|
|
Specially designed for vacuum applications
High flexibility and minimum curvature radiuses make it ideal for cable chains.
|
|
| ... products without technical information |
| |
Applications:
heating or het-loss free transport of: oil, grease, wax, resin, tar, paint, water, carbon dioxide, plastics, sealants, etc...
Emplyable pressurised hoses of PTFE from DN 4 to 50 mm; pressure train depending on nominal width up to 600bar.
|
|
HEATED HOSES - for gas and liquid transfer.
During Gas Analyzer Sampling, Hot Melt Transfer, Petroleum or Chemical Transfers, or Food Processing, it is needed to maintain critical temperatures, to avoid condensation of gas or drop in fluid temperature. Thermo Heated Hoses aptly cater to this need, by ensuring that the fluid in the process tube (part of the heated hose), looses no heat.
These flexible and lightweight tubes can withstand aggressive high pressure fluids and high temperatures involved in transfer of fluids.
Construction
Heated Hose comprises of a process tube bundled with insulated electrical heating element and wrapped with a heat reflecting foil. Temperature sensor is provided at about 300 mm from power connection end. This bundle is insulated and provided with an outer jacket. Ends are sealed suitably and electrical connections for both power and control are brought out.
|
|
Application Pontencial:
Submersible heaters, containers, valves, pumps, form, process and plate heaters.
This mineral-insulated heating cable with a braiding of high grade stell 14541 is applicable within extreme corrosive and damp surroundings. The HIL heating cable is extremely robust and easy to bend. The stainless stell brainding is waterlight, oiltight and gastight. An utilisation temperature of up to 800°C enables a variety of applications. The cold end of the heating cable can be fed into a terminal box and connected by means of a MX20X1.5 screwed connection.
|
|
|
The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety.
|
|
At ECAS, we manufacture heating cables and flexible electric elements, for temperature control systems in networks of pipes.
The main purpose of pipe tracing is to avoid and compensate for the loss of heat certain fluids undergo during particular production processes.
Of utmost importance is that the fluid or product flowing in the pipes does not freeze, change viscosity, or harm the piping network.
For sanitary hot water systems, our pipe tracing system avoids the cooling of the water, especially when it is not moving, avoiding the spread of Legionnaire disease.
Heating cable:
For pipe tracing projects we recommend constant power parallel heating cable, model CTCS.
The parallel heating cable has a constant lineal wattage even when it is cut to required length.
Control and regulating :
We have different types of control and temperature regulating solutions, which are adaptable to all kinds of projects, and/or the needs of our customers.
Below are some of the control systems:
DPA: Control and regulation box to connect between 1 and 4 circuits, from 8A to 63A at 230V.
EWDR 902 - T: Digital Thermometer/Thermostat.
ETV - 1991- P: DIN/Omega rail electronic modular analogue thermostat.
ETN - 2P - 1441: DIN/Omega rail electronic modular analogue thermostat with mini-switchboard.
|
|
Electrical Heated Jackets/Sleeves
********************
Insulation Jackets/Sleeves
- Customised manufacturing
- Superior workmanship and high quality materials
- Applicable for pipes and hoses as of DN 50
- Maintenance temperature up to +250°C
- Temperature-resistant up to +500°C process temperature
- Heating by fixed resistance heater cable (controlling required)
- Wired ready for connection - also as serial connection of multiple jackets
|
|
| ... products without technical information |
| |
Applications:
Heating or heat-loss free transport of: oil, grease, wax, resin, glue, hotmelts, tar, paint, water, carbon dioxide, plastics, sealants, etc.
|
|
Jetting Heads
The proven SX- and AX100 jetting heads are applying low- to medium viscose hotmels very precise and without stringing in form of dots or bead pattern. The pneumatically actuated applicator heads are characterized by their high reliability, a minimal need for maintenance and the modular structure.
Jetting Heads SX
* Small dimensions – ideal for smallest space conditions and box formats
* Fast switching – higher machine speeds
* Excellent cut-off – no tripping or stringing
* Integrated filter - prevents nozzle blocking
* Double acting jetting elements
* Long lifetime
Jetting Heads AX100
* Lasting and operationally safe
* Precise and reliable
* No drooling or stringing
* Proven modular design
* Exact temperature control
Jetting Heads AX300
* Medium to higher volume
* Thermoplastic Adhesives, PUR Hotmelts, Sealants, Butyl
* Nozzle diameter 1 … 3.5 mm
* Improved tear-off by means of auxiliary air nozzle (option)
Robatech systems are featuring
* Full modularity and compatibility, system solutions by combining modules
* Few spare parts needed
* Field proven products, low maintenance cost, low life cycle cost
* Swiss quality
|
|
|
|