|
|
|
Low cost submersible water pump for use with sewage treatment systems, rainwater harvesters, flood recovery and emptying of swimming pools.
|
|
Slurry removal is an essential part of day-to-day
operations in a wide range of industries, such as
mining, ore dressing, sand contracting, ash handling
and steel milling.
The applications in these industries make heavy
demands on the slurry pumps, particularly in terms of
the costs incurred when it comes to wear and tear,
repairs and maintenance.
In this series of pumps the wet end, indeed all wear
parts, are made of hardened high-chrome cast iron,
which provides complete wear protection. The highchrome
impeller, incorporates a swept-back design for
sustained high efficiency and clog-free performance in
the most severe applications.
The drive unit can be easily detached from the wet
end for fast access to wear parts. And there is no
need to replace the entire wet end because the split
casing design enables the volute lining to be easily
accessed and replaced.
Flygt is the only manufacturer that offers its customers
a total solution for slurry handling. The pumps can be
supplied with an agitator and/or a mixer for a cleaner
sump. Optional internal cooling allows pumping down
to low levels, avoiding sediment build-up – we call it
Clean Sump Technology.
Slurry pumps have capacities of up to 350 l/s and
pump heads up to 100 metres.
|
|
Amarex N
Our pumps and valves handle municipal and industrial waste water, keep buildings and property well drained, and serve in sundry pumped drainage systems.
Wherever and whenever waste water has to be handled, look to us for first-class solutions: pumps, valves, automation, drives and systems - all in application-geared designs. Impressive availability and economic efficiency for every application.
|
|
ABS submersible sewage pump AFP
ABS submersible pumps from 1.3 to 1,000 kW (1.7 - 1,300 hp) for reliable and economic pumping of heavily polluted sewage in commercial, industrial and municipal applications. Water pressure-tight encapsulated flood-proof motors in standard or explosion-proof versions with option of jacket cooling system. Suitable for both wet and dry installation. Hydraulics with open or closed, single or multi-vane impellers suitable for handling of clear water, polluted water, sewage containing solids, faecal slurry and sludge.
|
|
Sewage pump with ceramic coating Ceram C0
Applied in airless procedure. For interior and exterior surfaces in contact with the pumped liquid resistand against salt water and industrial sewage. Layer thickness 400µm, adhesion 15 N/mm2, solvents free.
|
|
Characteristics
- Vertical.
- Single Suction.
- Single Stage.
- Submersible Motor.
Applications
- Water.
- Rain Water.
- Combined Sewage.
- Sea Water.
- Cooling Water.
- Sludge.
|
|
MINI-SVO
CARACTERISTICS
2 pole 50 Hz
OPERATING LIMITS
Flow up to: 18 m3/h
Head up to: 10 m CL
APPLICATIONS
Lifting of domestic waste water:
- sewage water
- rain water loaded with mud and non rigid particles with traces of hydrocarbons or washing products.
For:
• Housing.
• Garages.
• Parking lots.
• Restaurants.
• Boiler rooms.
ADVANTAGES
• Suited for small sumps: small size and vertical discharge port
• Reliable: double sealing (mechanical seal + lip seal) and vortex impeller
• Safety in case of motor out-of-water occasional operation: oil bath motor
• Long life: tough materials • Automatic operation: integrated float switch (single-phase version) ; optional (three-phase version).
• No particular maintenance. Easy impeller cleaning thanks to fast disassembly. Low weight.
• Supplied ready for fitting (single-phase version)
• Quiet operation
|
|
The CP 10 and CP 20 submersible pumps are designed with the performance and durability which make them ideal for removing water from trenches, ditches, manholes, industrial sumps and excavations. Will pump down to within 7/8' (22 mm) from base.
* Single-stage centrifugal units driven by powerful vane motors
* Double seals protect bearings and motor from water and mud
* Integral oiler provides continuous lubrication
* Integral strainer, air inlet valve
* Bronze impeller
* Cast-iron housing
|
|
All of us need clean water
All the water man uses is returned to the natural water cycle and so rivers, lakes and ground water are threatened with pollution.
To avoid this is the task of sewage treatment plants. This task is difficult but it can be solved. In order to do this, they are assisted by WILO submersible motor pumps.
Competence in Sewage Plant Technique
We have been manufacturing submersible motor pumps for water treatment and sewage purification for purification for several decades.
Installed in sewage plants, storm water retaining basins or pumping stations, WILO pumps contribute worldwide help to solve sewage problems thoroughly.
- Pumping unscreened sewage
- Evacuation of grit collectors
- Pumping to digesters and thickeners
- Aeration of activated sludge and its circulation
- Circulation of hot sludge and digested sludge
- Pumping return sludge
- Skimming off excess sludge
- Pumping out ditches
|
|
The S6CSL pump is designed to use in applications requiring settled solids to be put into suspension and pumped with the discharge water. Primary applications include desilting waterways. Other jobs may include filling sand bags to prevent beach erosion, tank and digester cleaning or pumping sediment from caissons.
- Hardened Alloy Wear Parts (600 Brinnell)
- Built-in Agitator for Stirring up Solids
- Variable Speed Hydraulic Drive
- Small Size Allows Pump to Fit Through a 22 inch Opening
- Oil Lubricated Double Seals (Can Run Dry)
- Safe Hydraulic Drive Can Be Used Where Electric Power is Hazardous or Impractical
- Wide Range Performance Curve allows use of Hydraulic Flows up to 28 GPM to Suit Application
- Operates With Our 50 HP to 70 HP Power Units or Other Hydraulic Power Sources with flows to 28 GPM
|
|
During the design process of the Warman SHW pump extensive use was made of finite element stress analysis software in conjunction with unigraphics solid modelling to ensure maximum mechanical integrity of the major pump components.
Combined with the use of an A05 28% high chrome alloy wet end mounted on a havy duty iron motor housing, the Warman SHW pump represents the most dependable, long lasting and rugged submersible slurry pump available.
This dependability results in the lowest cost of ownership.
|
|
For pressure drainage of with long discharge pipelines possessing small cross sections. The cutting system before the impeller disintegrates sewage constituents to the required size.
Rotor made of Abrasit.
|
|
Features and Benefits
Silicon bronze, multi-vane semi-open impeller with pump-out vanes for mechanical seal protection.
Heavy duty cast iron, volute type casing for maximum efficiency.
Dual Mechanical Seals
Optional Seal Sensor Cord located in oil-filled chamber.
Stainless Steel Shaft and Fasteners
Applications
Designed for high head sewage applications where a gravity system is not practical.
Ideal for pressure sewage systems.
|
|
Introduction:
The type EWQ pump is a single stage, single suction, vertical, centrifugal submersible sewage pump that is integrated with motor into one unit submerged in water to work.The type pump has advantages of compact construction, small volume, lightweight, easy installation and free movement.
Application:
It is designed for pumping the sewage at a temperature less than 40 and liquid containing solid particles (such as:Sludge, iron oxide, coal slurries.) medium and etc.
Notation:
E:Excellence
wq:submersible slurry pump
|
|
PUMPEX new sludge pumps, series SK – is a complete range, from 3" to 6”, of heavy duty, transportable, sludge pumps in cast iron.
PUMPEX sludge pumps SK 65-155 are available in high head and high flow versions with submersible motors from 1.3 to 25 kW.
The SK range is an important extention of Pumpex well known SP sludge pump series.
Product benefits Pumpex SK pumps
Trouble free and safe handling
PUMPEX sludge pump SK is a portable pump and features a sturdy stainless steel handle and a robust ductile iron stand.
Non overloading performance
All SK sludge pumps can operate over the entire performance curve without overloading the motor.
Easy service and maintenance
Modular design through the complete range with interchangeable spare parts makes maintenance and service easier.
Dry running capability
A closed cooling system enables the PUMPEX SK 83-155 to run dry, with no damage to the mechanical seals or the motor.
Solids handling capability
The SK sludge pumps are fitted with free flow vortex impeller and pump housing that provides excellent non clogging performance.
High reliability
PUMPEX SK 83-155 have cartridge seal unit with double mechanical seals for long life even under the most demanding operating conditions.
Environmentally safe
The oil housing on the SK 65-80 is filled with environmentally safe white oil and l friendly protection coatings are used on all the surfaces.
Explosion proof option
All SK sludge pumps are available in explosion proof versions EExd IIB T4 and ATEX.
High flexibility
The pump can operate in any position, vertical or horizontal.
|
|
| ... products without technical information |
| |
Singled stage - enclosed mixed flow type impeller for pumping wastewater and other liquids with soft solids.
Specifications:
Capacities to 23,000 GPM (5223 m 3 /h)
Heads to 85 feet (26 m)
Solids to 9 inches (229 mm)
Design Features:
Back Pull-Out
2 Vane, Non-Clog Impeller
Renewable Wear Parts
Maximum Sealing Flexibility
Patented Equiseal Available
Tapered Shaft Design
CW & CCW Rotations
5 Discharge Positions
Patented Tri-Base
External Impeller Adjustment
|
|
High compression ratio for a steader flow and better efficiency
In Ragazzini pumps the piston stroke is longer than the diameter of the cylinder; this results in a high compression ratio and therefore an higher flow rate with a smaller number of revolutions. It is a pump with slower movements but a longer piston stroke. The whole mechanical part is thus improved, but in particular you obtain a more constant and compact flow, a greater self-priming capacity.
More efficient compensation to avoid any vibration and wear in the pipes
In Ragazzini pumps the dampeners have the shape and size that is most suitable for an uniform distribution of the high working pressure. They are placed directly on top of the suction and delivery pipes. In Ragazzini pumps the phenomenon generated by alternated pressures is already limited, but such an high compensation, so close to the pipes where the pressure is discharged, totally is eliminated.
More linear thrust to avoid mechanical wear and energy losses
The “sector” movement driven by a double support, common to all Ragazzini models, allows for the perfect alignment of the piston, thus providing the linear thrust necessary for the correct functioning of the piston gaskets and of the seals with Teflon gland rings.
|
|
Geho Pumps have gained a world-wide reputation for consistently meeting customer's requirements.
Geho TZP
These pumps handle :
Moderate abrasivity
Medium viscosity < 8000 m.Pa.s
Mild corrosivity
Up to 8mm particle size
Up to 75% solids content
|
|
Pumpex engine driven diaphragm pump DP3 - a compact unit on wheels, complete with gear box and a 4hp gasoline engine. The DP unit is totally self priming. The dry running capability and high percentage solids passage makes the DP3 suitable for seepage pumping of sludge and muddy water with high solids content.
Trouble free and easy handling
PUMPEX diaphragm pumps are perfect for muddy water, sludge or any water with high solids content. They are ideal for slow seepage applications or cleaning up the bottom (of sumps or tanks). The pump and engine are mounted together. It has handle and wheels so it can easily be moved to where it is needed, making installation and operation easy.
|
|
|
|
