Switches

MEMS Optical Switch are based on a micro-electro-mechanical system(MEMS) technology. It is widely used in OXC, MCS, OLM, OTDR fiber sensing and so on. The components are small size, fast speed, good stability. Key Features Support ...

Primary current: 16 A
Voltage: 690, 220 V
Operating temperature: -20 °C - 60 °C

... pole OFF switch or changeover switch Enclosure made of optical fibre reinforced polyester resin Degree of protection IP66 according to IEC/EN 60529 Clear position indicator 0/1 or ON/OFF Functional ...

Primary current: 0.5 A - 1.2 A
Voltage: 2.7 V - 5.5 V

Low-resistance power load switches offer reliable overcurrent and thermal protection. They are designed for general-purpose power protection or for applications such as USB, hot-swap and power distribution. The power ...

Voltage: 3.3 V
Operating temperature: -40 °C - 85 °C

Fractional-N synthesizer with low phase noise VCO K band quadrature demodulator Programmable via 4-wire SPI RF operating frequency range: 17 GHz to 22 GHz LO internal frequency range: 17 GHz to 21.5 GHz Double sideband noise figure: ...

Voltage: 2, 15 V
Diameter / length: 6 mm
Operating temperature: -40 °C - 90 °C

... Sharp feeling and silent by metal dome and rubber dome Typical Applications 1.Operating switches for car electronic equipment, car audio systems, etc. 2.Steering switches

Primary current: 8, 10, 15 A
Voltage: 28, 250, 125 V
Operating temperature: 0 °C - 85 °C

1500/2500 Series rocker switches are available as Midsize Non-Illuminated and Illuminated, and Hi-Lite Rocker with High Inrush. The 1500H/2500H High Inrush option is designed to handle high inrush currents up to 100A ...

... hazardous environmental conditions. The tactile switch is IP68. There is no soldering on the ceramic Piezo element and the switch is tested for over 50 Million activation's. There are no moving parts ...

Primary current: 10 mA - 5,000 mA
Voltage: 12 V - 24 V
Operating temperature: -40 °C - 150 °C

... and angular movement Standard NC, optional NO switch output Industry standard AMP superseal connector IP69K protection class Applications Mechanical switches are used in commercial ...

WM-547 Rotary Hand Controls are designed for a variety of off-highway applications. It is infinitely variable between 0° and 90° with applicable uses that include engine RPM, chassis module inputs and hydraulic pump control. The Rotary ...

Primary current: 3, 0.5 A
Voltage: 125 V

Double pole single throw switch Stainless steel face plate The Edwards 6537 pull cord switch provides emergency call activation. The call may be reset at the initiating switch. Cords ...

Operating temperature: -40 °C - 70 °C
Width: 24 mm
Height: 24 mm

2 POSITIONS Stay Put 2 Positions (1-2), Stay Put Spring Return 2 Positions (1-2), Spring Return (2 to 1) 3 POSITIONS Stay Put 3 Positions (1-0-2), Stay Put Spring Return 3 Positions (1-0-2), Spring Return (to 0) Spring ...

Voltage: 24, 12 V

... which monitored function failed leading to the alarm or shutdown magnetic switches do not. Magnetic switches operate basically as a latching relay. Application Magnetic switches ...

Primary current: 12 A
Voltage: 690 V

Measuring 3-phase switches 48x48mm Ammetric switches, 3 currents Voltmetric switches, 3 linked voltages Voltmetric switches, 3 linked voltages + 3 phase voltages lt allows to use only one meter to measure, by scanning, ...

Primary current: 16 A - 40 A

Rotary cam switch GX series, ON-OFF switch 3 poles 16A, for front mounting with red/yellow handle padlockable in 0 and protection covers, front plate 48X48mm •Type of product: ON/OFF switches •Switching ...

Every electric switch onboard has to meet the highest demands. Mastervolt offers a wide choice of stylish, waterproof switches for a range of onboard functions. All fully waterproof switches ...

Primary current: 120, 90, 200, 250 mA
Voltage: 24, 28, 12, 15 V

The CCR - 40K / CR-40K coaxial switch with characteristic impedance of 50 Ohms incorporate 2.92 mm high performance connectors. These are broadband, SPDT, electromechanical switches specifically designed ...

Product introduction It’s applied to M-part, GLOBAL-ACB circuit breaker.

Primary current: 10 A - 20 A
Voltage: 125 V - 480 V

... General Purpose, 1 SP/DT Switch TA-2: General Purpose, 2 SP/DT Switches TA-5: General Purpose, 2 DP/DT Switches TA-1X: Explosion Proof, 1 SP/DT Switch TA-2X: Explosion ...

Primary current: 10 mA
Voltage: 28 V
Operating temperature: -55 °C - 125 °C

The B1 series basic switches are ultra-subminiature in size, designed to reliably switch logic level signals as well as up to 2 amps switching capacity for a minimum of 25,000 cycles. Mechanical life ...

Voltage: 3 V

Fit for sun-blinds and awnings. Frequency: 433.92 MHz. Range: Up to 200m (Open-field)

Voltage: 10 V - 30 V

Series 1750 Solid State switches are available for use on most Tom Thumb and PHD products for simple interfacing to many types of electrical controllers. These switches are offered in 10-30 VDC current ...

Primary current: 0.25 A - 16 A
Voltage: 24 V - 690 V

Protection degree: IP65 Operating temperature according to the reference standard: -25°C+70°C IK degree at 20°C: IK05 - IK09 Material: Engineering plastic EN 60947-5-1 Low-voltage switchgear and controlgear Part 5-1: control circuit ...

Primary current: 10 A
Voltage: 30 V

The Camlock All Brass 7-Pin Octagon Radial Pin Tumbler S28 is utilizable for applications such as smooth key controlled switching is needed, having the extra advantage of being able to make part of a expanded keyed similar system by this ...

A big 'Rotate to Set' special needs switch featuring a unique patented variable pressure mechanism with diameter 127mm. Simply rotate the coloured top to increase or decrease the actuation force required. Use on a tabletop ...

Primary current: 170 mA - 450 mA
Voltage: 24 V - 28 V

Single pole, miniaturised aircraft simulator switch with extremely fast magnetic trip time. Blade, screw and wire wrap terminals. Aircraft style threadneck and push/pull button with white trip indicator ring. Current ...