|
|
mGard is the premier range of modular robust trapped key interlocks for heavy duty applications. Trapped key interlocking is a tried and tested method of mechanically safeguarding dangerous machines and hazardous processes, and is suitable for category 4 (EN 954-1) applications. It is called "Trapped Key" as it works by releasing and trapping keys in a predetermined sequence. After the control or power has been isolated, a key is released that can be used to grant access to individual or multiple doors.
The principles of trapped key technology apply to all industries where it is essential that all energy sources are isolated before gaining access to machinery. Almost all safety issues can simply be solved by selecting the required products in the following order
- Power/Control isolation
- Key exchange units
- Door locks & actuators
Benefits of mGard
- No wiring on the installation
- Pattented runner bar system
- Pure mechanical configurations can be used in ATEX zones 1,2
- Create pre-determined safety procedures
- Designed for use in harsh environments (dust moisture and vibration)
- Robust heads and actuators and handles (with missallignment) |
|
AZM range solenoid interlocks, operating in combination with control elements of a machine, e.g. fail-safe standstill monitors or fail-safe delay timers, ensure that sliding, hinged and removable guarding devices, such as grids , hoods or doors, cannot be opened until hazardous conditions (e.g. running-down movements) have come to an end.
These solenoid interlocks are also used for cases in which the opening of a guarding device represents a non-permissible intrusion in a production process.
In combination with AES and AZR range safety monitoring modules, the AZM range solenoid interlocks achieve Control Category 3 or 4 to EN 954-1, subject to suitable circuit arrangements. Examples of circuits for solenoid interlocks are shown in the Schmersal Control Circuit and Applications Handbook.
Schmersal make both standard and AS-i Safety at Work solenoid interlocks.
Click here to see the AS-i models
Or for the standard models click below
|
|
The NX range permits a module selection which includes at the same time mechanical interlocking systems so that it turns into one single element.
The NX range is a versatile and modular system for machinery guarding applications. The NX range is composed of mechanical bolt locks with modules like herses for padlock or electrical contact of security, and accessories from different latches type.
The principle of key release and locking is directly integrated in the interlocking system.
The NX range is completely evolving and can be tailored for any application due to its modular configuration. NX is also easily adapted to changing circumstances. As regulations or procedures change, modules can be removed and new features can be simply added to the unit. This range is totally suitable with security norms in force which always are becoming stronger.
The different components of the NX range are completely built in stainless steel so that they can give a perfect resistance to harsh environments. Fields of application are diverse: concrete, chemistry, energy, electric, etc…
In order to respond to the requirements of the industry branch, Serv Trayvou has developed the NX-range whose system is modular and very heavy duty.
Through this range STI proves all its expertise and technical know-how which place the company as a specialist in safety devices for hazardous machines. |
|
LOCKABLE SWITCH in a box with 1 to 3 key slots from 5 to 215 KW
Mechanical or electromechanical blockage of power circuits in the open position.
It has one blocking or interlocking latch that can release from 1 to 3 keys.
Protection: IP 55
Options: ADF; 4 poles - 6 poles; Timer; Blockage in the open position; Advance action auxiliary contacts upon request. |
|
RTK*E
* From 1 to 6 key slots
- Without contacts, this rotating lock is used to block circuit breakers, differential circuit breakers, accesses, ...
-Equipped with contacts permits blocking of command circuits (2O-2F) or power circuits (3O-1F up to 22KW)
- There are various versions available based on the application needs
Positive safety: Opening of the circuit by extraction related to the handling of the key.
Key logic:
%u2022 Without contacts, cam action
%u2022 1 Key: Held Key, 2 contacts
open, 2 contacts closed
%u2022 Various keys: Associative functioning ( )
%u2022 Various keys: Interchange functioning ( / ) (A keys free, B keys held) |
|
Magsafe is Smartscan’s latest innovation in machine safety. An electro-magnetic interlocking system for controlling personnel access through the gates and doors set within the perimeter safety fencing or screens surrounding potentially hazardous machinery.
The key design element in Magsafe was to lock the door using magnetic force rather than by mechanical means and to remove the problems that plague existing gate locks due to liquid and dirt exposure in combination with the rigors of daily operation. This causes fatigue and leads to mechanical failure of the product. The ability to withstand harsh industrial environments such as water, dust and corrosive liquids Magsafe is the perfect solution for most guard locking applications.
In addition to this Smartscan has applied its safety light curtain technology background to the safety gate interlocking market by providing a system control unit which continuously monitors the on and off state of the magnets. This ensures the system detects when the gate is open and when it is closed. Only when the gate is closed and the magnetic locking force applied, will the control system allow machine operation. |
|
Designed to control access to the dangerous or protected areas, this device is installed in any kind of door, gate, housing, and permits remote unlocking from a distance.
Equipped with a forced opening contact, it permits the detection when the access is closed again. |
|
Doorholder Magnets, explosion proof
Doorholder magnets with 650N, 1300 and 200N force, explosionproof, in acc. with ATEX 94/9/EG, II2G EEx m II T6, II2D IP66 T85, for use in hazardous areas zone 1, 2, 21 and 22 for all kind of gas, mixtures, vapours and dust (in acc. to type). Protection class IP65 |
|
DICTATOR provides complete hold open systems for hazardous areas
They comprise explosion-proof smoke and heat detectors, door operators and the electromagnets. They comply with the requirements for group II products and can be installed in all zone 1 and 2 areas (according to VDE 0165). The explosion proof magnets are encapsulated (EEX m). Two series are available: with ex-proof connection box or with connection cable. The standard length of the cable is 2 m, but it can be delivered in the length required on site. The holding force of the magnets is either 550 N or 145N. The integrated release pin eliminates any remanence after switching off the power supply of the magnets, ensuring that the magnets always releases the door. All ex-proof magnets are equipped with diodes and polarity protection.
The DICTATOR ex-proof magnets have been tested both according to EN 1155:2005 for hold-open systems and the ATEX directive by the Physikalisch-Technische Bundesanstalt Braunschweig (certificates PTB 03 ATEX 2174 X and PTB 03 ATEX N060).
In addition to the ex-proof magnets DICTATOR also provides a large range of electromagnets for hold-open systems, that comply with the EN 1155:2005 and are approved for the use in hold-open systems. |
|
DESCRIPTION AND OPERATION
Gone up on a fixed part, these suction cups ensure
the magnetic maintenance of the doors by l’ intermediary
d’ a reinforcing plate.
The release is obtained:
by electric drive remotely
cut of the tension d’ food for
models with lack of tension
powering for the models
with emission of current
manually by l’ intermediary d’ a button
push rod (models with lack of tension).
The return to the position “ maintien” s’ obtains in
bringing back the door in the initial position. |
|
| ... products without technical information |
| |
| Mencom Corporation is a worldwide supplier of DIN Solenoid Valve Connectors. Product line includes over molded connectors, field wireable connectors, and quick disconnect connectors in form A, form B, Industry Standard form B, form C, and Industry Standard form C. |
|
| The pre-wired and overmolded mPm valve Junior Timer connectors offer an economical alternative to hard wiring and mate with industry standard Junior Timer connector interfaces on solenoids and other mobile hydraulics devices and other harsh environment applications. The Junior Timer connectors are also available with surge suppression circuitry that extends the life of the coil and control circuitry. LED indication is built into the connector head for easy identification of system status. With an IP65 environmental rating, the Junior Timer provides protection in harsh and demanding environments. Plus the cable locking clip protects the connection in high vibration applications. |
|
| The line of mPm DIN connectors is designed to reduce the number of components making them easier to assemble and with fewer parts to stock. They provide repeatable, unsurpassed IP67 sealing performance using an external nut over the cable. Traditional Form A and B connectors require three different styles for PG07, PG09 and PG11. However the external nut accepts a wider range of cables from 4mm to 9mm, reducing the number of parts from 3 to 1. The new generation of DIN connectors is available in our complete range of field attachable sizes including Form A, B and C. |
|
Features:
- correct pole faces
- milled grooves
- careful machining of the sealing elements where required
- sealing elements
- aeration bore in the groove
- number of grooves a - 3 cost neutral
- also when the groove is on the face all passages without burr |
|
Features:
- correct pole faces
- milled grooves
- careful machining of the sealing elements where required
- sealing elements
- aeration bore in the groove
- number of grooves a - 3 cost neutral
- also when the groove is on the face all passages without burr |
|
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
Material generally linked to a fire system which will automatically release the fire doors in case of a fire, by switching the power off.
Electromagnetic holder mounted in a metallic box painted with white epoxy, with cabled local release button, protection level IP42, delivered with an equipped magnetic pin |
|
DICTATOR manufactures electromagnets tested and approved according to the EN 1155:2005.
An extensive product range of electromagnets and counter plates
covering most applications.
Holding forces up to 5000N
Voltage: Standard 24 VDC, other tensions also possible
Special designs
- Ex-proof magnets
- IP65
- Magnets with UV-resistant sealing resin for outside applications
- Magnets to be integrated in overhead door closers
- Customized designs
|
|
Electromagnet is a type of magnet in which the magnetic field is produced by the flow of an electric current through the coil. The magnetic field disappears when the current ceases.
As a current is passed through the coil, small magnetic regions within the material, called magnetic domains, align with the applied field, causing the magnetic field strength to increase. As the current is increased, all of the domains eventually become aligned, a condition called saturation.
The main advantage of an electromagnet over a permanent magnet is that the magnetic field can be rapidly manipulated over a wide range by controlling the amount of electric current. However, a continuous supply of electrical energy is required to maintain the field.
In applications where a variable magnetic field is not required, permanent magnets are generally superior. Additionally, permanent magnets can be manufactured to produce stronger fields than electromagnets of similar size.
Electromagnets are used in many situations where a rapidly or easily variable magnetic field is desired. Many of these applications involve deflection of charged particle beams; the cathode ray tube and mass spectrometer fall into this category.
Popular uses: linear motor, electric motor, circuit-breakers, electromagnet brakes, electromagnet clutches, metal lifter, magnetic separators, and more. |
|
These industrial holding magnets are units with an electromagnetic
holding system without an armature that is an open magnetic
circle for the holding of ferro magnetic parts.
The greatest holding force is dependant on the surface roughness
and component thickness.
Devices with permanent magnets and rectangular holding magnets are also available.
Size: 15 - 250 mm diameter
Max. holding force: 36 - 30000 N
(please note catalogue indications)
Rated torque: 1.4 - 90 W |
|
... see all the products in the category
Magnets
|
|
|
