|
|
19-inch CompactPCI Switch-mode Power Supplies
Multiple Output 75 - 200 watts
High performance CPCI-Power Supplies for your application.
|
|
1U PSU
Model ORION-A1501
150W 1U ATX power supply with active PFC
Model ORION-A4001
400W 1U ATX power supply with active PFC
2U PSU
Model ORION-B4001
400W 2U ATX power supply with active PFC
Model ORION-B3501P
300W 2U ATX power supply with active PFC
PS/2 PSU
Model ORION-D5601P
560W PS/2 ATX power supply with active PFC
Model ORION-D3501P
350W ATX power supply with active PFC
|
|
|
|
|
|
Application
The switch-mode power supplies are powerful and robust devices to power sensitive loads in a hard industrial environment. These features result from the modern construction with a good radio shielding and high reliability integrated in a functional and stable casing. The short circuit proof output DC voltage of this type can be adjusted. This power supply is optimally suited for loads requiring high starting currents.
Product information
Switch-mode controller with low residual ripple
Overload- and open circuit protected
Short circuit proof
Output separated according to VDE 0551
Smoothed output
Operating status shown by LED
Parallel connection possible
Suitable for the tropics - epoxy resin casted
Safety acc. to VDE, EN, UL, CSA
Technical data
Input voltage (VAC): 85 ... 270 / 320 ... 550 VAC
Input voltage (VDC): 120 ... 400 / 450 ... 780 VDC
Output voltage: 5 ... 130 VDC
Output current: 0,5 ... 50,0 A
Power: 12 ... 1200 Watt
Operating temperature range: -40°C / +80°C
Mounting: on rails acc. to DIN 46277 or wall mounting with screws
|
|
|
|
|
|
Switched-mode power supplies SN3 - the ideal power supplier for your 24 V DC PLCs
The switched-mode power supply unit is indispensable in the fields of power engineering and automation. The technology features a high efficiency and the development of heat and power losses are thus kept to a minimum.
The wide input voltage range which accepts both AC and DC power supplies guarantees world-wide use, even with fluctuating power networks and battery operated systems.
The new devices feature integrated performance reserves of up to 50 %; which avoid the necessity for over-dimensioning with high starting loads. They are also no-load and overload protected and feature permanent short-circuit proofing.
Devices with adjustable output voltage, e.g. for compensation of voltage drops on long cable lengths enable matching to the demands of different applications.
An additional annunciation module which can be retrofitted with a remote function for external switch on and off, as well as a relay output for indicating that the input/output is ok, optimise the monitoring features of the control.
|
|
Features
- Output Modify Range:3V~200VDC
- Redundant Function (HOT SWAP)
- Alarm Signal (RDY) Exposition Details
- RDY Signal Wirigin Diagram Circuit
- Standard / Din Rail Dual Purpose Details
- Accessories Mounting Guide
- RoHS Report
- ISO 9001:2000 TUV Certification
- Part Number Rule
- Split rail, Series, and Parallel, Redundant use, and Remote sensor connection circuit
|
|
Features:
- Standard/ DIN Rail Mounting Dual purpose
- Convection Cooled
- input/ output LED indicator
- 100% burn in test
- MOSFET designed
- 1 yar warranty
|
|
|
The successful PowerVision range has been extended. From the 4th quarter, you will also receive single-phase stabilised switch mode power supplies with a rated output current of 2.5, 5, 10 and 20 A respectively. The three-phase economy switch mode power supplies can now also be supplied with isolated DC OK signal output and active inrush current limiting as an option. The range of uninterruptible power supplies has also been extended with a buffer module and an accumulator module.
|
|
Switching Power Supplies
Delta's switching power supplies provide power ranging up to 7,200W+ per power module, with efficiency of over 90% and power density of up to 25W/inch3. These products are modular, redundant, hot swappable, and provide universal input power systems for high reliability. Delta offers custom design and high volume manufacturing capability of power supplies for PCs, servers, workstations, networking, peripherals and office equipment.
Delta's switching power supplies use state-of-the-art circuits and advanced packaging technologies such as ASIC, hybrid circuits, and thin film to achieve high efficiencies and power densities.
|
|
25 Watt Single and Multiple Output
Features:
- 3.6”x 2.48” Footprint
- Low Cost
- Low Profile fits 1U Height Requirement
- Over Voltage and Short Circuit Protection
- Class B Conducted EMI
Applications:
- Networking
- Peripherals and Terminals
- Compact Equipment
- Microcomputers
Mechanical Characteristics:
- Length: 91.5mm (3.6inch)
- Height: 29mm (1.14in)
- Width: 63mm (2.48inch)
- Weight: 150gm (5.33oz.)
|
|
EASYMOD OPEN-FRAME SWITCHERS - 40W to 350W
AC INPUT & DC INPUT AVAILABLE
INDUSTRIAL, TELECOM & MEDICAL APPROVED
IF YOU CAN NEVER GET WHAT YOU WANT IN A SWITCHING POWER SUPPLY, the POWER SOLUTION for up to 350 watts steady state of high reliability, Universal AC input and DC input power can be found in the EASYMODfamily of switchers. These units are available in a complete range of single to quad output configurations from 1.5 to >48 VDC with power ratings from 40W to 350W.
Any Output Voltage from 1.5V to 48VDC
AC Input and DC Input Models
Approvals to cUL60950-1, EN60950-1 CB
Medical Approvals to cUL60601-1, EN60601-1 CB
Single and Multiple Output
|
|
• Energy Star, CEC & EISA Compliant
• ITE Approvals
• PCB Mount
• Class II Construction
• Compact Dimensions
• EN55022 Class B Emissions
• Low Cost
|
|
1U High, Up to 450 Watts with PFC and Hot-Swap Provision
FEATURES
- Includes Isolated 5V, ¼A Standby Output
- Hot-Swap Operation
- 12, 24 or 48VDC Outputs
- I2C Serial Data Bus Option
- Integral LED Status Indicators
- Up to 5.6 Watts/Cubic Inch
- Power Factor Corrected
- Low Profile: 1.6 Inches (41mm) High
- Single Hot-Swappable Connector
- Staged Pin Engagement
- ORing Diodes on Output
- 1U, 19" Racks Hold 2 or 3 Units*
- Active Current Sharing
- Universal 85 to 264VAC Input
- Class B EMI Input Filter
- Optimized Thermal Management
- No Minimum Load
- Control & Monitoring Features
- Front-End Switcher - PCG & TPCG
- SEMI F47 Compliant at Hi-Line
|
|
|
With efficient, state-of-the-art serial switchmode rectifier technology and streamlined system control and monitoring, the high performance GPS 4848/100 is the first choice to meet the demanding dc power requirements of large central office applications. This 48V Power System provides output capacities from up to 3080A in a single cabinet, to 14,000A with up to 64 200A/220A rectifiers in an integrated, multi-cabinet configuration, using either centralized or distributed system architectures. Available configurations operate on commercial 208 to 240, or 380 to 480Vac, three-phase, 50 or 60Hz, and provide the wide range of ac input, and dc output distribution options available for GPS systems. The system also incorporates the detailed system status monitoring and flexible control of the full-feature Galaxy Millennium II or the Galaxy SC Controller.
|
|
|
REO build a range of variable output DC power supplies that operate on the switch mode principle. The variable output is produced by high speed switching of the mains supply, after rectification, using IGBT's and controlling the mark space ratio. The DC level is reduced to the required output range by employing REO high-frequency transformers. Smoothing components, also manufactured by REO, are used to give a steady, ripple free DC supply.
|
|
- Universal Input 85-264 AC, 120-370 DC
- Short Circuit Protection
- Over current protection
- Over heating protection
- Over charge protection
- Output Led Display
- EMC standarts compatible
- CE, UL agreement
- Small dimensions
- 2 years guarantee
|
|
Regulated switch mode power supplies from 0.3 to 40 A for industrial applications
Description
Modular and optimum power supplies for networks single-phase 100-240 V
Output voltage: 5, 12, 24, 48 V -7 W-145 W
Highly compact sizev
Wide voltage range
Fixing by screw or on omega rail
Universal power supplies, for networks single/3-phase 100-500 V
Output voltage: 24 V and 5 to 15 V by converter modules 48 V/72 W-960 W
Integrated energy reserve
6 product references from 3 A to 40 A
Fixing on omega rail
Advanced diagnostics by LED and relay contact
Integrated anti-harmonics filter
Function modules to respond to problems of network cuts, 24 VDC circuit overloads and availability
|
|
Wall plug adapter
- Safety transformers
- Power max: Dc 6 VA
- Inlet with plug EUR,USA, UK, JPN, AUS
|
|
Desktop Switching power supply
Electrical caracteristics:
- Universal input: 90-264 Vac
- Single input: 230 Vac
- Frequency: 47.63 hz
- Output: Single or multiple voltage
- Efficiency > 70 %
- Working temperature: 0-40 C
- Storage Temperature: 0-70 C
|
|
Low Power Switchers – Up to 250 watts
The switch mode power supplies in this category span a large power range – from 7 watts to 250 watts. Many models available in open frame, rack mount or enclosed. Most product families are available for commercial and medical applications. Most families conform to industry standard footprints to optimize size and space constraints.
|
|
* AC-DC external power supplies from 6-200 watts (coming in 07)
* Affordable, compact, high performance solutions that can be modified to meet unique OEM requirements
* Full offering from 6 to 70 watts that meets EPA’s Energy Star requirements for external power supplies
* Suitable for a wide range of applications in communications (telephony and networking), industrial, computer/computer peripherals and testing/instrumentation.
|
|
* AC-DC external power supplies from 6-200 watts (coming in 07)
* Affordable, compact, high performance solutions that can be modified to meet unique OEM requirements
* Full offering from 6 to 70 watts that meets EPA’s Energy Star requirements for external power supplies
* Suitable for a wide range of applications in communications (telephony and networking), industrial, computer/computer peripherals and testing/instrumentation.
|
|
Linear Power Supplies – 6 watts to 288 watts
Choose from a wide array of options: single, dual or triple output; 6 watts to 288 watts. Worldwide input ranges and industry standard packages available.
|
|
* AC-DC external power supplies from 6-200 watts (coming in 07)
* Affordable, compact, high performance solutions that can be modified to meet unique OEM requirements
* Full offering from 6 to 70 watts that meets EPA’s Energy Star requirements for external power supplies
* Suitable for a wide range of applications in communications (telephony and networking), industrial, computer/computer peripherals and testing/instrumentation.
|
|
|
Power supplies: stabilized power supplies, food with cutting, food industrial, rectified food filtered, food rail DIN, food to measure, food hooded, etc
|
|
Features:
- UL-recognition (in preparation) marking for worldwide
applications.
- Designed for power ratings from 120 to 960 W.
|
|
| ... products without technical information |
| |
|
|
