|
|
• Ratings up to 16A, 250V ac
• Stainless steel construction
• Single and double pole
• Latching and momentary operation
• Front panel sealing to IP66
• Wide choice of terminals
• RoHS compliant
|
|
Manufactured from Stainless Steel, Bulgin’s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile environments such as access control applications.
The front and rear panel mounted versions have three profiles – prominent, domed and low profile – with a choice of switching and IP66 & 68 front panel sealing that, combined together, meet the ergonomic, electrical and environmental demands of switch panel design. And where the ultimate strength of steel is not needed, there is a brass, chrome plated alternative. The low profile style switches are now also available with a latching, push on - push off, action.
The illuminated versions, available in dot and ring indication and a variety of illumination colours, are new to the range and will add that extra dimension to control panel layouts.
Other switch types include conventional push-button and toggle switches.
|
|
• Ratings up to 16A, 250V ac
• Round and rectangular profiles
• Single and double pole
• Latching and momentary operation
• Illuminated and non-illuminated actuators
• Choice of lens & actuators
• Custom actuator options
• Front and sub panel mounting options
• Accessories include sealing covers
• RoHS compliant
|
|
|
The Series 1025 Foot and Palm Switches are industrial-rated switches suited to applications where an operator must have both hands free to perform other functions or, where a highly visible switch is required for quick and easy operation. All of our switches are available in a wide choice of contact arrangements, ratings and enclosure styles. Industrial duty 4 way 5 port air valves are available for air control circuits.
|
|
The XA and XW series of Emergency Stop switches include a revolutionary new technology called "safe break action" that will change the way E-Stop switches are designed. This innovative concept provides greater levels of human safety and is the first of its kind in the world.
Conventional E-Stop switches are designed with spring pressure on the Normally Closed (NC) contacts, keeping them in the closed position and allowing the machine to operate. Improper installation or excessive force to the stop button in an emergency may break or dislodge a vital part, causing the spring loaded contact to stay closed. This situation renders the E-Stop incapable of stopping the machine and can lead to catastrophic events, personal injury and possible loss of life.
|
|
The XA and XW series of Emergency Stop switches include a revolutionary new technology called "safe break action" that will change the way E-Stop switches are designed. This innovative concept provides greater levels of human safety and is the first of its kind in the world.
Conventional E-Stop switches are designed with spring pressure on the Normally Closed (NC) contacts, keeping them in the closed position and allowing the machine to operate. Improper installation or excessive force to the stop button in an emergency may break or dislodge a vital part, causing the spring loaded contact to stay closed. This situation renders the E-Stop incapable of stopping the machine and can lead to catastrophic events, personal injury and possible loss of life.
|
|
|
If you need a compact rugged E-Stop or an E-Stop Station, there is a wide range of sizes and designs available. Options range from Illuminated push-pull to pushlock key reset.
|
|
General Purpose Illuminated Pushbutton Switches
Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment and many other commercial applications. A variety of options are available such as illuminated and non-illuminated versions, colored lens caps, lamp styles, and mounting styles.
Each pushbutton series offers a matching indicator for a consistent look. See the reference table below to quickly identify the required product. Then, refer to the selection table to determine the catalog number.
095 Series
Options:
T-1 lamps.
Special dead front and sunlight readable lenses legends.
Split legend lenses.
Military Snap-Switch, MS 8805.
|
|
The GE Push Button offering includes a complete line of pilot devices and stations for industrial and commecrial applications. They are available in 30mm and in 22mm sizes.
They are available in 30mm and in 22mm sizes.
The C-2000TM 22mm push button line has interchangeable components that snap together, simplifying assembly, reducing inventory requirements, and increasing flexibility.
Features and Benefits
Ultrasonically welded contact block - provide superior environmental protection.
Double bridge contacts - provide excellent performance even in low-voltage applications.
Permanently bonded front gasket-provide superior sealing against contaminants and makes installation foolproof.
|
|
FP01 (Contactless)
Illuminated Pushbutton Switches
GB (ultra-mini)
Fully Illuminated Plunger
HB (sub-mini)
Illuminated Pushbutton Switches
HB2 (sub-mini)
Illuminated Pushbutton Switches
KB (miniature)
Illuminated Pushbutton Switches
KP (miniature)
Silent Pushbutton Switches
LB (standard)
Illuminated Standard Size Pushbutton Switches
LP01 (miniature)
Illuminated Short Body Pushbutton Switches
UB (miniature)
Illuminated Single Element Pushbutton Switches
UB2 (miniature)
Illuminated Multi-Element Pushbutton Switches
YB (miniature)
Illuminated Bushing & Snap-in Switches
|
|
The Series 59 Maintained Action Switches further extends the comprehensive selection of Series 59 switches that are designed and manufactured by ITW.
The Series 59 Maintained Action switches are manufactured from PBT and are available in seven different button colours. The switches are panel sealed to IP67 and have an operating temperature range of -40 to +105 degrees C. The switches incorporate gold contacts and have both an electrical and mechanical life of at least 100k cycles.
|
|
the Series 100 right angle miniature pushbutton switch is available in momentary or maintained action with a variety of keycap styles and colours. Ideal for high volume, low-cost electrical applications.
Key Features: Single or double pole, PCB terminals, silver contacts.
Contact rating 500mA, 30V DC, 800mA, 30V DC.
Initial Contact Resistance: 50 milliohms Max @ 5 VDC, 100mA.
|
|
The Series 59 is a range of miniature, momentary action, rugged, IP67 rated, panel sealed pushbutton switches. The series is available with square or round bezel versions, with or without LED status illumination.
A choice of body material is provided of either a non-spark zinc alloy or a hard wearing moulded PBT plastic.
The small size of the switch, its robustness and panel sealing make it ideal for use in harsh environments.
The mechanical life of the switch is 1,000,000 cycles (max), with an electrical life of 500,000 cycles (min).
Operating temperature range is -35 to +85 degrees C.
Panel thickness required is a minimum of 1.5mm to a maximum of 3.0mm.
|
|
The 76-94 Series has been designed to cover a wide range of harsh environmental applications and is available in 3 styles, push-button, rotary and panel lamp.
The complete range is panel sealed to IP67 and due to the construction and the materials used, are all capable of surviving the impact of a 5kg mass dropped from 40cm.
All the bezels and the actuators of the push-buttons and rotaries are made from a non-sparking zinc alloy.
The range has solder/faston terminals as standard and options include custom colours, PCB terminals, gold contacts and 2 pole variants.
|
|
Vandalproof Stainless Steel Pushbutton Switches
18-22mm diameter
with and without Ring- or spot illumination
Standard and custom engraving option
various connection possibilities
|
|
The 76-94 Series has been designed to cover a wide range of harsh environmental applications and is available in 3 styles, push-button, rotary and panel lamp.
The complete range is panel sealed to IP67 and due to the construction and the materials used, are all capable of surviving the impact of a 5kg mass dropped from 40cm.
All the bezels and the actuators of the push-buttons and rotaries are made from a non-sparking zinc alloy.
The range has solder/faston terminals as standard and options include custom colours, PCB terminals, gold contacts and 2 pole variants.
|
|
Panel mounting on Ø 22.5 mm holes, IP65 protection rating, available
with “black” or “chrome” finish, EN418 emergency mushrooms, terminals with screws,
spring loaded or for printed circuit boards. Push button stations up to 3 gang or
enclosures up to 6 gang. Version for pneumatic systems available.
|
|
Features
- Choice of Momentary, Push-Pull (reset) and Cheat Interlock switches
- Snap-in panel mounting
- Long-life coil spring, snap-action mechanism
- Agency approved extended-life versions available
- VDE approval available on select models (F Series)
- Various terminal forms available (consult factory)
|
|
General Purpose Pushbutton Switches - AC Rated
These general purpose ac rated pushbutton switches offer a wide variety of configurations, button styles and termination types.
The 7835 and 7836 light duty series are ac only pushbutton switches. They feature Slow-make/Slow-break butt type contacts with a light operating pressure that is particularly suited to instrumentation applications.
Ratings:
See selection table.
Circuits: 1PST, 1PDT, 2PDT.
Momentary action.
Contact Material: 3-6A Rated
Movable - Silver plated copper.
Stationary - Silver plated copper.
10-15A Rated
Movable - Silver plated copper with fine or coin silver contact face button.
Stationary - Copper with fine or coin silver contact face button.
Terminal Types: Screw Terminals - Brass.
Furnished unassembled.
8448 Series
#6-32 x 3/16² binding head screws (Cat. No. 811-2).
8410/8411 Series
#5-40 x 3/16² (Cat. No. 811-7206).
8406/8440 Series
#5-40 x 5/32² screws (Cat. No. 11-26).
Solder Lug - Brass silver plated.
|
|
The GE Push Button offering includes a complete line of pilot devices and stations for industrial and commecrial applications. They are available in 30mm and in 22mm sizes.
The CR104P (30mm) line heavy-duty oiltight and watertight line is complete with a variety of accessories and enclosures
Features and Benefits
Greater torque - due to right sided ring design, greater torque can be applied during assembly and installation to provide oil tightness.
Ease of assembly - one screwcontact block mounting.
Multiple industrial environments - all units (except PTP) are suitable for use in NEMA type 1, 3, 3R, 4, 4x, 12 and 13 applications kes installation foolproof.
|
|
|
The AP series of pilot lights offer a simple, low cost solution to panel mounted indicating light needs. Available in four panel cutout diameters, with either dome or flat lenses, all units use an integral LED array with built in current limiting resistor. All models mount with a locking ring that fastens from behind the panel, rendering them tamperproof from outside the panel. Termination is via solder terminals of various sizes, depending on the panel cutout. Available in 6V, 12V, or 24V AC/DC; there are also optional snap on transformers and a DC-DC converter to support higher voltages.
|
|
|
The AP series of pilot lights offer a simple, low cost solution to panel mounted indicating light needs. Available in four panel cutout diameters, with either dome or flat lenses, all units use an integral LED array with built in current limiting resistor. All models mount with a locking ring that fastens from behind the panel, rendering them tamperproof from outside the panel. Termination is via solder terminals of various sizes, depending on the panel cutout. Available in 6V, 12V, or 24V AC/DC; there are also optional snap on transformers and a DC-DC converter to support higher voltages.
|
|
Features/Benefits:
- Sealed against solder & cleaning processes
- Thru-hole and surface mount models
- Snap-fitting actuator accepts standard caps
- Tape & reel packaging available
- RoHS compliant models available
|
|
Pushbutton Switches
This range consists of 16 and 22mm models with momentary or ON/OFF operation. They are available in various colours and shapes (round, square, etc.) and in lighted or non-lighted versions.
Key-Type Selector Switches
Also available in 16 and 22mm models, the switches in this range provide switch control using a key.
Knob-Type Selector Switches
These 16 or 22mm switches can be controlled by turning the knob. They come with momentary or ON/OFF operation.
Indicators
The indicators in this range come in 16 or 22mm versions and in various shapes and colours.
|
|
|
|
|
|
AB (sub-mini)
Washable Subminiature Pushbutton Switches BB (sub-mini)
Process Sealed Anti-Static Push Button Switches
EB (miniature)
3 Amp Miniature Pushbutton Switches FB (sub-mini)
Super-Subminiature Push Button Switches
G3B (ultra-mini)
Ultra-Thin Pushbutton Switches GB (ultra-mini)
Through-Hole Mount Push Button Switches
GB2 (ultra-mini)
Ultra-Thin Pushbutton Switches HB (sub-mini)
Nonilluminated Push Button Switches
JP (standard)
High In-rush Rated Pushbutton Switches KB (miniature)
Nonilluminated Push Button Switches
LB (standard)
Nonilluminated Pushbutton Switches LP01 (miniature)
Short Body Push Button Switches
M2B (miniature)
Washable Pushbutton Switches MB2000 (miniature)
Miniature Push Button Switches
MB2400 (miniature)
Snap-Action Pushbutton Switches SB4011 (miniature)
3 Amp Momentary Pushbutton Switches
SCB (standard)
Snap Switch Push Button Switches UB (miniature)
Single Element Pushbutton Switches
UB2 (miniature)
Multi-Element Push Button Switches WB (standard)
WB Pushbutton Switches
YB (miniature)
Bushing & Snap-in Push Button Switches
|
|
From miniature pilot lights and switches that mount into 8mm panel cut outs through full size industrial switches that mount into 30mm cutouts, we have a switch or indicator for almost any application. Terminations include solder / quick connect terminals, screw terminals, or PC board pins for direct board mounting. Miniature models use snap action gold plated contacts for superior low level switching, whereas larger models use slow-make, double break contacts for switching heavier loads, up to 10A. Many models offer the flexibility of modular construction, which allows you to change contacts, lamp voltages or button colors easily.
|
|
Chromium plated metal bezel pushbuttons, switches and pilot lights, Ø 22 mm.
Description
An offer unrivalled in content
Pushbuttons, spring return
Multiple-headed pushbuttons, spring return
Emergency Stop or Emergency switching off mushroom head pushbuttons, Ø 30, 40, 60 mm
Selector switches and key switches
Pilot lights (LED, incandescent and neon lights)
Combined functions : contact + signalling
Complete products or sub assemblies for user assembly
Connection: screw clamp terminals, plug-in connector, Faston connectors, spring clamp terminals.
Robustness and safety
Certified and approved for meeting the requirements throughout all the continents: EN/IEC, UL, CSA, CCC, Gost, JIS, NEMA…
CE marking
Up to IP 66, IP69K
Low-load electrical contact and high power
Shakeproof connection screws (periodic re-tightening unecessary)
Simplicity and speed of installation
Only one installer required
Fixing by a single locking screw (anti-rotation)
Common accessories
|
|
|
Yaskawa's Bestact™ oil-tight and waterproof 3 amp reed push-buttons offer industry-standard 30 mm diameter operators with a NEMA 4/13 enclosure rating. They are ideal for gaseous Class I, Division 2 hazardous locations where explosion-proof enclosures are not needed. These push-buttons are UL Listed and CSA Certified and have pilot duty inductive switch ratings of C300 (180VA) and Q150 (69VA). NEMA size 4 or larger contactors can be energized directly. Available operators are flush, half-shroud, full shroud, mushroom head, 2 position knob, and cylinder lock. Up to four contacts per operator can be used.
|
|
The Series 49-59 is a range of momentary action, IP67 rated, pushbutton switches. The range consistes of both fully-sealed and panel sealed versions.
The flying lead version of the switch fits neatly into a 8mm thick (max) panel.
Held in position by a snap-fit retaining mechanism, the microswitch version has a maximum current rating of 10A and the advantage of SPDT-DB contacts to cover all circuit requirements.
The Series is available with a choice of round or square bezels and with or without status illumination. The body and button are manufactured from hard-wearing PBT.
Temperature range of upto +105 degrees C.
|
|
|
|
