|
|
The XLe compact (96x96x57) all-in-one controller comes with a 128x64 LC-Display and has full monochrome graphics capabilities. It is equipped with built-in I/O coupled with the dual protocol capabilities and optional internal telecommunication modules.
The OCS with its full IEC61131-3 integrated development environment for logic, HMI design, networking and I/O configuration is a very capable PLC with full graphics capability. The operator interface used in the XLe series is a high visibility graphics monchrome LC-Display with blue LED backlight offering excellent readability to the user in the most difficult conditions.
~ Cscape™: All Units are programmable with a Free Software ~
|
|
Microvision Plus (3 axis interpolated controller)
All the power of a numeric controller with ISO programming in a cheap structure based on a RISC 16 bit processor. Monochromatic 5” display can be touch screen which improves navigation making it more user friendly. Drivers can be connected to the controller either through analog +/-10 V. signals or digital PWM or Step / Direction. Besides a considerable number of I/O “on board” many other devices can be added or remoted using the 2 available CANopen serial ports.
|
|
Control unit unipos C110:
- linear path controller
- CNC + PLC
- controls max. 9 axes, servo motors or stepper motors
- DC motors on request
Control unit Unipos 120 / 220:
- Point to point controller
- Control unit to control stepper motors
- CNC
Control unit unipos 420-W:
- continuous path controller
- CNC + PLC
- Controls max. 8 axes, 4 axes simultaneous
Control unit unipos 820-W-/WH:
- CNC-Controls + PLC
- max. 64 axes with 8 NC-channels (SERCOS/Analog)
|
|
From the monitoring-for-function of the sensors to self-monitoring Control Units, Mayser supplies the right Control Unit for every safety system. Acting as a link between the sensor and the machine control, it analyses the incoming signals and immediately triggers the required measures.
In cooperation with the Elge GmbH company, we can also supply Control Units for special safety systems and other applications.
|
|
An electronic device that assists the control of a vehicle's engine management system and transmission management system by instantaneously measuring multiple events enabling "real time" adjustments of fuel, air, spark and gear shift to help the powertrain operate efficiently, reliably, and economically.
The Delphi MT86 Powertrain Control Module (PCM) features an up-integrated design that reduces weight and wiring. Its small package size enables passenger compartment mounting. Its robust design enables under hood mounting. Its flash programming provides in-vehicle memory updates.
The MT86 PCM is designed to support most 6-cylinder port fuel injection gasoline and up to 6-speed automatic transmission programs.
Delphi also offers engine control modules (ECM) for 4-cylinder gasoline port fuel injection engines; light duty, medium duty and heavy duty diesel engines; and small (1- and 2-cylinder) gasoline engines.
|
|
An electronic device that assists in the control of automatic transmissions to help them operate more efficiently and more reliably. It is a low cost module designed for under hood or passenger compartment mounting. It is suitable for most 4-, 5- and 6-speed transmission programs. It can also be used to support clutch-to-clutch and free-wheeling transmission programs.
The Delphi TCM8.1 Transmission Control Module has features that can help vehicle manufacturers meet demanding performance targets, higher level fuel economy requirements and very stringent emissions regulations.
|
|
ELECTRONIC CONTROL FEATURES
100% duty cycle
Superior Accuracy (1/2% over full range)
Compact electronic and mechanical design
No clutches or brakes
Multiple size plunger / flow capability
Severe duty design standard
Local micrometer stroke indication
Split signal capacity (standard, field adjustable)
Direct or reverse acting (standard, field adjustable)
Each side can operate independently or in unison
Adjustable feedback signal to tune output
Low maintenance
No overshoot or hunting
Wall and panel mount remote controllers (w/indication) available
|
|
Combustion Control and Monitoring Systems
Combustion and emission control, why?
In 1997 with the Kyoto's Conference and its regulations, the Governments decided to pay more attention to the CO2 flue gases reduction.
The European target for CO2 reduction is 8% compared to the year 1990 values.
Ascon is one of the leaders of this new conscience of environmental effects, managing, energy and financial saving.
Four guide lines have been defined: energetic renewable resources , diffusion of implementations to improve the final energy use, electrical energy production, and urban road traffic reduction.
One of the most important steps is to improve the plants efficiency by means of the continuous control of the flue gases oxygen content.
This type of control enables:
combustion efficiency optimisation by means of the control of the air/fuel ratio (energy saving);
check of correct plant working under different operating conditions, simple identification of possible anomalies and then relevant corrections (safety);
reduction of Nitrogen oxide pollution (to reduce environment impact).
Remember, a correct combustion means: economy, safety, cleaning.
Clean Combustion = Energy and money saving
At present each moderate investment on this matter enables a considerable energy saving with the consequent money surplus which means a quick pay-back of the investment and more.
|
|
For Maximum Combustion Efficiency Through Complete Mixing Of Fuel Gas And Air.
Selas Combustion Controllers equipped with PosiMix® Mixing Valves are precision premix systems for blending fuel gas and air. They are suitable for most fuels, mixing them with room air and compressing the mixture to deliver a precise, preset gas/air ratio at uniform pressure to the burners.
FEATURES & BENEFITS
Completely self-contained
Capacities available from 500 to over 150,000 cfh of mixture
Output pressure to 6 psi
Precise gas/air ratio maintained over a wide turndown
Available with automatic ratio control
Low installation cost - single pipe delivery system for one or more control zones
For use with any clean commercial fuel gas containing less than 40% hydrogen
Rugged - provides years of trouble-free operation
Low maintenance
|
|
Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback Modes for DC Welders
-Graphical Display and Intuitive DC Welder Monitoring
The UB25 linear DC welder provides unsurpassed levels of control for micro-miniature resistance welding. This DC welder power supply should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback Modes for DC Welders
-Graphical Display and Intuitive DC Welder Monitoring
The UB25 linear DC welder provides unsurpassed levels of control for micro-miniature resistance welding. This DC welder power supply should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
Libratherm offers ready to use control panel for electrical furnaces, ovens or any other electrical heating system, which can be used by the OEMs or the end users. The panels are fabricated as per the auto-cad drawing using the high grade steel and are duly powder coated. The size, volume and the air circulation arrangement of the panel is chosen as per the requirement. Depending upon the requirement and application of heating system and desired degree of temperature accuracy the temperature controllers, controlling method and the end controlling device is selected. The panels can be supplied for single phase load or three phase load.
The main controllers can be simple On/Off controllers (model DTC-300, DTC-720) or more precise single or multi loop PID controllers (model PID-300, PID-966, PID-723 or PID-8000) or the single or multi zone Ramp/Soak profile programmers (model PRC-300, PRC-309, PRC-8000 etc…) The parallel safety controllers can be selected as model DTC-300 or linearized controller model DLC-301.
The final controlling device can be a suitably rated electromechanical contactor or solid state relays for single and three phase load. For larger capacity heating systems requiring precise control, thyristor power controllers (either phase angle controlled or burst firing control) are incorporated, having single phase, two phase or three phase star/delta load configuration. The suitably rated heavy duty terminals or bus bars are provided for heater and power line connections. The load connections are isolated using the suitable contactors in series to isolate the heating system during maintenance of the panel or the heater load.
|
|
No matter what the application, Draeger's System Centers will design a monitoring system for your specific needs.
Whether it is a single wall mount unit for only one or a few points, a 19" rack mounted modular controller, or a full blown SCADA system with cabinetts to house the electronics and wiring, our experienced engineers will help to design the system that fits. Even PC monitoring consoles with event log displays and zoom-in plant layouts are available from Draeger Safety.
|
|
Acting as the nerve center of a modular gas detection network, the Vulcain 301C provides continuous monitoring of up to 96 inputs/outputs, on 3 distinct channels, at distances of up to 2000 feet.
Once installed, this highly customizable and powerful tool provides around the clock protection identifying hazards and triggering appropriate reactive measures such as ventilation activation.
|
|
Electronic controllers are designed for electric motor drives
based on the battery supplied asynchronous motors, electronicaly commutated brushless motors with permanent magnets and DC commutator motors. They are designed for use in various
drive systems. They are built in the MOSFET technology. Their
method of operation is adapted to the operation with various
types of motors. Controllers are designed on the basis of
processors; therefore a wide setting of functions is possible.
They are built for the nominal voltages from 12 V to 80 V
and control of load currents up to 800 A.
|
|
|
The CVC electronic controller has been designed as control system for hydrostatic tracks vehicles with separate - left and right - hydraulic circuit. The CVC controls in closed loop the displacement of the two pumps, or the speed of the two wheels, to make sure that it corresponds to the given command in whatever use conditions.
|
|
Fan Controller Features
Designed and manufactured in the UK specifically for our full range of fans, these controllers incorporate
state of the art electronics to ensure efficient and problem free operation.
Features
- AC variable frequency drive - Internal class B industrial RFI filter
- Door interlocking mains isolator - Start/stop switch
- Speed potentiometer - Cooling fan & filter
- CE marked and manufactured - Available in 230V single phase or 415V 3 phase AC
to BS EN 60204 - Internal circuit protection for VFD and cooling fan
Options
- Stainless steel enclosure - Fire alarm interlock (electrical)
- Emergency stop relay - Door mounted drive keypad
- Output chokes for long cable runs - Digital speed display
Please note this represents the standard “off the shelf” controller. Custom panels housing multiple drives,
specific VFD’s to your site standard (i.e. Siemens, Allen Bradley, SSD/Eurotherm, Lenze, Mitsubishi, Toshiba,
Hitachi, Yasakawa/Omron) can be manufactured to suit your requirements.
|
|
Switches and controllers
with integrated motor protection
switches: 1-, 2-, 3-step
Control unit:
transformer
5-step and stepless, electronic stepless
Regulated by:
stepless, temperature-, pressure-, humidity-, air velocity
Electronic Control Units
Electronic control units for stepless speed control of voltage-controlled 1- or 3-phase fans. The devices are available in various ratings and formats. Rosenberg offers electronic control units with manual speed selection as well as devices for simple control applications (temperature-pressure control).
|
|
|
The Waukesha Engine System Manager (ESM) is a total engine management system designed to optimize engine performance and maximize uptime. The ESM integrates spark timing control, speed governing, detonation detection, start-stop control, diagnostic tools, fault logging and engine safeties.
|
|
BODAS controllers for quickly and affordably creating a mobile-hydraulic complete solution without time-consuming and expensive hardware development.
The RC controllers are the heart of the BODAS system with multifunctional inputs and outputs for the control of the electrohydraulics components in the machine. BODAS RC controllers are optimally meeting the requirements of mobile working machines with a diversified application spectrum.
In complex applications, multiple controllers can be connected via the CAN bus to form a network. The number of the inputs and outputs can be extended quickly and economically with the CAN I/O-extension module RCE. Safety features integrated in the standard version enable simple and reliable machine diagnostics.
Matched to the RC controllers, the BODAS software modules offer preconfigured application solutions for drive and working hydraulics. A comprehensive tool chain for parameterization, for diagnostics and for flashing the BODAS controllers is available with the BODAS-service.
For custom solutions, you can use the BODAS RC controllers as a freely programmable platform.
Features:
- Safety features:
-Detection of cable break
-Detection of short circuit
-Monitoring the outputs
-Bosch watchdog module
-Central switch for all power outputs
- Output stages with pulse-width-modulated current regulation (PWM)
- Robust case
- High EMC > 100 V/m
- Download the software from a PC to the flash memory
- CAN bus or RS232 interfaces
- Interfaces matched to Rexroth electrohydraulics
|
|
With BODAS, Rexroth supplies a suitable and unique system which meets all requirements for the electronic control of mobile equipment.
Modular Architecture
As a system, BODAS distinguishes itself with its consistent modular architecture with matched interfaces. As a result, it is very easy to integrate all components. Effective machine controls can, thus, be developed quickly and affordably. Existing solutions can easily be extended with additional functions. The optimal matching of the BODAS system to Rexroth hydraulics also increases the efficiency of the entire working machine.
The proven, freely programmable RC controllers are the heart of the BODAS hardware modules. Sensors, displays and joysticks round out the line of BODAS hardware modules. Thus, BODAS supplies all components for a complete electrohydraulic drive system from a single source. Complete solutions combining travel functions and working functions are optimally matched to one another.
|
|
|
ITC manufactures and sells a wide range of electronic equipments for dosing pumps control. From equipments that control the CI, RedOx, pH and EC to Fertigation Controllers with automatic pH regulation and the fertilizers in the irrigation water.
|
|
BL 931700 mini pH controller has been designed for easy, affordable installation in tight spaces to perform simple yet effective process control. As a result of its compact size, BL 931700 can be installed right next to tanks or vats.
This versatile controller is ideal for a wide variety of applications, such as textiles, papers, photographic solutions, plating baths, chemicals and water treatment.
BL 931700 is provided with a selectable setpoint for acid or basic dosage. Measurements are directly acquired from a pH electrode in the range from 0 to 14 with a 0.01 pH resolution. Accuracy is ensured by the 2 point calibration, performed manually through trimmers on the front panel. You can also choose automatic or manual dosing mode with a switch on front panel. Manual control is particularly useful during maintenance operations, because it permits you to enable or disable the dosing relay according to your need.
The overtime control system advises you when the relay is active too long, helping to prevent overdosing. In addition, this model features a 4-20 mA analog output for recorder connection.
Two models are available, with different power supply input at 115/230 Vac or 12 Vdc.
|
|
With MEROBEL’s new DGT300, Web Tension Control has never been so easy to manage.
The newest Digital Controller from MEROBEL combines, in a smart and low profile front face enclosure, the most simple user’s interface with the most advanced technical features.
Designed for both closed loop and open loop tension control, the DGT300 is the up-to-date turnkey solution for unwinding, rewinding and intermediate tension control applications.
Allowing 100% setting up through its user’s friendly Windows PC interface, or through its front panel keyboard, the DGT300 includes all the requested web tension control specific functions : E-stop, soft start, hold & release, taper tension, no-stop splice turrets. Analog set point input is also available for using distant remote control with PLC analog output or potentiometer.
Allowing direct input of position sensors, US sensors, or any kind of load cells technology signals, the DGT300 design gives the benefit of fully digital calibration procedure as simple as 1-2-3 (no switch, strap, or resistance).
|
|
Designed for precise closed loop tension control, the Spyder is capable of controlling web tension in unwind, rewind, point-to-point or dancer applications. It measures tension from one or more MAGPOWR load cells and outputs a corrective analog signal to control a torque device. Its reduced
size means it can be hidden away in an enclosure or underneath the machine.
With its ethernet connection, the Spyder can be viewed on a web browser for remote troubleshooting, programming and/or data collection. Additionally, the Spyder provides an analog input for Manual Level setpoint, control inputs for Run/Stop, Auto/Manual: Tension On/Off, and E-Stop, and a 0-1 mADC meter output proportional to measured tension.The Spyder is a cost effective, easy-to-use control capable of delivering advanced features such as adjustable taper tension to nearly any application...
|
|
From 1992, over 3000 MW.90.10 systems have been installed, solving numerous tension problems in conjunction with Load Cells, Dancing Rolls, or Sonar.
The real news, however, is that the Microprocessor MW.90.10 is the first system to allow open loop control of mixed systems using one common control. Load Cells and Sonar, Dancing Rolls and Sonar, and Load Cells with Tacho Generator.
The high standard of design ensures the function reliabiiity, repeatability, and precision of the Display values.
Personalised operating parameters are stored in the Microprocessor's memory, which can be recolled easily, speeding up machine changeovers and so increasing productivity. Easily calibrated, small in size yet high in quality and performance, the MW.90.10 offers excellent value.
|
|
The components presented here have been developed and optimised for increased requirements in close co-operation with our customers over a period of several years. ifm electronic now supplies a sophisticated control and automation system which conforms to the needs of the market. In addition to flexibility and performance attention was given to the following points:
> Operation at extremes of temperature, both high and low.
> The ability to withstand extreme shock and vibrational stresses.
> Use even with direct exposure to dirt, water and moisture.
> Insensitive to supply voltage fluctuations caused by the battery/generator systems.
> The electrical system must be insensitive to high levels of conducted and radiated interference.
> Application-related networking possible with the serial CAN bus suitable for mobile applications.
|
|
CB02N/CB02P :
These circuit boards are used to drive and protect brushless motorized rollers.
Motor torque depends on the speed variation required
Functions:
- Motor Run/Stop | | |
