|
|
Corona treater model BHSN ( BOPP-PET industry).
The field of BOPP-PET film has always been for years a key-field for ME.RO. Only an history and a very long experience can allow you to manufacture treaters able to guarantee a complete reliability as these big producing plants require. It is not by chance that nowadays ME.RO can be considered the most important mufacturer for this application. This is demonstrated by the fact that the most important producers of BOPP film around the world have joined our technology to reach important treatment results with no stops of production for years.
MAIN CHARACTERISTICS:
- Web width up to 10.500 mm.
- Specific power (energy density) kept strictly constant during running.
- Special electrode design to give the best transfer of power on the film and to maintain it clean during running.
- Special electrodes in AISI 316 stainless steel able to heat expand without modification of the pre setted air gap (easy heat expand system).
|
|
AcXys Technologies offers a fully integrated device, which can be combined with plasma equipment in order to realize coatings.
This device features a nozzle and a heating unit. Coating deposition is feasible on many materials. Small spots or wider areas can be processed as well.
Use appropriate nozzle for patterning applications.
|
|
| ... products without technical information |
| |
Dry Film Thickness Gauge acc. to Rossmann, Model 233
The difference in level between substrate and film surface is gauged by the contact point of the dial indicator.
Measuring range 0-1000 ìm in 5 ìm divisions.
|
|
|
|
|
|
Nor-Cal offers an extensive selection of commonly used quartz crystal feedthroughs, sensors and multi-channel monitors, cables, quartz crystals, accessories and replacement parts for use in semiconductor, optical and industrial thermal deposition processes. Custom feedthroughs are available with a variety of flanges in all sizes.
Our coating instrumentation products support one of the more popular methods of thin film measurement and rate control _ the crystal monitor, which utilizes the piezoelectric properties of a quartz crystal.
The electrical characteristics of the crystal, which is held in place by the sensor, change during deposition. Single sensors are generally used for short deposition runs, whereas, dual sensors allow for longer runs. Dual sensors require an airline to operate a pneumatic shutter which covers one crystal at a time. The sensor is either welded to the feedthrough or attached with connectors. Most sensors are available with cooling lines.
The application determines the correct choice of sensor. The sensor determines compatible feedthroughs and cabling. The chamber determines the appropriate feedthrough and flange. For application temps up to 150°C, electrical connection between the sensor and feedthrough is accomplished with a vacuum coaxial cable. A bakeable, one piece sensor/feedthrough replaces the standard in-vac cable with a stainless steel high-temp coaxial line for high temperature applications up to 300°C.
|
|
INFICON market-leading thin film deposition controllers and monitors control deposition rate and thickness of the most complex processes with unsurpassed measurement speed and precision. Enhanced software and logic I/O features allow the INFICON Thin Film Deposition Controller to be fully integrated into the vacuum system for automatic process control. To control less complex processes, use INFICON economical, precision controllers and monitors that measure films with 100 times more precision than conventional techniques.
All INFICON crystal-based instruments use our patented measurement system, ModeLock, making them the most advanced instruments available.
INFICON superior quartz crystals offer the highest reliability for millions of successful process runs. Available in 5 or 6 MHz with gold or silver electrodes, INFICON crystals are 100% factory tested to ensure quality.
|
|
Wet and Dry Film Thickness Gauge acc. to Rossmann, Model 296
The difference in level between substrate and film surface is gauged by the contact point of the dial indicator. Measuring range 0-1000 ìm in 5 ìm divisions. For measurements on wet films the contact point is raised by means of a knurled screw and then lowered until it touches the surface of the wet film.
|
|
Wet Film Thickness Gauge, Model 234
A hardened and ground double wheel with an eccentric cam in the centre is rolled over a newly applied film. The wetting line on the centre cam is read on a scale as wet film thickness. Total measuring range: 1500 ìm, available in 8 different subranges.
|
|
| ... products without technical information |
| |
Automatic vertical & orizontal packaging machines
- Built for mailing
- Cost savings by using film
- Safer way of mailing
- High performances & low consumption (from 1200 to 3000 pcs/hour)
|
|
The MSK shrink frame technique ensures targeted and metered generation of heat without flames. The optimum shrinking temperature ensures gentle warming of the film which retains its tensile force and fatigue strength. The heating systems developed by MSK are matched to the varying requirements of different industries.
|
|
Large-format sleeve wrapper with shrink tunnel
SUPER WRAP 1300 de Luxe In-Line
Furniture and shelf components, construction and insulating materials, multi-package bundles, and much more.
The large format sleevewrapper Super Wrap 1300 de Luxe In-Line and the shrink tunnel Universal 1300 NT with HV technology: this combination makes total closure transportation packaging possible, and does away with the need for additional fusion or sealing tools.
The innovative HV technology of the shrink tunnel is responsible for controlled overlapping and adhesion of the excess side film, without touching the product.
|
|
|
|
|
|
Automatic high-performance film wrapper "Delta 2000"
Automatic film wrapper for wrapping loosely stacked newspapers and magazines in PE film.
Special customer benefit:
- The packages withdraw the upper film from the film magazine with minimal force. The stacks do not fan out
- The lower film is delivered in sync with package conveyance. The film supplied is just sufficient for the present package
- Lateral welding can be integrated. You do not require a second machine, which takes up space. The unit can be retrofitted as optional equipment and does not reduce the capacity of the machine
- Servo drive for welding unit with very fast and accurate motion sequences. The film welding seam is easy to reproduce
- Frequency-controlled transport. Machine can easily be integrated
into existing lines
- Operation via Touchscreen, machine status and faults on plain
text display
- The operator only has to look after the buttons which he needs for the current machine status.
- Low-maintenance design. Low operating costs.
|
|
TM100 trailing edge seal overwrapper
-Wide range of pack capabilities
-Low capital outlay
-High speed up to 300 wraps per minutes
-Customised specifications
-Low maintenance
-Fast and simple size changeover
-Base seal or trailing edge seal
-Mechanical or servo operation
-Collating and multipacking
-Transparent or printed film
-Tear tape or perforation opening
-Heat, cold glue or hot melt sealing
Marden Edwards offers a complete portfolio of Overwrapping machines, otherwise known as cellophane wrapping machines. Ranging from low cost entry level machines to high speed integrated systems Marden Edwards has the Overwrapping solution suited to your need. Whether you are looking to overwrap to save production costs or to enhance your product's appeal, all Marden Edwards overwrappers produce the same high quality of wrap and have size change versatility built in. All Marden Edwards machines are straightforward to maintain and are very low cost to run.
|
|
|
|
|
|
Model: CMT2501;CMT2102;CMT2202;CMT2502;CMT2103;CMT2203;CMT2503
Capacity: 50N; 100N; 200N; 500N; 1kN; 2kN; 5kN
Features:
SANS's line of desktop Electromechanical Materials Testing Machines are designed to test a wide spectrum of materials including metals, plastics, rubber, textiles, paper, yarn, wire, adhesives, ceramics, timber, foils, composites and finished components in tension, compression, flexure or shear. Maximum frame capacities are from 50N to 5kN.
All testing hardware is fully complemented by SANS developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application.
Easy to use and operate
1. High accuracy: Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass +0.5% of reading
2. High sampling rate: The sampling rate 50Hz, reach advanced international level
3. High load resolution: Better than 1/300000, no step, and unchanged in full range
4. Multi-cycle control modes: Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination
5. High security: The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
6. Comply with different standards, such as ASTM, BS, JIS, ISO, IEC
|
|
Slip and Friction testing aids in the evaluation of chemicals and additives used to create or minimize the degree of friction between two contacting test specimens.
APPLICATIONS
Paper, Flexible Packaging, Foils, Rubber, Plastics, Wood,
Linoleum, Metal, Printing, Coatings, Composites
SPECIFICATIONS
* Selectable speed from 5 to 43 cm per minute (2 to 17 inches per minute)
* Selectable travel distance from 2.5 to 30.5 cm (1 to 12 in.)
* Meets TAPPI T816, T549, and ASTM D1894
FEATURES
* Digital display, storage and editing of up to 100 readings, and selectable units (COF or grams)
* Settable limits
* Statistics-average, standard deviation, high/low results.
* Report printout with built in printer
* RS-232
* Static and kinetic coefficient of friction calculated in one operation.
* Direct drive arm with unique skid control.
* Sled-connecting mechanism ensures level pulling action.
* Easily interchangeable sleds.
* Full color easy to read Display
|
|
|
|
|
|
The Falling Dart Impact Tester is intended for the determination of mechanical properties of packaging material such as plastic films, laminates and paper.
The tester comprises a horizontal base-plate on which a vertical column of steel has been erected and which on its top carries a release mechanism in which the falling dart can be inserted.
The dart consists of a hemispherical part of aluminium with polished surface and a diameter of 38.1 mm (1.5 in.), having a vertical shaft in the center of the flat top surface. Around the shaft additional weights can be fitted.
On the base-plate in the vertical center line of the inserted dart, a circular clamping device has been fitted. This clamping device consists of a firm and a movable cylinder, both having an inner diameter of 127 mm (5 in.).
By means of a handle operated excenter, a sample can be clamped slippage free between both cylinders.
The bottom of the firm cylinder has been provided with a 2-3 mm thick disc of soft rubber in order to eliminate damage of the falling dart.
SPECIFICATIONS
Falling Height: 660 mm (26 in.)
Weight of falling dart without additional weights: 50 g ± 0.5%
Additional weights: 5 pcs. of 5 g ± 0.5%
25 pcs. of 15 g ± 0.5%
5 pcs. of 100 g ± 0.5%
Falling speed on sample: Approx. 3.5 m/sec.
Meets ASTM Standard D 1709-62 Procedure A
Commercial Standard CS 227-59
TNO-Standard I.v.V. 2.15 1968
|
|
Friction Testers 1 kN (225 lbf)
NEW PRODUCT: Dedicated Friction Tester for Accurate Measurement of Static and Kinetic Coefficient of Friction
For use in the packaging and printing industries, the Lloyd Instruments FTPlus friction tester accurately measures static and kinetic coefficient of friction. These values are of importance in a wide range of industries including blown film, plastic sheet, paper and coating manufacture.
The FTPlus is a dedicated friction tester conforming to the requirements of ASTM D1894, ISO 8295 and TAPPI T549. The tester includes these standards as user configurable tests, with a further seven available for user custom configuration.
When using NEXYGENPlus material test and data analysis software , the FTPlus may also be configured as a universal material tester to perform tensile, compression, flexural and other mechanical tests up to 1 kN (225 lbf).
|
|
|
|
|
|
A dedicated system for the multi-axial impact testing of flexible sheet film to defined quality standards: ASTM D1709, DIN53373, BSI 2782 method 352D and ISO EN
7765. The test measures the film’s impact resistance and energy absorption characteristics, typically for quality control purposes. As standard the system accommodates films up to 1mm thick and tests with impact energies of up to 95 Joules.
Key Features:
• Designed for ease of use to reduce operator training time.
• A short, highly automated test cycle results in high throughput.
• Very rugged high reliability design suited to production environments.
• Drop height range 50mm to 1200mm continuously variable.
• Impact velocity range 1m/s to 4.85m/s continuously variable.
• Impact energy range 4J to 95J.
• High quality, laboratory grade instrumentation with traceable calibration.
• High resolution data acquisition.
• Full force vs. deformation graph calculated and stored for each test.
• Automatic calculation of all relevant results including failure deformation, failure energy.
• User-defined documentation information stored with each test.
• Automatic save of all data after each test, either to individual automatically named files, or to a test database.
• On screen reporting of selected test results.
• Standard report print-out.
• Export of results to Excel or a text file for independent analysis.
• Responsive life-time technical support.
|
|
|
Thin Film Polarizers (TFPs) can split a laser beam into two parts with orthogonal polarizations. Conversely, TFPs can be used to combine two beams with orthogonal polarizations. TFPs consist of a coated plate, which is oriented at Brewster’s angle with respect to the incoming beam. The thin-film coating serves to enhance the beam’s s-polarized reflectivity, while maintaining the p-polarized component’s high transmission.
|
|
|
Polarizers reflect S polarization and transmit P polarization. Optida Co. offers various types of polarizers and also could design optimised for your application.
|
|
| ... products without technical information |
| |
The Turbopack is a shrink column mounted on a trolley, easily operated by pushing, for quick and uniform shrinking of pallet covers.
Quick : only 60 seconds for one pallet (euro).
Independant and mobile : shrinking operation is possible anywhere in the factory or the shop, thus preventing the movement of unsteady loads for wrapping.
|
|
Model 975 Features:
Rugged aluminum body design - weighs only 3.3 lbs.
125,000 BTU
Safety trigger - automatically shuts off gun when released
Cool Combustor even after extensive use
2', 4', & 6' Extensions for shrinking large items
The Benefits of Shrinkfast:
Manufactured in U.S. - parts always available for immediate shipment
Factory reconditioning service available
Full 1 year factory warranty
Authorized Distributors around the world
UL listed
The Benefits of Shrinkwrap:
Protection from weather damage
Cost effective: (only pennies per pallet)
Shrinkfilm is waterproof - stretchwrap is not
Portable & versatile for any size job
|
|
- Shrink pistol for propane gas
- flexible hose of 8 meters
- safety valve
- gas cylinder cart (cylinder not included)
|
|
|
|