|
|
Without a doubt, Stanley hydraulic pumps exemplify the pure power of hydraulic tools. Our SM50 pump discharges an impressive 500 gallons per minute (1890 lpm) while it's small size allows it to fit in a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).
Like our detwatering pumps, the pure power of hydraulic tools is also exemplified in our trash pumps. Our TP03 pump discharges an impressive 450 gallons per minute (1688 lpm) and can handle up to 3 inch (76 mm) diameter solids. Our TP08 discharges 800 gpm (3028 lpm) and can handle up to 4 inch (102 mm) solids.
|
|
Dewatering / Semi-Vortex Submersible Pump
Compact design and high durability for various dewatering and sewerage applications
Pump Description
a.Fully water-resistant cable entry.
b.Heat treated 410 stainless steel motor shaft.
c.Durable cast iron outer case achieves superior heat dissipation.
d.Double mech. seal (shaft seal) in two versions-
Version () as standard for heavy duty application: Silicon Carbide +
Carbon/Ceramic
Version () as normal for domestic application: Carbon/Ceramic +
Carbon/Ceramic
|
|
Gorman-Rupp's SM Series line features Mine Safety and Health Administration (MSHA) approved submersible pumps for coal and gassy mines. Many models are available with stainless steel fitted parts or all-stainless construction for pumping in severe corrosive/abrasive applications. Standard with NEMA type 10 explosion-proof control box.
Specifications
Size: 2" (50 mm), 3" (75 mm), 4" (100 mm), 6" (150 mm)
Max Capacity: 2,100 GPM (133 lps)
Max Head: 380' (116 m)
Max Solids: 0.5" (13 mm)
Max Temperature: 122 F (50 C)
Materials of Construction: Aluminum, Cast Iron, Ductile Iron, Stainless Steel
Motor - Voltage: 460 V 3P, 575 V 3P
Motor - Cycles: 60 Hz
|
|
The pumps are suitable to transfer liquids containing impurities measuring up to 2-3 mm .The hydraulic components, namely the brass impeller and the aluminium scroll and pump body allow the pumps to be used with water, emulsions and oily substances in general with a maximum viscosity 3°Engler (21 CST). The temperature of the liquid must not exceed 90° C.
|
|
These hydraulically powered self priming submersible pumps are used on jobs that require pumping high volumes of water at low to medium heads. Lake drainage, tank filling, cofferdam dewatering and flood control are just a few applications where these pumps are widely used.
Discharge Sizes 15, 20, 30, and 45 cm (6, 8, 12, & 18 inch)
Maximum head up to 18 m (60 ft)
Maximum flow up to 37,850 lpm (10,000 gpm)
Hydraulic flow required 26 to 265 lpm (7 to 70 gpm)
Maximum Hydraulic Pressure 198 Bar (2,900 psi)
|
|
These hydraulically powered submersible Slim Line pumps are designed to fit into a well casing from 101 to 330 mm (3 to 13 inches) and are used for general purpose dewatering applications. These pumps have been used for blast hole dewatering, bulk/manhole dewatering for utility applications, deep well dewatering, and mine dewatering.
Discharge sizes from 31.8 to 152 mm (1.25 to 6 inch)
Maximum Flows from 246 to 5015 lpm (65 to 1325 gpm)
Maximum Head up to 64 m (210 feet)
Hydraulic Input from 17 to 163 lpm (4.5 to 43 gpm)
Hydraulic Pressure Required up to 170 bar (2,500 psi)
|
|
SPP Pumps manufactures a comprehensive range of hydraulic submersible pumps in the Hydra range. Covering the widest extent of applications with over 30 highly efficient pump ends, which are available in various material
options to suit the application. This provides the market with one of the largest ranges of hydraulically driven submersible pumps in the world. Driving these pumps is a range of over 25 power pack combinations to ensure optimum performance and efficient matching of the
overall package.
The design of the pump ends provide an enhanced performance and a range that covers medium and high head as well as high flow applications. The Autoprime Hydra product ranges from 32mm (1.25") to 450mm (18")
discharge with heads up to 130m (425ft) and flows up to 2,300m3/h (10,100 USgpm).
|
|
These hydraulically powered self priming submersible screw pumps can handle light to heavy liquids. They have a positive displacement screw pumping action on heavier viscous liquids and perform like a centrifugal pump when handling lighter materials. Typical uses are tank cleaning, ship & barge offloading, and oil skimming applications.
Discharge sizes 7.6 and 10.2 cm (3 and 4 inch)
Solids handling up to 5.1 cm (2 inch)
Maximum flow up to 4,350 lpm (1,150 gpm)
Maximum head up to 61 m (200 ft)
Maximum hydraulic flow required 61 lpm (16 gpm)
Maximum hydraulic pressure 244 bar (3,600 psi)
|
|
This range of solids-handling pumps is extensive. From our very portable 2” vortex flow pump to the big 12” high performance model, we have a pump to cover just about every job. These versatile pumps are used to move liquids with semi-solids such as sewage, sludge, jobsite debris and industrial waste.
Hydraulically powered submersible self priming solids handling trash pumps.
Discharge sizes from 5 cm (2 inch) to 30 cm (12 inch)
Solids Handling up to 12.7 cm (5 inch)
Maximum heads up to 64 meters (210 feet)
Maximum flows up to 32,000 lpm (8,500 gpm)
Available in ductile iron, aluminum, and stainless steel construction.
|
|
The shredder pump is used to chop material as it enters the pump to keep the solids from clogging the discharge pipelines. This pump is typically used on municipal, industrial and agricultural waste pumping application.
• Maximum output up to 3,000 lpm (800 gpm)
• Discharge size 101 mm (4 inch)
• Open-Vane Shredder Impeller with Tungsten Carbide Cutting Tip
• Hardened Macerator Suction Plate
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Versions for Portable or Fixed Installations
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT15 to HT25 power units or other hydraulic power sources capable of flows of 10 - 15 GPM
|
|
These hydraulically powered self priming submersible pumps are designed to stir solids into suspension and pump the mixture away. A built-in agitator works to loosen the material. The wear parts are hardened to handle abrasive materials. Typical uses are beach reclamation and silt dredging in lakes and marinas.
Discharge sizes of 7, 10, and 15 cm (3, 4, and 6 inch)
Output flows of 1740, 2760, and 4730 lpm (460, 730, and 1250 gpm)
Solids handling up to 3.8 cm (1.5 inch)
Maximum head up to 41 m (135 feet)
Hydraulic flow required 106 lpm (28 gpm) maximum
Maximum hydraulic pressure required 190 bar (2,800 psi)
|
|
These pumps are suitable for transferring clean liquids containing impurities measuring up to 2-3 mm.
The hydraulic components, namely the impeller, scroll and pump body in PBT. allow the pumps to e used with water, emulsions and oily substances with a maximum viscosity of 3° Engler (21 CST).
The temperature of the liquid must not exceed 70° C.
|
|
The pumps are suitable to transfer liquids containing impurities measuring up to 2-3 mm .The hydraulic components, namely the nylon impellerand scroll and the aluminium pump body allow the pumps to be used with water, emulsions and oily substances in general with a maximum viscosity of 3° Engler (21 CST). The temperature of the liquid must not exceed 90°C.
|
|
JJ Series submersible pumps are designed for installation in wells with guide rails. These pumps are designed specifically for solids handling and incorporate several engineering features that prevent jamming and clogging, the two most common problems in pumping fluids containing solids. These models feature a semi-axial flow impellers that have a large free passage that will handle up to 5.5" diameter spherical solids, depending on pump model. The impeller design has long screw-like vanes for handling long rags and other debris. JJ Series pumps have a cooling jacket and do not require submergence to maintain correct operating temperatures.
Specifications
|
|
|
AFEC Pump develops this grinder pump featuring a grinder mechanism at the suction port to chop foreign matters like kitchen waste, cloth, rubber, plastics, and etc. contained in drainage. The pumps are designed to pump small quantities of water, and large solids are effectively cut into very fine particles that can be pumped through small pipes without risk of blocking. Its extreme high pressure at low flows with only limited motor power makes it the first choice for small-volume transfer of residential, industrial and municipal sewage treatment systems.
|
|
The SludgeMaster submersible, air-powered trash pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1.5" (3.8cm). High capacity - low head. It weighs only 59 pounds (26kg), and can fit through an opening as small as 14" (35cm). Sturdy construction for rough handling and long life. Optional rock screen available.
Pipe Size: 3" / 80mm
Displacement Per Stroke: - gal / - ltr
Max. Flow per Minute: 300 gal / 1140 ltr
Max. Solids Handling: 1.5" / 38mm
Max. Discharge Pressure: - PSI / - BAR
The PortaPump submersible, battery-powered pump operates using any 12-volt car or truck battery. It comes equipped with cables and battery clips. Extremely portable, the pump weights only 33 pounds (15kg) and can fit through openings as small as 10" (25cm). Electrically safe and whisper quiet.
Pipe Size: 1.5" / 40mm
Displacement Per Stroke: - gal / - ltr
Max. Flow per Minute: 43 gal / 163 ltr
Max. Solids Handling: 1/16" / 1mm
Max. Discharge Pressure: - PSI / - BAR
|
|
Quick suctioning immersion pumps equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding.
Axial / semi-open impellers
Inflated fluids / slurping
25 ... 2750 l/min
5 ... 115 m
|
|
SP4",6" and 8" submersible pumps are made of corrosion and abrasion resistant stainless steel and have been developed in accordance with state-of-the-art technology.The SP series of pumps are manufactured to the highest standards for energy efficiency,high performance,rugged construction and long service life for the most demanding applications.
Operating Limits
50Hz
- Capacity : max. 120m3/h
- Head : max. 432m
60Hz
- Capacity max.150 m3/h
- Head : max. 540m
- Liquid temperature : 0ﾟC to+60ﾟ
- Sand content : Max. 50g/ m3
Applications
- Residential Potable water supply from deep wells
- Municipal and industrial waters supply
- Irrigation and other agricultural applications
- Fire fighting systems
- Pressure boosting in high-rise buildings and other applications
|
|
These rugged, chemical duty pumps are available in CPVC (Corzan®), fiberglass reinforced Polypropylene, and PVDF. Precision molded, dynamically balanced, "enclosed" impellers allow pumping of abrasive solutions and operating against closed discharge valves.
|
|
|
The WQD is a single open impeller centrifugal submersible drainage pump designed to function either parity or totally submerged.
|
|
APPLICATIONS
* RAIN, SEEPAGE, SUMP PIT AND CATCH TANK WATER PUMP OUT
* GARDEN AND VEGETABLE-GARDEN MINI FLOOD IRRIGATION SYSTEM RAINWATER CATCH TANK PUMP DOWN
* WHITE WATER PUMP OVER FROM RESERVOIRS AND VATS.
* PUMPING DIRTY WATER WITH POSSIBLE FLOATING SOLID CONTENTS (ONLY VOX SERIES)
DESIGN ENGINEERING
* SEMI WET MOTOR WATERCOOLED
* SEALING RING -ENGINE FACE OIL BATH MECHANICAL SEALS
* PERMISSIBLE DRAUGHT OF WATER: 5 m
* IP 68 PROTECTION CLASS.
* CLASS “F” INSULATION.
* MAX. PUMPED LIQUID TEMPERATURE: 50°C
* BY PASS SECTION: 10 mm MIZAR 30/S-60/S
20mm MIZAR 60/S VOX.
|
|
Construction
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- These new rustproof materials are resistant to corrosion, indeformable at maximum temperature differentials in the pump and motor and resistant to internal and external strain.
- Shaft of chrome steel AISI 430. Three lip seals in NBR.
- Minimum dimension and high levels of performance, for flow rates up to 200 liters/min.
- With float switch for automatic start/stop.
Applications
- For clean or slightly dirty water.
- For draining flooded rooms or tanks.
- Extraction of water from ponds, flowing water or pits for collection of rain water.
- For irrigation purposes.
- For use outdoor, the power supply cable shall have a length not less than 10 m.
|
|
Description.
We plan and manufacture high quality submersible electro pump, using the best materials available on the market, Such materials are chosen evaluating the characteristics of the fluid: grey lamellar graphite cast iron …INOX AISI 316 Steel, Duplex, Hasteloy and Marine Bronze. Reliability and duration of Faggiolati products are granted by a perfect balance of the shaft and the impeller and by certified vibration and waterproof resistance test under high reliability.
The product range includes electro pumps which runs from 0.5 Kw to 110 Kw with 2-4-6 poles (50 and 60 Hz) Different type of hydraulic are: Single channel – channels – high efficiency vortex type – drainage – grinder.
Uses
The right type of material is chosen taking in consideration the numerous type of hydraulics , it allow the use of our pump, on salty water and different type of treatment plants as: desalination plant, sewage water raising, pumping and draining of aggressive liquids, industrial waste waters
|
|
The US 75 - 155 series submersible drainage pumps are used for all applications where particularly dirty wastewater with large particle sizes of up to 50 mm need to be pumped. These pumps, with a free passage of 50 mm, pump solids and fibres quickly, reliably and, most importantly, without blockages
- 50 mm free passage
- discharge branch 2"
- Hmax = 13 m
- Qmax = 32 m3/h
|
|
|
|
|
|
FS Series FS-237/337/355/455
Construction Dewatering Pumps
Compact design, high performance and exceptional durability for handling abrasive liquid, widely used on general construction and civil engineering..
Pump Description
Designed for continuous duty with stable operating performance to carry dirty or clean water, for drainage and irrigation purpose. It features an up-discharge and double-casing design and the motor is always cooled by the pumped liquid, which gives it a superior cooling effect and long-lasting running no need to be personally attended on site. The pump is constructed of:
a.fine casting discharge outlet and top cover,
b.rigid stainless steel outer case and strainer,
c.quality stainless steel 410 motor shaft protected by sleeve against
direct wear by the contact parts,
d.double mechanical seals (lower silicon carbide V silicon carbide,
upper carbon/ceramic) in oil chamber,
e.dynamically balanced high chrome steel impeller,
f.lubricated-for-life and maintenance free bearings to support shaft,
g.and standard 10 meters (33 ft) power cord (or longer upon request)
|
|
Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. The are mounted on top of the container, the pump extension being immersed in the coolant.
Semi-open impellers
Standard coolant pumps
25 ... 3200 l/min
4 ... 115 m
|
|
The D1 and DD1 are enhanced replacements of the durable SS1 series pump. The 1/8 HP motor with 1/2" diameter extended shaft and (4) precision machined pump mounting pads ensure trouble free performance for the more demanding industrial applications.
Precision molded, dynamically balanced, semi-open impellers with a unique "tandem" design allow for its ability to operate against closed discharge valves.
|
|
APPLICATIONS
* FOR SWIMMIG POOLS
* FOR EMPTYING BOAT
MAIN FEATURES
* BODY PUMP: PP30FV
* INSULATION CLASS: F
* PROTECTION CLASS: IP 68
* IMPELLER: Noryl
|
|
Description.
We plan and manufacture high quality submersible electro pump, using the best materials available on the market, Such materials are chosen evaluating the characteristics of the fluid: grey lamellar graphite cast iron …INOX AISI 316 Steel, Duplex, Hasteloy and Marine Bronze. Reliability and duration of Faggiolati products are granted by a perfect balance of the shaft and the impeller and by certified vibration and waterproof resistance test under high reliability.
The product range includes electro pumps which runs from 0.5 Kw to 110 Kw with 2-4-6 poles (50 and 60 Hz) Different type of hydraulic are: Single channel – channels – high efficiency vortex type – drainage – grinder.
Uses
The right type of material is chosen taking in consideration the numerous type of hydraulics , it allow the use of our pump, on salty water and different type of treatment plants as: desalination plant, sewage water raising, pumping and draining of aggressive liquids, industrial waste waters
|
|
|
Gorman-Rupp Widebase submersible pumps tackle the big jobs. Where large solids are not a problem, these versatile models offer high-head, high-volume operation and stand up to the abuses of the worst conditions. Whatever the application – general construction, strip mining, tunnel work or general purpose – Gorman-Rupp Widebase pumps are built to operate quietly, effectively and safely.
|
|
|
|
