|
|
PUMPS IMMERGEES 4 " to 24 "
BEACHES Of USE
Flows until: 2000 m3/h
Heights mano. until: 600 mCE
APPLICATIONS
Major drillings (until 300m), sumps, tanks, lakes, stoppings or rivers
Drinking water supply
Overpressure, irrigation, watering
Installations of treatment of water
Fire protection organization and sprinkler
Subterranean water folding back
Exploitation of geothermal energy
Platforms at sea...
ADVANTAGES
High hydraulic output and robustness, exceptional mechanics
Anti-corrosion wheels bronzes some without zinc
Great choice of materials: cast iron, spheroid cast iron, bronze without zinc...
Optimization of the characteristics by trimming of wheels
Non-return valve integrated according to model
Silicon carbide mechanical seal of higher quality
Engines available in 4 poles for one important lifespan, voltage until 6.000V
Engine rebobinable, temperature sensors
Horizontal or vertical installation
|
|
|
The pumps are employed for public water applications, water control at construction sites and in mines, and fountains. Our range of submersible pumps handles bore hole sizes from 8” to 12”, capacities up to 580 m3/h and heads up to 450 m.
|
|
LEROY-SOMER offers a huge range of centrifugal electropumps designed
for bore holes: drainage pumps, surface pumps with automatic
priming, submersible pumps.
|
|
SP4",6" and 8" submersible pumps are made of corrosion and abrasion resistant stainless steel and have been developed in accordance with state-of-the-art technology.The SP series of pumps are manufactured to the highest standards for energy efficiency,high performance,rugged construction and long service life for the most demanding applications.
Operating Limits
50Hz
- Capacity : max. 120m3/h
- Head : max. 432m
60Hz
- Capacity max.150 m3/h
- Head : max. 540m
- Liquid temperature : 0ﾟC to+60ﾟ
- Sand content : Max. 50g/ m3
Applications
- Residential Potable water supply from deep wells
- Municipal and industrial waters supply
- Irrigation and other agricultural applications
- Fire fighting systems
- Pressure boosting in high-rise buildings and other applications
|
|
|
C.R.I. Submersible Pumps are the products of the expertise from over four decades of experience, endurance and workmanship. These products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service.
|
|
Operating Limits:
-Max.liquid temperature:35°C
-Min.well ID: 132mm
-Max.immersion depth: 20m
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Built-in thermal overload protector with automatic reset
-Insulation Class B/F
-Protection IP68
Material:
-External pump body: Stainless Steel
-Suction strainer: Stainless Steel
-Impeller and diffusors: Noryl
-Bearing brackets: Brass
-Shaft: Stainless Steel
-Motor housing: Stainless Steel
-Mechanical seal: Silicon/Silicon
Application:
·Multistage centrifugal submersible pump is applied to clean water drainage, especially widely used in irrigation system, drinking water supply, washing and similar applications where increased pressure is in need.
·It's stainless steel pump body and motor provide rust-resistance.
|
|
Operating Limits:
-Max.liquid temperature:35°C
-Min.well ID: 132mm
-Max.immersion depth: 20m
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Built-in thermal overload protector with automatic reset
-Insulation Class B/F
-Protection IP68
Material:
-External pump body: Stainless Steel
-Suction strainer: Stainless Steel
-Impeller and diffusors: Noryl
-Bearing brackets: Brass
-Shaft: Stainless Steel
-Motor housing: Stainless Steel
-Mechanical seal: Silicon/Silicon
Application:
·Multistage centrifugal submersible pump is applied to clean water drainage, especially widely used in irrigation system, drinking water supply, washing and similar applications where increased pressure is in need.
·It's stainless steel pump body and motor provide rust-resistance.
|
|
Operating Limits:
-Max. liquid temperature: 35°C
-Min. diameter of well: 100mm
-Max. immersion depth: 100m
-Max. sand content: 0.25%
-Continuous duty
Motor:
-Rewindable enclosed induction motor or full obturated screen motor(n=2850r.p.m.)
-Built-in thermal overload protector with automatic reset
-Insulation Class B/F
-Protection IP68
Pump equipped with start control box or digital auto-control box
Material:
-External pump body: S.S AISI304
-Suction strainer: S.S AISI304
-Impeller: Noryl
-Diffuser: Noryl
-Shaft: S.S AISI304-C1045
-Motor housing: S.S AISI304
-Mechanical seal: Graphite-Sic/hard alloy
-Discharge body: Cast brass ASTM250 or Cast iron G20 UNI5007 or S.S AISI304
Application:
·Multistage submersible water pumps for 4" deep wells.
·Particularly suitable for civil and industrial purposes, such as applications to sprinkler and food plants, fire installations, etc.
·Water supply from wells or reservoirs, for garden use and irrigation.
|
|
Salient Features
* Pump is capable of handling sand laden or brackish or geothermal water with ease.
* Driven through a series of shafts supported by water lubricated rubber bearings, through drive head installed on ground level.
* Can be driven by an electric or Solar Powered Motor or Diesel Engine and provides option for changing pumps speed to match bore well yield.
* Smaller bore diameter reduces drilling costs.
* Flow rates unaffected by change in lavel of water table.
|
|
| ... products without technical information |
| |
Alignment of bores in diesel engines, compressors, pumps, gearboxes, stern tubes and turbines
Proper repair and reconditioning of combustion engines, compressors and pumps requires exact measurement of the alignment of crankshaft and camshaft bores, cylinder bores and crosshead guides. This is usually accomplished by optical or wire-based methods. CENTRALIGN Ultra is a precision laser alignment system designed to replace those older and more time-consuming technologies. It is much faster, very precise, and provides a clear measurement protocol.
|
|
For straightness measurement of bores and bearing journals, both in production and in the field. Very stable construction for highest measurement accuracy. Measures both open and closed bearing pockets with equal simplicity. Handles up to 150 measurement positions.
Typical applications: Crankshaft and camshaft bearings in diesel engines, bearing journals and hull penetrations in propeller shaft installations, workpiece positioning in machine tools.
|
|
The L-705/L-706 laser systems are highly accurate, easy-to-use bore alignment lasers that can be used for virtually any bore alignment application. Bores ranging from 1.5" (38.1 mm) to 36" (914 mm) or more can easily be accommodated.
The L-705 is used for bore alignments out to 50 feet (15 M) and the L-706 is used from 50 to 110 feet (15 M to 33.5 M). Both lasers feature battery operation and micrometer-controlled angular adjustments, and both lasers are centered to their housings to within .0005" (.013 mm).
Our competitively priced L-705 Laser Borescope system is the fastest and most accurate extruder alignment system on the market. Its patented self-centering target and simple laser fixture are so easy to use you can have misalignment data in less than 10 minutes, including setup!
|
|
SERCO PORTABLE MACHINING UNITS
The SERCO units are positioned and locked by means of a column/arm system clamped on the outer part of the surface to be machined (allowing internal machining). Machine set up is fast and easy. After a first visual positioning, we can get within a few minutes, using a simple specific device, a parallelism and concentricity within a 1/100 of mm precision. A powerful air motor drives the tool rotation (hydraulic motors on request) and radial automatic feed (with a selection of two speeds).
Maintenance
Flanges
Safety valves
Sealing valves
High pressure valves
Portable Equipment
Portable machining equipment
Portable boring and surfacing machines
Portable surfacing machines
Portable grinding machines
Portable lapping machines
For further information please contact :
PROTEM SAS
ZI LES BOSSES
F-26800 ETOILE SUR RHONE
FRANCE
Tel +33 4 75574141
email : n.reicher@protem.fr
|
|
The V-Lap F6 is standard equipped with a range of grinding and centre plates for grinding and lapping any type and size of ‘flat’ seat up to 6” / DN150 mm. The centre plate keeps the grinding plate in position, but also gives an eccentric rotation ensuring constant and complete coverage and absolute flatness.
Abrasives
The V-Lap F6 is completed with a large consumer quantity of polyester based, self-adhesive Aluminum Oxide round foil tips in grains rough, middle and fine. The foil tips can be used dry and on all common seat materials.
Drive machine
The V-Lap F6 is standard equipped with a battery drive machine and is delivered with 2 battery’s. The low weight and good balance of the machine increases the grinding performance and makes it easier to attain high quality flat ‘results’.
The complete set is packed in a robust, but light weight carrying case.
|
|
3 Axis 800 / 2000 / 4000
The machine is equipped with: one control panel, with an auto diagnostic display system, for the rotation and the feed of the arm and the milling cutter.
|
|
| ... products without technical information |
| |
|
Enidine's Large Bore Hydraulic Shock Absorbers offer a wide variety of configurations including bellows, clevis mounts and safety cables. Standard, adjustable or custom-orificed, non-adjustable models are available as well as optional fluids and seal packages to expand operating temperature ranges. Units can be complemented with specialized surfaces and attachment accessories. For easy maintenance, all sizes of Enidine's Large Bore Hydraulic Shock Absorbers are repairable.
|
|
Consolidation of grounds by autoforant anchoring with injection: Micropieux, ties and nails
The process of autoforage ISCHEBECK allows the simultaneous realization of the operations of drilling and injection by its bored edge. This technique thus removes the installation and the extraction of borehole allowing time-savings and the labor tube.
The system of anchoring autoforant ISCHEBECK makes it possible to carry out all the building sites of confortement and proves to be essential for the difficult grounds as well as the lifting building sites or of limited spaces.
Applications:
Realization of micropieux, ties and nails
Confortement of structure of a building
Confortement of ripe, slope, vault in tunnel
Underpinning of existing foundations
Stabilization of fill, rock faces
Consolidation of the electric foundations of pylons...
|
|
|
|
|
|
Robot deburring solutions
Intelligent solutions to save time and costs
Have a look at our Videos !
As insider, you know that being at the cutting edge of automation is crucial in special machine construction. When installing pneumatic spindles and build-in motors by MANNESMANN DEMAG Drucklufttechnik KG , you can be sure that state-of-the-art technology, maximum reliability and serious top-rate quality will bring the key advantages to your automation
process.
Robot tools for deburring
Our product range offers tailor made solutions for fettling and deburring of different materials. The cutting-edge programm offers problem solving solutions like
- High revolution speed deburring and grinding spindles for robots
- brushing motors for robots
- filing tools for robots
- countersinks for robots
- angle -countersinks for robots working in difficult to access areas
- angle grinders and angle brushing motors for robots
- grinding spindles with compliance for robots and CNC machines
The revolution speed range varies from 100.000 to 120 rpm.
In addition to the the classic grinding and deburring spindles the brand new non-lubricated turbine spindles offer excellent surface finishing opportunities.
|
|
|
|
