|
|
Plasma Spray is perhaps the most flexible of all of the thermal spray processes as it can develop sufficient energy to melt any material. Since it uses powder as the coating feedstock, the number of coating materials that can be used in the plasma spray process is almost unlimited. A high frequency arc is ignited between an anode (nozzle) and a cathode (electrode). Process gases (generally mixtures of argon, nitrogen, hydrogen and helium) flowing between them is ionized to become a plume of hot plasma gas with that exceed the surface of the sun of 6,600 °C to 16,600 °C (12,000 °F to 30,000 °F). When the coating material is injected into the gas plume, it is melted and propelled towards the target substrate.
Features of the Atmospheric Plasma Spray Process:
Large choice of coating materials, including metals, alloys, ceramics, cermets, carbides and others.
Coating systems are possible, using layers of different materials.
Produces surfaces for a wide variety of applications, including resistance to many different types or wear and corrosion mechanisms, desirable thermal or electrical characteristics, and surface restoration and dimensional control.
Excellent control of coating thickness and surface characteristics, such as porosity and hardness .
No heat affected zone or component distortion.
High deposition rate.
High bond of the coating to the substrate.
Coating of complex geometries.
Easy masking of areas that should not be coated.
Process can be fully automated.
Coating of internal geometries possible. |
|
Features and Benefits
+ Spray Develop, Clean
+ Up to 4000 rpm
+ Programmable recipes
+ High pressure spray and megasonic dispense options
+ Laptop option |
|
| Low-maintenance spray marking system produces neat circles and stripes between from .2%u201D to 1.2%u201D wide. A programmable air delay after each cycle prevents clogging, which greatly reduces maintenance and downtime. |
|
Sprymaster plants are washing booths provided with fixed or rotating internal platform for spray washing with a water-based detergent.
Operation is clean, odourless and fully isolated from the surrounding environment. The spraying chamber is closed by a front door driven by one or two pneumatic cylinder(s) or a motor reducer and racks. The ducts of the spraying nozzle network are oriented in the washing chamber.
The jet configuration has been arranged in such a way as to cover the surface of the items being treated through a procedure which includes chemical, mechanical and thermal functions. |
|
| This compact spray cleaning and drying system with process validation has been developed for various industries (medical, precision, electronics, watch making, ophthalmology etc.) and is available with one or two doors. |
|
The parts to be cleaned are placed into a revolving basket Rapid cleaning is achieved by spraying hot detergent solution from three spray pipes located around the backet.
Spécifications:
Basket diameter : 600 to 1100 mm
Maximum loading : 500 kg
Pump pressure : 2 to 10 bars
Applications:
Cleaning of parts
Cleaning of tools
Surface treatment
Cleaning of parts for reconditioning and renovation.
Degreasing of heavily contaminated parts within a few minutes..
Characteristics:
Enclosed environment
Strong stainless steel construction
Small space required
Short pay back time
Low consumption of detergent and energy |
|
parts resting in baskets or racks
charging operations
standard design in 2 (charging) sizes
customized adjustments
modular design
single or multi-stage washing and rinsing process
spraying, immersion, flood and blow-off cleaning, ultra-sound, hot-air drying, vacuum drying
turning and rotation of goods
manual and automatic charging |
|
The stainless steel constructed tunnel conveyor washer incorporates one or more stages (washing, rinsing, drying,...). It works within an enclosed environment and degrease parts by spraying hot detergent solution (from 1 to 5% of detergent). The conveyor conveys the parts to be cleaned.
Applications:
Continuous washing
Washing of parts prior to assembly
Degreasing of parts between process
Washing according to cleanliness standards.
Characteristics
Modular construction
Stainless steel construction
Easy maintenance with easy access to chambers and tanks |
|
| ... products without technical information |
| |
| Spray drying systems for the production of powders for the food , pharmaceutical and chemical industry. Installations are available with rotary disk and nozzle spraying technology ( for drying in co-current and counter-current ) and can include powder stabilization and cooling systems by fluidizing-bed or pneumatic transport with conditioned air. Surfaces in contact with the product can be , depending on the needs, stainless steel AISI 304, AISI 316 or special alloy. Air heating equipments depend on the processed product and can be indirect, direct or electric single or dual stages. Safety devices necessary to handle the various kind of product are included. |
|
| ... products without technical information |
| |
Corrosion Test Apparatus for Salt Spray Tests, Model 606
For tests in accordance with all salt spray standards. Corrosion resisting test chamber with circular dome or rectangular chamber, of plastic construction. Special dimensions upon request. Operator friendly controls for up to 2 test chambers with volumes of 400 l, 1000 l and /or 2000 l. |
|
Alternatively to our salt spray tests bench top cabinets and HD-chest models we offer the most favourable "ECONOMY" chests with 600L and 1000 L chamber capacity. These models are especially designed pursuant to the requirements of salt spray tests according to ASTM B117, ASTM B368, BS 3900 ECCA T8 JIS 7253 DIN 50021 SS, ESS,CASS resp. ISO 9227.
The side- and front walls are made from polypropylene. Following the VLM prinicles the EC-chest model are as well furnished with a ECTFE coated stainless steel bottom. Compared to conventinal chests the EC-chambers show a considerably better heat conductivity. For this reason the chamber will be heated up evenly and rapidly. Moreover due to this benefit, EC-chests can also be used for high humidity tests with constant water condensation pursuant to ISO 6270-2 CH.
The EC-cabinets are furnished with a transparent cover with turnable locks at both sides with a "dry" seal made of silicon foam. Hence, there is not only a convenient cleaning or loading of the chamber with the specimens. More important: As the chamber is hermetically closed during the tests there is no risk of contamination of the lab by escaping salt mist. An air purge is a serial feature and has to be activated before the cover is opened.
|
|
Salt spray alternate climates Standard SC
For tests reproducible of corrosion, in conformity
with the national standards and international, such as DIN, NF, ISO, ASTM, DEF, MIL-STD, etc .....
|
|
Air and Fluid Tubing - Nylon:
PLH-NP-2 Tubing and Connections, Air and Fluid
PLH-NP-4 Tubing and Connections, Air and Fluid
Air Tubing - Polyethylene:
H-2338 Tubing and Connections, Air
H-2339 Tubing and Connections, Air
Nylon Tubing Connections:
PLH-1438-SS Stainless Steel Connections
PLH-1414-SS Stainless Steel Connections
PLH-1838-SS Stainless Steel Connections
PLH-1438-SG-SS Stainless Steel Spring Guard Connections
PLH-1414-SG-SS Stainless Steel Spring Guard Connections
Polyethylene Tubing Connections:
P-HC-4216 Connections for Tubing
HC-4615 Connections for Tubing
P-HC-4221 Connections for Tubing
P-HC-4728 Connections for Tubing
P-HC-4215 Connections for Tubing
Fluid Quick Detachable Connectors:
P-HC-4808-1 Fluid Quick Detachable Connectors
HC-513-1 Fluid Quick Detachable Connectors
QDL-4808 Fluid Quick Detachable Connectors |
|
Goodyear offers a range of premium quality spray hoses suitable for a variety of applications.
Visit our website below for a complete list of the hoses available |
|
Goodyear offers a range of premium quality spray hoses suitable for a variety of applications.
Visit our website below for a complete list of the hoses available |
|
... see all the products in the category
Hoses
|
| Airguard paint arrestor pads are inexpensive, replaceable filters designed to collect the solids in paint overspray. Overspray particles are trapped in the filter before reaching the exhaust stacks, thereby reducing fire hazards, reducing air pollution and preventing damage to surrounding properties. Select from fiber glass, expanded paper and polyester medias. |
|
Dry, robust sand blast cleaning room and compacts, with standard projection "overpressure", with dust extractor with integrated cartouche.
It offers a total volume thanks to its frontal opening opening on a scheme of work or in option on a revolving plate.
Useful volume: 1300 X 750 X 850 mm
It is the best report/ratio ecombrement total/useful volume of the market. |
|
Machine of projection of abrasives with wet process.
The water mixture + abrasive projected on the parts allows very soft treatments on fragile parts and associates the creation of surface quality with degreasing and cleaning. |
|
The JetSpray humidifier combines compressed air and water to produce fine sprays of moisture that immediately evaporate to raise the humidity to the desired level.
It can be fitted inside an AHU or duct, or directly in the space to be humidified.
The system requires very little energy to operate, has the lowest compressed air consumption of any similar system in the world and due to its self-cleaning nozzles requires very little maintenance. |
|
The Condair Fast Fog high-pressure humidifiers are applied for the humidification of supply - and re-circulated air in industrial, commercial and public buildings. Due to the high humidification efficiency the Condair Fast Fog is also used for adiabatic cooling of exhaust air in air conditioning systems.
|
|
|
|
see the results for the following category
