|
|
The Idemag CPR Non Contact Interlock Switch range offers a compact slimline professional fitting and provides environmental protection up to 80C. and is suitable for high pressure hosing (IP66/67).
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment and can be actuated rom either the side or front switch face.
They will connect to most popular Safety Control relays to provide up to Cat. 4 EN 954-1. |
|
Eden is a new non-contact sensor using dynamic signal transmission. The sensor operates to category 4 according to EN 954-1 and has an extended sensing distance. Several Eden sensors and light beams can be connected in the same safety circuit and dynamically monitored by the Vital safety module.
We also offer several other types of interlocking devices. The Manufacturer of emergency stop Grab Wire protection switch JSNY10 provides 'emergency shutdown' up to 25 metres. |
|
Idem Magnetic Non-Contact switches are designed to interlock hinge, sliding or removal guard professional doors. They are specifically advantageous when:
a) poor guard alignment exists
b) high hygiene requirements exist e.g. food industry professional hose down
c) a long mechanical life is required (no moving or touching parts)
Idem Coded Non-Contact switches are designed to interlock hinge, sliding or removal guard doors. They are specifically advantageous when:
a) poor guard alignment exists
b) high hygiene requirements exist e.g. food industry hose down
c) a long mechanical life is required (no moving or touching parts)
d) tamper-proofing is required |
|
The Hygiecode SMC Non Contact Interlock Switch range offers a compact yet robust 22mm professional fitting and provides environmental protection up to 105°C. and is suitable for high pressure hosing. The housing is finished and sealed with a stainless steel back plate for extra mechanical and environmental durability.
In addition to the high enclosure specification the switch offers a wide 14mm sensing distance, a high tolerance to misalignment, LED indication of switch status, 'anti-tamper' coded magnetic actuation, and 2NC 1NO switching circuits to cope with modern industrial control requirements.
They will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1 and SIL 3. |
|
Pizzato Elettrica has designed and patented new accessories to install the rope of protective switches faster and to obtain an aesthetically more pleasant system.
The new accessories, in comparison with the traditional fixing system through carpentry material, have the following advantages:
%u2022 The installation is faster because only one screw is used for the fastening of every rope extremity, and the parts are prepared to ease the installation. Some practical tests have pointed out that the installation time is halved, reason for which it is named FAST.
%u2022 The system is aesthetically pleasant, because thread parts (which sometimes tear operators%u2019 dresses) and the rope extremities, usually fixed by heat-shrinkable sheath or supplier of adhesive tape, have been hidden.
%u2022 The red plastic covers of the fixing parts have been developed also for the function of controlling the rope clamping. If the rope fastening screw is not fixed tightly enough, the cover cannot pass.
%u2022 The rope is fixed without folds, thus reducing the rope stabilisation time and the possible re-calibrations of the rope tightening.
Furthermore two sturdy pulleys has been introduced in applications where the rope is very long in order to support the rope length or to bend its route. They are designed to avoid any deformation and to allow the rope to remain in its industrial seat also when it is energetically activated. |
|
Command devices are of great importance for the man-machine interface in the area of industrial applications. For example, they are mounted in switch-boards, control panels, two-hand control panels, in lift manufacture and on materials-handling plants, including conveyors. Manual actuation of the devices starts operating sequences and functional processes or serves to bring these to an end.
Emergency stop command devices are generally connected in the safety circuit of a machine or plant and are of particular importance in terms of the control system for these. In case of a fault or accident, the secure function and quick accessibllity of Emergency Stop command devices can be crucial for saving life, limiting the degree of injury to personnel or the extent of damage to a machine.
New requirements are placed on the mode of operation of these command devices by the new harmonised European Standard EN 418 regarding functional aspects and recommendations for the arrangement of Emergency Stop equipment.
|
|
| Stop XP/TX products are heavy duty explosioin protection safety gate switches designed to provide versatile solution to controlling access to machinery and process lines operating in potentially explosive enviroments found in the chemical and petrochemical paint , pharmaceutical, powders and mining industries. |
|
Control Switches for Panel Mounting Series 8003
Explosion protection to
CENELEC
IEC
For use in
Zone 1 and Zone 2
Zone 21 and Zone 22
Switch function
many switching arrangements (latching or spring-return) possible via coding
easy change of the coding possible on site
max. 2 pole
For max. 6 A
With connection leads or terminals |
|
Safety coded magnetic sensor, SR-SM series
Pizzato Elettrica offers on the market the new safety magnetic sensor SR-SM series.
Safety magnetic sensors are devices studied to monitor protections and guards that, when linked to a safety module, can create a system up to safety category 4, according to EN 954-1. These products are composed by a magnetic field monitoring sensor, which is connected to the machine structure; and by a coded magnetic actuator, which has to be connected to the mobile guards. The sensor is manufactured to be activated only by the correct coded actuator and not through a common magnet.
Pizzato Elettrica safety sensors distinguish themselves by following main features:
• Insensitivity to dirt as totally sealed, making them especially proper to be used in the food-industry sector.
• Wide actuation zone, characteristic appreciated in the use of inaccurate protections or for protections that can change their mechanical characteristics through the time.
• Stainless steel fixing plates to avoid that the sensor could be damaged during the installation.
• Possibility of connection in series more sensors also with mechanical switches.
• Actuation from two different directions.
• Available with cable or M8 integrated manufacturer of connector.
• Actuators with operating distance of 5mm or 8 mm.
The new sensor series complete the wide range of products that Pizzato Elettrica can offer in the device safety field. For further information visit our web-site www.pizzato.com or ask for special documentation. |
|
SAFETY SWITCHES SUPPLIERS HINGE-SHAPED, PALLADIO LINE
Pizzato Elettrica widens the own range of products making a new series of safety switches hinge-shaped named Palladio, where thanks to an aimed planning and a punctual analysis of the market requirements, safety and style are melted in one single product. The switch is completely integrated in the mechanical hinge, to result practically invisible to an inexpert eye. This guarantees a higher safety because a switch hard to identify is consequently also more difficult to defeat.
The assembly without visible screws and the pleasant line, make the switch perfectly integrated also with guards of modern design machinery.
In order to complete the offer it’s available also an additional hinge with purely mechanics functions.
The innovation of the product regards also the technical aspects, as following:
• Several contact blocks up to 4 contacts (2 NC contacts + 2 NO contacts).
• Possibility of operating point regulation (fundamental for large guards).
• Protection degree IP67.
• Integrated cable or industrial connector output available from the frontal or the rear side. |
|
| Plant and mechanical engineers are responsible for ensuring personal safety. The center safety products of elobau range from sensors and evaluation units for small machines to bus components for large plants. The personnel of elobau GmbH offers support with the implementation of the latest safety guidelines. |
|
Z/T and E.95 range position switches are suitable for sliding and hinged safety guards, which need to be closed to ensure the necessary operational security.
In combination with AES and/or AZR range safety monitoring modules all position switches class 1 shown in this chapter achieve Control Category 3 or 4 to EN 954-1.
Further applications for positions switches class 1 are most varied positioning duties. The variety of requirements to be found in practice can be met in detail by means of a wide range of actuating elements.
Design and mode of operation:
On the position switches class 1 the guarding device and the positive break NC contact are positively linked.
Schmersal make both standard and AS-i Safety at Work position switches with safety function.
Click here to see the AS-i models
Or for the standard models click below
|
|
A range of robust modular electromechanical safety switches for industry. Also available with safety keys (to prevent accidental lock in) and access keys.
- All switches are equipped with LED status indicators
- Acutuators for hinged and industrial sliding door
- Available with internal release adaptor |
|
Manufacturer of safety switches FR series
Pizzato Elettrica switches of the FR series with separate industrial actuator reach the 4th generation. These switches are ideal for gates, protections, carter and all different guards which protect dangerous parts of a machine. The stainless steel actuator is fixed to the mobile section of the protection in order that every time the protection is opened the actuator is pulled out of the switch. A particular mechanism assures the positive opening of the electrical contacts by the pulling out of the actuator. These switches are easy to install and can be applied to any type of protection (hinged, sliding or removable). Furthermore the possibility of operating the switch only with the specific actuator assures that the machine can start again only when the guard is closed.
Pizzato Elettrica switches of the FR series distinguish themselves for the following characteristics:
• Rotating heads: by unscrewing the fixing screw the head can be rotated in 90° steps.
• Not detachable heads: the head “93” is perfectly interchangeable and compatible with the previous head “92” but it has the advantage that it is not detachable from the body, nonetheless it can rotate in 90° steps (Pizzato Elettrica patent). Practically speaking the new head is safer because it’s not possible to damage it during the installation.
The FR series complements the range of products that Pizzato Elettrica can offer to its customers. For further information, please visit the website www.pizzato.com or ask for the relative documentation. |
|
These protection switches are ideal to control gates, sliding doors and other guards protecting dangerous parts of machine. The stainless steel actuator is fastened to the moving part of the guard, so it is removed from the switch on every opening of the guard. The switch mechanism guarantees that removing the actuator forces the positive opening of the electrical contacts. Easy to install, these switches can be applied to any kind of protection (with hinge, sliding and removable ones). Besides, the possibility to actuate the switch only with its actuator guarantees that the machine can be restarted only when the guard has been closed.
- Polymer housing, three M20 or M16 knock out conduit entries
- Protection degree IP67
- 6 contact blocks available
- 8 stainless steel industrial actuators available
- 30 N actuator extraction force versions
- Silver contacts gold plated versions
- Cylindrical or slotted fixing holes
- Cover with hinged opening and with only one fixing screw. |
|
Application:
Safety switches with separate supplier of actuator are suitable for sliding, hinged and particularly removable safety guards, which need to be closed to ensure the necessary operational security. They are also suitable for professional fitting on profile sections and existing equipment.
In combination with safety control modules all safety switches with class 2 shown in this chapter achieve Control Category 3 or 4 to EN 954-1.
Design and mode of operation:
On the safety switches with class 2, the switching element is not physically connected to the actuator but functionally brought together or separated for switching. When the guarding device is opened, the actuator is separated from the base unit. In the process, NC contacts are positively opened and NO contacts closed.
Enclosure rating of all the safety switches is IP 67. The safety switches can be fitted in any desired mounting position.
Schmersal make both standard and AS-i Safety at Work safety switches with separate actuator.
Or for the standard models click below
|
|
Honeywell electromechancial protective switches are metal or plastic devices available in standard mounting per EN 50041, standard mounting per EN 50047 and compatible with standard mounting per EN50047, as well is in miniature versions. Direct opening contacts mean that even a welded contact will be broken and a stop signaled. Compliant with European safety directives. Wide variety of electrical characteristics, actuators manufacturers and terminations are available. Gold-plated contacts available for low energy control applications.
Best Used For:
Industrial safety equipment guarding applications where physical contact with the guard is essential and where a key-operated switch may be impractical or impossible to implement. Miniature versions are designed for applications where space is at a premium.
|
|
Ratings 25 - 125A three and four pole
Comply with IEC 947-3 AC23 utilisation category
Disconnecting electrical equipment from the main
Visible indication of contacts status (when operation handle is in the 'OFF' position all contacts are open)
Red/Yellow manufacturer of emergency stop operating handle
Handles padlockable in the 'OFF' position
Front and rear mounting options
Special emergency stop pushbuttons with undervoltage release available
Enclosed versions available
Wide choice of accessories : terminal shrouds, black/grey operating handles, auxiliary contact blocks, fixed and switched neutral add-on contact poles, shaft extensions for greater panel depth operation
|
|
Ex-Safety and Main Current Switches
CEAG protection switches can be protected against inadvertent switching on by our integrated locking facility for up to three padlocks in the OFF position.
To prevent manipulations, the enclosure covers cannot be opened in the locked position without destroying the enclosure itself.
All CEAG safety switches feature full AC-3 motor switching capacities and isolating properties according to EN 60947-4-1 with compulsory opening of the main current contacts; optional EMERGENCY STOP versions according to EN 60204-1 are also available. |
|
Safety contactors are used to detect the opening of line guard professional doors, gates or panels and to prevent physical access to dangerous areas of the machine. Safety switches are designed to help deter tampering with either the internal machine controls or guards while in an unsafe condition.
All mechanical safety switches are equipped with positive opening contacts that open any normally closed contacts to assure machine shutdown when an unsafe condition is detected. |
|
| The FailSafe GuardSwitch is designed as a safety interlock to be attached to a machine's guard or professional door. Unlike a standard reed switching interlock, the circuit has been designed to have an "open" failure mode. If the main reed sticks closed when the guard opens, the in-line fuse will blow, opening the circuit. If the watchdog reed sticks closed when the guard closes, the in-line fuse will blow, opening the circuit. The circuit will draw up to 4.5A to blow the fuse in less than 200ms. Along with being FailSafe, all the 200 series switches have non-coded actuators manufacturers. |
|
| GE Security Industrial safety interlock switches are used to detect the opening of guards-including professional doors, gates and/or removable covers-that prevent access to dangerous parts of a machine, and to help deter tampering with the guards or the internal machine controls. |
|
Protection switches are used to detect the opening of centre guard professional doors, gates or panels and to prevent physical access to dangerous areas of the machine. Safety switches are designed to help deter tampering with either the internal machine controls or guards while in an unsafe condition.
All mechanical safety switches are equipped with positive opening contacts that open any normally closed contacts to assure machine shutdown when an unsafe condition is detected. |
|
Designed for applications where safety, high performance and continuity of service are essential. Featuring quick-make, quick-break mechanisms.
Features and Benefits
Wide, unobstructed gutter and removable interior make wire pulling quick and easy.
Direct-drive, quick-make, quick-break mechanism provides long life and positive ON/OFF indication .
Bright red handles are easy to see, easy to grip; donut shape on heavy duty and double throw industrial safety switches is ideal for bookstick operation.
Positive 3-point mounting speeds installation, simplifies ganging in close quarters. |
|
Safely equipped for all cases
According to EN 292-2 (Device safety), movable guards must be provided with safety switches. Protective door manufacturer of bolts for protective devices work in tandem with SICK safety switches. On deliberate opening of the protective device, the N/C contact of the safety switch is opened and the hazardous motion of the machine is brought to a standstill.
Developed for harsh industrial everyday use
SICK products easily withstand harsh conditions such as impacts and vibrations. Opening, closing and locking is reliably guaranteed over a long lifetime. SICK safety switches are available in plastic or metal versions.
|
|
UE410 Flexi modular safety controller:
safety perfectly managed
- Optimised for the linkage of up to
approx. 10 safety operations
- Simple parameterisation with a bolting
(no software required)
- Integrated functions: And / Or / Muting / Bypass
- Optimum integration of SICK protection sensors
- Safety relay and semiconductor outputs
For packaging, system tools, placement and
handling machines |
|
|
