITH POSSIBLE FLOATING SOLIDS CONTENTS.
* DOMESTIC AND INDUSTRIAL LAVATORY/BLACK WATER HANDLING SYSTEMS.
DESIGN ENGINEERING
* DUAL CHAMBER ELECTRIC PUMP (MECHANICAL SEAL, MOTOR).
* OIL BATH MOTOR (BIODEGRADABLE AND DIELECTRIC) FOR COOLING AND BEARING
LUBRICATION.
* SEALING RING - ENGINE FACE.
* OIL BATH MECHANICAL SEALS.
* PERMISSIBLE DRAUGHT OF WATER: 5 m
* IP 68 PROTECTION CLASS.
* CLASS “F” INSULATION.
* MAX. PUMPED LIQUID TEMPERATURE:
25°C with partially submerged pump.
50°C with totally submerged pump.
* BY PASS SECTION: 30 mm. - TIGER 70
35 mm. - TIGER 80
50 mm. - TIGER 100 - 150
|
|
Description.
We plan and manufacture high quality submersible electro pump, using the best materials available on the market, Such materials are chosen evaluating the characteristics of the fluid: grey lamellar graphite cast iron …INOX AISI 316 Steel, Duplex, Hasteloy and Marine Bronze. Reliability and duration of Faggiolati products are granted by a perfect balance of the shaft and the impeller and by certified vibration and waterproof resistance test under high reliability.
The product range includes electro pumps which runs from 0.5 Kw to 110 Kw with 2-4-6 poles (50 and 60 Hz) Different type of hydraulic are: Single channel – channels – high efficiency vortex type – drainage – grinder.
Uses
The right type of material is chosen taking in consideration the numerous type of hydraulics , it allow the use of our pump, on salty water and different type of treatment plants as: desalination plant, sewage water raising, pumping and draining of aggressive liquids, industrial waste waters
|
|
Gorman-Rupp hydraulic submersible pumps are designed for trash-handling, dewatering applications and for pumping dirty liquids such as mining and paper plant wastes. They are also excellent for pumping sewage from digester and holding tanks as well as sewer bypass. Because they operate without using electricity, they are well suited for applications where electricity is hazardous.
Specifications
Size: 3" (75 mm), 4" (100 mm), 6" (150 mm)
Max Capacity: 1,600 GPM (101 lps)
Max Head: 175' (53 m)
Max Solids: 5" (127 mm)
Max Temperature: 170 F (77 C)
Materials of Construction: Aluminum, Ductile Iron
|
|
FBV Series
Sewage Effluent, Vortex, Non-clog & Cutter Pump
Motor
a.Oil-free motor with thermal and over-current protector.
b.Asynchronous motor 3 phase, 2 pole, 50Hz/2850rpm or
60Hz/3450rpm.
c.Insulation class F=155ßC, Protection Type IP68.
Construction
a.Completely sealed water resistance cable entry.
b.Durable Cast lron casing for superior heat dissipation.
c.Highly wear resistance heat treated 410 stainless steel shaft.
d.Double mechanical seals (lower silicon carbide v silicon carbide,
upper carbon/ceramic) for superior wearing resistance and to ensure
durability.
Pump
a.Rigid ductile iron impeller, abrasion resistant, in various design.
b.Max. liquid temperature: 40ºC (104ºF)
c.Max. submerged depth: 10m (33ft)
d.Cable: 10m (33ft) PVC or HO7RN-F upon request.
e.Guide Rail Fittings are available upon optional request.
|
|
Features
* Non-clog two vane or single vane enclosed impeller
* Permissible solid size up to 85 mm
* Gland packed / Mechanical seal
* 50 HZ / 60 HZ availability
Applications
* Effluents
* Waste water
* Storm water
* Raw sewage
Range
* Delivery size up to 200 mm
* Capacity up to 750 m³ /hr
* Head up to 48 metres
* Temperature (-) 10 degree C to 90 degree C
|
|
The CP 10 and CP 20 submersible pumps are designed with the performance and durability which make them ideal for removing water from trenches, ditches, manholes, industrial sumps and excavations. Will pump down to within 7/8' (22 mm) from base.
* Single-stage centrifugal units driven by powerful vane motors
* Double seals protect bearings and motor from water and mud
* Integral oiler provides continuous lubrication
* Integral strainer, air inlet valve
* Bronze impeller
* Cast-iron housing
|
|
One of the main characteristics of FAGGIOLATI PUMPS is the high flexible production, that allows the realization of customised machines made according to customer’s requirements.
Nearby the standard production – our General Catalogue boasts more than 200 standard products – we realize special machines to meet the particular requirements of customers regarding hydraulic, metallurgy and power supply.
|
|
MultiCut Pumps with external adjustable cutting system
MultiCut submersible pumps are ideally suited for sewage and waste disposal in residential areas, such as housing estates, holiday parks or individual housing projects. These pumps are ideal for mounting in remote situations, such as motorway service stations and rural communities/farms etc.
For sewage and waste disposal in residential areas, such as housing estates, holiday parks or individual housing projects.
- Discharge branch DN 32
- Hmax = 17 m
- Qmax = 16 m3/h
|
|
Submersible Pumps for dirty water
Submersible pumps for dirty water manufactured in AISI 304 stainless steel. Head up to 20 metres, delivery up to 425 l/min (25,2 m3/h). Four basic models with 0.55 (0.75 HP) to 1.5 kW (2HP) rated power. Motor cooled by pumped liquid diffuser plate coated with Polyurethane for maximum resistance to abrasion compact and lightweight
Applications
- Draining of cellars, garages, basements.
- Draining of construction sites.
- Emptying of tanks and reservoirs.
- Lawn and garden irrigation.
- Fountains.
- Pumping of domestic wastewater (washing machines, showers, Sinks).
- Emptying of tanks in industrial and ecological Applications.
Specifications
- Liquid temperature up to 50°C.
- Open impeller.
- Minimum level of pumped liquid: 25 mm.
- Suspended solids handled up to 8 mm.
- Maximum immersion depth: 7m.
- 10 meters of HO7RN-F type neoprene power cord.
- Dry motor (class F insulation).
- IP 68 protection.
|
|
Features and Benefits
Silicon bronze, multi-vane semi-open impeller with pump-out vanes for mechanical seal protection.
Heavy duty cast iron, volute type casing for maximum efficiency.
Dual Mechanical Seals
Optional Seal Sensor Cord located in oil-filled chamber.
Stainless Steel Shaft and Fasteners
Applications
Designed for high head sewage applications where a gravity system is not practical.
Ideal for pressure sewage systems.
|
|
LB Series
Submersible Effluent, Vortex, Non-Clog & Cutter Pump
A very complete series of submersibile pump have been developed to meet your various requirements. In general, you are suggested to use LB series as drainage pump for liquid effluent pumping applications, LBV series as vortex pump for raw sewage applications and LBC series as cutter pump to chop the solids in wastewater.
|
|
|
C.R.I. Submersible Pumps are the products of the expertise from over four decades of experience, endurance and workmanship. These products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service.
|
|
Operating Limits:
-Max. liquid temperature: 35°C
-Min. diameter of well: 100mm
-Max. immersion depth: 100m
-Max. sand content: 0.25%
-Continuous duty
Motor:
-Rewindable enclosed induction motor or full obturated screen motor(n=2850r.p.m.)
-Built-in thermal overload protector with automatic reset
-Insulation Class B/F
-Protection IP68
Pump equipped with start control box or digital auto-control box
Material:
-External pump body: S.S AISI304
-Suction strainer: S.S AISI304
-Impeller: Noryl
-Diffuser: Noryl
-Shaft: S.S AISI304-C1045
-Motor housing: S.S AISI304
-Mechanical seal: Graphite-Sic/hard alloy
-Discharge body: Cast brass ASTM250 or Cast iron G20 UNI5007 or S.S AISI304
Application:
·Multistage submersible water pumps for 4" deep wells.
·Particularly suitable for civil and industrial purposes, such as applications to sprinkler and food plants, fire installations, etc.
·Water supply from wells or reservoirs, for garden use and irrigation.
|
|
Operating Limits:
-Max.liquid temperature:35°C
-Min.well ID: 132mm
-Max.immersion depth: 20m
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Built-in thermal overload protector with automatic reset
-Insulation Class B/F
-Protection IP68
Material:
-External pump body: Stainless Steel
-Suction strainer: Stainless Steel
-Impeller and diffusors: Noryl
-Bearing brackets: Brass
-Shaft: Stainless Steel
-Motor housing: Stainless Steel
-Mechanical seal: Silicon/Silicon
Application:
·Multistage centrifugal submersible pump is applied to clean water drainage, especially widely used in irrigation system, drinking water supply, washing and similar applications where increased pressure is in need.
·It's stainless steel pump body and motor provide rust-resistance.
|
|
Operating Limits:
-Max.liquid temperature:35°C
-Min.well ID: 132mm
-Max.immersion depth: 20m
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Built-in thermal overload protector with automatic reset
-Insulation Class B/F
-Protection IP68
Material:
-External pump body: Stainless Steel
-Suction strainer: Stainless Steel
-Impeller and diffusors: Noryl
-Bearing brackets: Brass
-Shaft: Stainless Steel
-Motor housing: Stainless Steel
-Mechanical seal: Silicon/Silicon
Application:
·Multistage centrifugal submersible pump is applied to clean water drainage, especially widely used in irrigation system, drinking water supply, washing and similar applications where increased pressure is in need.
·It's stainless steel pump body and motor provide rust-resistance.
|
|
Operating Limits:
-Fluid temperature up to 35°C
-Maximum ambient temperature: 40°C
-Maximum immersion depth: 7metres
-Maximum grain size:5mm
Motor:
-Build-in overload motor protector with automatic reset
-Insulation Class B/F
-Protection IP68
Materials:
-Pump body: Glass filled technopolymer
-Impeller: Noryl
-Motor shaft: Hi-Cr plated 45# Steel/Stainless Steel
Application:
·Hand-carry submersible automatic water pumps.
·Able to drain infiltrating water, cellars or reservoirs, clean or slightly dirty water and for garden irrigation.
|
|
|
C.R.I. Submersible Pumps are the products of the expertise from over four decades of experiendce, endurance and workmanship. These products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service.
|
|
Salient Features
* Pump is capable of handling sand laden or brackish or geothermal water with ease.
* Driven through a series of shafts supported by water lubricated rubber bearings, through drive head installed on ground level.
* Can be driven by an electric or Solar Powered Motor or Diesel Engine and provides option for changing pumps speed to match bore well yield.
* Smaller bore diameter reduces drilling costs.
* Flow rates unaffected by change in lavel of water table.
|
|
Nikkiso Cryogenic Pumps, wetted motor type submerged pump, specially suited for cryogenic liquefied gas such as LNG, LPG and LEG.
* Submerged wetted motor configuration eliminates leakage of liquids and make pump construction simple
* Long bearing service life by minimal gearing load design
* Pump test facility with LNG (-162℃) is available
|
|
Application
These pumps are used for water supply, irrigation, dewatering. Turbine pumps are particularly suitable for narrow bore holes. Minimum bore hole sizes range from 200mm to 350mm.
|
|
|
|
