|
|
Guard Locking Tongue Switch - Type KLM
Designed to fit to hinged or sliding guards to provide high mechanical holding force and safety interlocking where it is required to protect the operator from moving machinery.
A unique internal mechanism design provides up to 4NC 2NO contacts and provides independent monitoring of the locking mechanism and the tongue position.
2 LED's provide Status of the Solenoid and Door Locked
Can be used with a Safety Relay to provide EN954-1 Cat.4 protection.
Rugged Die Cast housing - IP67 enclosure protection and optional Stainless Steel Head.
Provides Guard Holding up to 3000N (300Kg)
Spring to Lock - Solenoid operate to release
Conduit entry M20 or ½" NPT
Solenoid Voltages available: 24V. ac/dc 110V.ac 230V.ac
Flexible actuator available.
|
|
AZM range solenoid interlocks, operating in combination with control elements of a machine, e.g. fail-safe standstill monitors or fail-safe delay timers, ensure that sliding, hinged and removable guarding devices, such as grids , hoods or doors, cannot be opened until hazardous conditions (e.g. running-down movements) have come to an end.
These solenoid interlocks are also used for cases in which the opening of a guarding device represents a non-permissible intrusion in a production process.
In combination with AES and AZR range safety monitoring modules, the AZM range solenoid interlocks achieve Control Category 3 or 4 to EN 954-1, subject to suitable circuit arrangements. Examples of circuits for solenoid interlocks are shown in the Schmersal Control Circuit and Applications Handbook.
Schmersal make both standard and AS-i Safety at Work solenoid interlocks.
Click here to see the AS-i models
Or for the standard models click below
|
|
RTK*E
* From 1 to 6 key slots
- Without contacts, this rotating lock is used to block circuit breakers, differential circuit breakers, accesses, ...
-Equipped with contacts permits blocking of command circuits (2O-2F) or power circuits (3O-1F up to 22KW)
- There are various versions available based on the application needs
Positive safety: Opening of the circuit by extraction related to the handling of the key.
Key logic:
%u2022 Without contacts, cam action
%u2022 1 Key: Held Key, 2 contacts
open, 2 contacts closed
%u2022 Various keys: Associative functioning ( )
%u2022 Various keys: Interchange functioning ( / ) (A keys free, B keys held)
|
|
|
|
|
|
Magsafe is Smartscan’s latest innovation in machine safety. An electro-magnetic interlocking system for controlling personnel access through the gates and doors set within the perimeter safety fencing or screens surrounding potentially hazardous machinery.
The key design element in Magsafe was to lock the door using magnetic force rather than by mechanical means and to remove the problems that plague existing gate locks due to liquid and dirt exposure in combination with the rigors of daily operation. This causes fatigue and leads to mechanical failure of the product. The ability to withstand harsh industrial environments such as water, dust and corrosive liquids Magsafe is the perfect solution for most guard locking applications.
In addition to this Smartscan has applied its safety light curtain technology background to the safety gate interlocking market by providing a system control unit which continuously monitors the on and off state of the magnets. This ensures the system detects when the gate is open and when it is closed. Only when the gate is closed and the magnetic locking force applied, will the control system allow machine operation.
|
|
Designed to control access to the dangerous or protected areas, this device is installed in any kind of door, gate, housing, and permits remote unlocking from a distance.
Equipped with a forced opening contact, it permits the detection when the access is closed again.
|
|
|
|
|
|
NEWS 2009
SAFETY HANDLES P-KUBE LINE
Thanks to the experience in the field of safety switches, Pizzato Elettrica introduces an innovative line of safety handles called P-KUBE.
This new line represents the answer to practical issues that the operators have with the application of safety switches on machinery guards, like the ease of installation, the precise mechanical movements of the guard, the occurrence of critical environmental conditions, the presence of inattentive staff.
Unlike other products on the market, the basic principle of this series provides that the operator can enter and exit the danger zone with simple and natural movements by avoiding the locks to bolt. Its special design and materials allow the safety handle to be used in heavy applications or with sturdy protections.
The safety handles P-KUBE line distinguishes itself by the following main features:
- Easy installation and easy functioning: to open or close the door there are only intuitive actions needed.
- Handle provided with a self-centering sturdy metal pin in order to have the alignment between the jamb and the door: this device works also as a door mechanical stop.
- Possibility to assemble it on swing and sliding doors.
- Possibility to adjust the handle on 3 different axis through slotted brackets.
- Optional Lock-out device with padlocks to avoid the unwanted or accidental closing of the protection by the insertion of the actuator in the switch.
- Compatible with switch FD series with separate actuator and switch FG series with solenoid.
|
|
|
|
|
|
IDEM has launched The Kobra 'Hygiecam' KL3-SS , the world's first Solenoid Locking Tongue Interlock Switch in a fully Stainless Steel 316 housing. The switch has a mirror polished finish and is designed to cope with the rigorous high pressure hose cleaning demands of food and beverage manufacturing industries.
The KL3-SS is a compact, slimline locking switch designed to fit to all general applications.
The housings are IP69K rated and provide guard locking for medium to heavy duty guards (up to 3000N.).
The head is rotable to provide 8 actuator entry positions and all fittings including the actuators are made from Stainless Steel 316 to provide tough mechanical and environmental durability.
The switch is released by applying power to the solenoid after the machine is stopped.
A uniquely designed mechanism means that 2 sets of positively driven contacts are provided to monitor the actuator position and the solenoid status independently.
4NC Safety and 2NO auxiliary circuits are provided plus there are 2 LED's to provide independent diagnostics for the solenoid status and the actuator lock status.
|
|
Guard Locking Tongue Switch - Type KLM
Designed to fit to hinged or sliding guards to provide high mechanical holding force and safety interlocking where it is required to protect the operator from moving machinery.
A unique internal mechanism design provides up to 4NC 2NO contacts and provides independent monitoring of the locking mechanism and the tongue position.
2 LED's provide Status of the Solenoid and Door Locked
Can be used with a Safety Relay to provide EN954-1 Cat.4 protection.
Rugged Die Cast housing - IP67 enclosure protection and optional Stainless Steel Head.
Provides Guard Holding up to 3000N (300Kg)
Spring to Lock - Solenoid operate to release
Conduit entry M20 or ½" NPT
Solenoid Voltages available: 24V. ac/dc 110V.ac 230V.ac
Flexible actuator available.
|
|
AZM range solenoid interlocks, operating in combination with control elements of a machine, e.g. fail-safe standstill monitors or fail-safe delay timers, ensure that sliding, hinged and removable guarding devices, such as grids , hoods or doors, cannot be opened until hazardous conditions (e.g. running-down movements) have come to an end.
These solenoid interlocks are also used for cases in which the opening of a guarding device represents a non-permissible intrusion in a production process.
In combination with AES and AZR range safety monitoring modules, the AZM range solenoid interlocks achieve Control Category 3 or 4 to EN 954-1, subject to suitable circuit arrangements. Examples of circuits for solenoid interlocks are shown in the Schmersal Control Circuit and Applications Handbook.
Schmersal make both standard and AS-i Safety at Work solenoid interlocks.
Click here to see the AS-i models
Or for the standard models click below
|
|
RTK*E
* From 1 to 6 key slots
- Without contacts, this rotating lock is used to block circuit breakers, differential circuit breakers, accesses, ...
-Equipped with contacts permits blocking of command circuits (2O-2F) or power circuits (3O-1F up to 22KW)
- There are various versions available based on the application needs
Positive safety: Opening of the circuit by extraction related to the handling of the key.
Key logic:
%u2022 Without contacts, cam action
%u2022 1 Key: Held Key, 2 contacts
open, 2 contacts closed
%u2022 Various keys: Associative functioning ( )
%u2022 Various keys: Interchange functioning ( / ) (A keys free, B keys held)
|
|
|
|
|
|
Magsafe is Smartscan’s latest innovation in machine safety. An electro-magnetic interlocking system for controlling personnel access through the gates and doors set within the perimeter safety fencing or screens surrounding potentially hazardous machinery.
The key design element in Magsafe was to lock the door using magnetic force rather than by mechanical means and to remove the problems that plague existing gate locks due to liquid and dirt exposure in combination with the rigors of daily operation. This causes fatigue and leads to mechanical failure of the product. The ability to withstand harsh industrial environments such as water, dust and corrosive liquids Magsafe is the perfect solution for most guard locking applications.
In addition to this Smartscan has applied its safety light curtain technology background to the safety gate interlocking market by providing a system control unit which continuously monitors the on and off state of the magnets. This ensures the system detects when the gate is open and when it is closed. Only when the gate is closed and the magnetic locking force applied, will the control system allow machine operation.
|
|
Designed to control access to the dangerous or protected areas, this device is installed in any kind of door, gate, housing, and permits remote unlocking from a distance.
Equipped with a forced opening contact, it permits the detection when the access is closed again.
|
|
|
|
|
|
NEWS 2009
SAFETY HANDLES P-KUBE LINE
Thanks to the experience in the field of safety switches, Pizzato Elettrica introduces an innovative line of safety handles called P-KUBE.
This new line represents the answer to practical issues that the operators have with the application of safety switches on machinery guards, like the ease of installation, the precise mechanical movements of the guard, the occurrence of critical environmental conditions, the presence of inattentive staff.
Unlike other products on the market, the basic principle of this series provides that the operator can enter and exit the danger zone with simple and natural movements by avoiding the locks to bolt. Its special design and materials allow the safety handle to be used in heavy applications or with sturdy protections.
The safety handles P-KUBE line distinguishes itself by the following main features:
- Easy installation and easy functioning: to open or close the door there are only intuitive actions needed.
- Handle provided with a self-centering sturdy metal pin in order to have the alignment between the jamb and the door: this device works also as a door mechanical stop.
- Possibility to assemble it on swing and sliding doors.
- Possibility to adjust the handle on 3 different axis through slotted brackets.
- Optional Lock-out device with padlocks to avoid the unwanted or accidental closing of the protection by the insertion of the actuator in the switch.
- Compatible with switch FD series with separate actuator and switch FG series with solenoid.
|
|
|
|
|
|
IDEM has launched The Kobra 'Hygiecam' KL3-SS , the world's first Solenoid Locking Tongue Interlock Switch in a fully Stainless Steel 316 housing. The switch has a mirror polished finish and is designed to cope with the rigorous high pressure hose cleaning demands of food and beverage manufacturing industries.
The KL3-SS is a compact, slimline locking switch designed to fit to all general applications.
The housings are IP69K rated and provide guard locking for medium to heavy duty guards (up to 3000N.).
The head is rotable to provide 8 actuator entry positions and all fittings including the actuators are made from Stainless Steel 316 to provide tough mechanical and environmental durability.
The switch is released by applying power to the solenoid after the machine is stopped.
A uniquely designed mechanism means that 2 sets of positively driven contacts are provided to monitor the actuator position and the solenoid status independently.
4NC Safety and 2NO auxiliary circuits are provided plus there are 2 LED's to provide independent diagnostics for the solenoid status and the actuator lock status.
|
|
| ... products without technical information |
| |
For outdoor and indoor applications
Available in Diesel or LPG
Basic capacities from 12000 kg to 25000 kg
|
|
Manipulator of coil
charge up to 300 kg
Stainless or aluminum
Height of lifting until 2230mm
Rechargeable battery with built-in charger.
specific gripping on request.
|
|
Up to 50 t load, up to 8 m lift
Short assembly and maintenance times
Durable metal welded construction
available alternatives: prism, roll, or slotted prism construction
High service life, even with rough, continuous operation
Rapid interchange of all drive components
The guided roller configuration ensures good guidance and a high lateral stability
All bearings are lubricated for life, regreasable bearing version is also available on request
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
The coil-handling programme is supplemented by a multitude of special designs and accessories.
|
|
| ... products without technical information |
| |
Compact Coil punching machines PXN easy by Dalcos incorporate the advantages of the coil punching technonolgy in a simple and compact system.
The automatic processing starting from the coil guarantees low hourly costs and high productivity, compared to the traditional punching systems. The raw material is optimized up to 100%.
PXN easy by Dalcos are available for strip-widths from 20 up to 300, 400, 600, and 1000mm and thickness from 0,3 to 2mm, with 5 or 10 moving tools.
The video of the machines are available at http://www.pxneasy.com.
|
|
PivaPunch is the most efficient and versatile coil punch on the market.
Smaller manufacturers will find it useful to be able to run smaller product series back-to-back or nested together fully automatically. Larger manufacturers will find PivaPunch's better cycle times more profitable. PivaPunch is non-operator dependent, making it possible to run 24/7 with minimal assistance.
Pivatic’s latest punching solutions offer you the best sheet punching capability on the market today – both flexibly and effectively. PivaPunch allows you to reduce part cycle times and production turnaround times without compromising on flexibility.
|
|
CMR CAM 2S
AUTOMATIC VERTICAL STRAPPING MACHINE
This machine carries out automatically the toroidal strapping of skeins and It is designed to be combined with vertical winding machines.
|
|
|
E-Z Tec 9000 range metal detectors and separators are used in a variety of industries including plastics, recycling, wood and textiles to detect and divert from product lines all types of metal contaminants, including stainless steel
|
|
| ... products without technical information |
| |
|
The line of mPm DIN connectors is designed to reduce the number of components making them easier to assemble and with fewer parts to stock. They provide repeatable, unsurpassed IP67 sealing performance using an external nut over the cable. Traditional Form A and B connectors require three different styles for PG07, PG09 and PG11. However the external nut accepts a wider range of cables from 4mm to 9mm, reducing the number of parts from 3 to 1. The new generation of DIN connectors is available in our complete range of field attachable sizes including Form A, B and C.
|
|
|
Mencom Corporation is a worldwide supplier of DIN Solenoid Valve Connectors. Product line includes over molded connectors, field wireable connectors, and quick disconnect connectors in form A, form B, Industry Standard form B, form C, and Industry Standard form C.
|
|
|
Via ESCHA valve connectors pneumatic and hydraulic valves as well as pressure sensors can be triggered. The connectors are available as A, B, I, C versions and with a contact spacing of 9.4 mm and comply with EN 17 5301-803 (replacing DIN 43650).
|
|
M8 round plug connector
MQ12 round plug connector
Round plug connector M12 Steel
M12 round plug connector
Connectors for fieldbus technology
M8-, M12-, 7/8"- T-couplers
|
|
|
|
see the results for the following category : 
