|
|
Entis LNG Pro is the latest Windows™ based application for storage management of liquefied natural gas (LNG) in bulk storage tanks under cryogenic conditions.
Entis LNG Pro is based upon the proven Enraf Entis concept, seamlessly integrating all tank instrumentation, and combining interfacing and supervisory control into one platform. This concept provides operators with all key LNG information at a glance.
A comprehensive set of dedicated operations screens for monitoring stored LNG product behavior, makes this software application the only package you need for all your LNG storage monitoring and control needs.
Special operator screens display all necessary profile data for the operator to determine LNG product behavior, controlling stratification build up and other unwanted situations.
Advanced inventory management, trending and reporting capabilities complete the functionality of Entis LNG Pro. Both observed and calculated data are stored in the program database for evaluation purposes. |
|
| One of Allen Gears key assets is the ability to use our extensive knowledge of gear technology and application requirements to provide solutions that achieve the optimum transmission solution for the desired drivers. We achieve this through combining the transmission technologies of parallel shaft, epicyclic and bevel gearing to produce combination gearboxes that best meet the installation and operation requirements. |
|
They are used as safety- and function elements in order to damp speed and to slow down masses.
The damping speed of the adjustable dampers can be adjusted when the damper is already installed. |
|
Vertical Filter Separator
The Plenty Vertical Filter Separator will remove 100% of all droplets 8-10 microns and larger and 99.5% of all droplets ½-8 microns in size.
It will also remove 100% of all solid particles, 3 microns and larger 99% of all particles ½-3 microns in size.
These operating efficiencies apply over the entire flow range from maximum design down to virtually zero flow.
The first stage of the filter separator consists of a number of glass fibre coalescer /filter elements through which the wet gas passes.
The small liquid drops carried in the gas stream are trapped within the glass fibres of the element and coalesce to form drops 100 to 200 times larger than the original size.
These drops pass through the element wall and are carried forward by the gas stream to the second stage vane type separator.
The second stage consists of a vane type impingement separator, which operates exactly as described for vane separator.
|
|
Chlorine gas dosing
VACUTROL
Change-over device (CHANGOMAT)
DOSITROL
Vaporator with safety device CSE
Our chlorine gas dosing systems are based on the vacuum safety principle and comply with the latest German safety regulations. Qualities such as the state-of-the-art standard of safety and corrosion resistance combined with only little maintenance to be done, contribute to the most distinguished reputation of our systems in the entire world.
|
|
Cata-Dyne™ Explosion-Proof Infrared Gas Catalytic Heaters are the industry standard for space or spot heating applications in hazardous environments. These include comfort heating for industrial buildings and installations, freeze protection for equipment and components, and drying or curing processes.
These heaters are available in 3 different configurations - standard unit, side mount controls and the Slim Line space saving unit - and over 20 different cabinet sizes. The explosion-proof catalytic technology used in these heaters is the most efficient in the industrial heating market, and their versatility and reliability have made them the heater of choice for many customers throughout the world. |
|
DETECT FUITES makes it possible to immediately locate any gas or air leak .
Checking of the sealing of pipings, taps, connections, valves of drains, without stopping their operation.
Usable for all types of gas and compressed air, including nitrogen and CO2. Warning, not to use on pure oxygen.
Detect even the mini-leaks, as well as the leaks under low pressure (7 mbar).
Higher ergonomics: All way product, usable with a capillary for a better precision of application, or with a diffuser '' broad cone '', to quickly check wider surfaces.
Biodegradable, non flammable, nontoxic and non corrosive product.
JELT DETECT FUITES Aerosol 650 ml Ref. 005501
|
|
Pressure switches for gas DG
Diaphragm pressure switch with micro-switch (silicone-free) for monitoring gas pressures in industry, for gas and air, also for biologically produced methane, with hand wheel for switching point adjustment, can be used as special-design pressure switch, EC type tested and certified.
Switching ranges: 0.5 to 500 mbar,
DG..B for positive pressure,
DG..U for positive pressure, negative pressure and differential pressure,
DG..H locks off with rising pressure,
DG..N locks off with falling pressure,
DG..I for gas negative pressure,
electrical connection: terminals or standard plug with socket.
The following versions are available: pressure switch with gold-plated contacts for voltages < 24 V,
pressure switch with control lamp,
pressure switch with diaphragm for oxygen and ammonia (not for fuel gas), pressure switch with external adjustment.
|
|
Wellhead control units (DHSV / MV / WV / BOP / ESD)
Hydraulic test units
Gas test units
Chemical injection units
Pressure range up to 30,000 psi
Valves, fittings, tubing according to NACE
|
|
| Air atomizing and hydraulic nozzles for evaporative cooling, NOx control, ammonia injection and more. Find out why our high-efficiency FloMax® air atomizing nozzles are quickly becoming the industry standard for gas cooling. |
|
Pressure range up to 1250 bar / 18,000 psi
Suitable for Air, Nitrogen, Argon, Helium and a wide range of other gases
Provided with Resato air-driven single acting, double acting or two-stage gas booster
Water-cooled Oxygen boosters available
All stainless steel construction |
|
" Bio-Gas by P.E. "
The "Bio-Gas Production & Mixing System by P.E." is applied in the Primary and Secondary Digestion with the aim to produce Bio-Gas through the ANAEROBIC DIGESTIONS of the Sludge.
Thanks to its properties, the "Bio-Gas System by P.E." performs:
> a continuous & controlled mixing of the sludge
> the uniformity of the digestion process inside the digesters
> the uniformity of the temperature (T) of the sludge to be treated
> the elimination of the thermal stratification
> the absence of any deposit inside the digesters
> the optimization of the process conditions , such as the intimate contact, fast digestion, no superficial crust ...
These performances enhance an Improvement of the Digestion Process that provides:
> an increase of the Treated Sludge Flow
> a decrease of the Residence Time (R.T.)
> an higher working flexibility
> an increase of the Bio-Gas production
Since no sludge/water separation and no maintenance are required, the “Bio-Gas System by P.E." guarantees an high utilization and high performances of the digester in which it is applied.
The heart of this system is the application of "Special Bio-Gas Diffusers" to guarantee a Forced & Controlled Mixing of the processed fluids: Sludge, Gas & others.
Thanks to his experience, P.E. can offer two types of Bio-Gas Diffusers:
> "Helixor Bio-Gas Diffuser"
> " Jet-Helix Bio-Gas Diffuser"
that satisfy the productivity required by the Clients, in accordance with their process specifications and operation competitiveness. |
|
| ... products without technical information |
| |
The miniature valves of the mircrovalve technology are particularly suitable for handling technology. The microvalve products offer high performance and require a minimum of space and cabling. The 2/2 and 3/2 directional valves with electro-magnetic activation and the nominal diameters 1,5 mm, 2,5 mm and 3,0 mm are in closed position when no voltage is present. With both valve types, pressure and vacuum may be switched. The MV microvalves consist of following components:
Valve cartridge
Valve cover (fixed or rotary)
Accessories
Direct integration of microvalves in either customized or universal systems, e. g. pneumatic actuator systems, is possible with a swivelling fitting. The modular design of the GAS microvalves enables the customer to fit optional throttles, silencers etc. via a thread on the rotary cover. |
|
The miniature valves of the mircrovalve technology are particularly suitable for handling technology. The microvalve products offer high performance and require a minimum of space and cabling. The 2/2 and 3/2 directional valves with electro-magnetic activation and the nominal diameters 1,5 mm, 2,5 mm and 3,0 mm are in closed position when no voltage is present. With both valve types, pressure and vacuum may be switched. The MV microvalves consist of following components:
Valve cartridge
Valve cover (fixed or rotary)
Accessories
Direct integration of microvalves in either customized or universal systems, e. g. pneumatic actuator systems, is possible with a swivelling fitting. The modular design of the GAS microvalves enables the customer to fit optional throttles, silencers etc. via a thread on the rotary cover.
|
|
The remarkable features of GAS linear motor actuators are oustanding with respect to repeatability, short cycle time, modularity and very low power consumption. Maximum workload capacity as well as low noise level are further decisive advantages in industrial use.
|
|
|
|
