|
|
OLED SmartSwitch and SmartDisplay are programmable modules that display graphics for alphanumeric characters, animated sequences, and video in 16 bit 65,536 colors.
The OLED technology allows us to provide a 180 degree viewing angle with high contrast and clarity, with wide temperature ranges of -20 to +70 deg C.
The modules are Epoxy Sealed with Straight PC Terminals to prevent entry of solder flux and other contaminants. Standoffs are utilized to allow for easy, secure mounting and alignment. The OLED SmartSwitch has a life of 1,000,000 actuations.
|
|
ITW manufactures a range of vandal resistant switches which are IP67 rated.
Series 57: A range of miniature, momentary, rugged panel sealed (IP 67) push-button switches. The body and button are manufactured from non-spark zinc alloy and are velour chrome plated. Mechanical life 1,000,000 cycles.
Series 76-59: A range of stainless steel vandal resistant switches which utilise the switching technology of the ITW Series 59 product range. Operating temperature range of -30 to + 105 degrees C. IP67 rated.
Series 76-95: A range of front and rear mounting, stainless steel switches. Rated to IP67. The switches are based on the ITW Series 16 snap-action microswitch. Connections are made via the solder terminals at the rear of the switch.
|
|
The miniature single push-buttons ET5 are single-pole impulse buttons with one make contact and very small dimensions.
• Base 4,5x4,8mm only, overall height 4mm only.
• Positive tactile feedback.
• Snap-in connections suitable for automatic insert.
• Switching travel 0,2mm.
• Life expectancy >100000operations.
• Especially suited for miniaturized equipments in measurementandcontrol technology, electro medical, information and data equipments.
• Due to its small dimensions the button ET5 can be also used as a reliable switch in foil-keyboards.
• New! Also available as SMT version.
• Available in 200 piece embossed taping reels.
|
|
|
|
|
|
Buttons and indicators diameter 22mm: available in round and square execution, with metal and thermoplastic guard, buttons ordinary, luminous, version step by step, emergency stops of safety, selectors up to 5 positions, indicator lamps in multiple achievements, vast range of accessories, systems of labelling, normal bulbs, neon, monoLED.
Buttons and indicators diameter 30mm: Vast range which deals with all the requirements of use in the difficult situations, buttons ordinary, luminous buttons, ordinary manipulators, selectors, luminous selectors, indicator lamps with transformer or resistor, mechanical buttons punch, fixings and selector n-key rollovers, buttons.
Components of order for safety: specific range of products devoted to the safety equipment for the machines. Innovating and ergonomic control devices: ordinary, luminous actuators with palm with mechanical system of fixing - portable Unit with accessories - Ordering of delegation of powers - bimanuelle Control panels with systems of socketed stanchion - Pedals.
Other products: push rods with palm, hanging button boxes, luminous columns, lighting of cupboards
|
|
push-button switch Baer
Characteristics • double pole
• on, off
• quick connect
• PCB terminals
• extended life (5E4)
• customised mounting
• momentary function optional
• temp. 100°
Rating 250 VAC, 8 (8) A
Dimensions (mm) 13.5 x 19
Actuator • push button
square 6 mm
Approvals ENEC
|
|
Baer momentary switch
Characteristics:
• single pole
• quick connect
• snap- in mounting or central-fixing
Rating: 250 VAC, 0.2 [0.2] A
Dimensions (mm):
various Actuator plunger
Approvals ENEC
|
|
|
|
|
|
Distinctive Characteristics :
Wide selection of illumination effects is achieved with single and bicolor, 1 - or 6-element LEDs in flat, beveled, or sculptured caps.
Alternating legends (patent pending) in choice of sculptured or flat caps, combined with super bright bicolor LED.
Combination of PCB mountability and short body allows use in compact applications.
Small behind panel dimension for snap-in mounting in tight spaces.
Snap-acting contact mechanism provides sensitive actuation with audible feedback; quick-make, quick-break characteristic limits arcing and prolongs electrical life.
Latchdown mechanism, independent of switching mechanism, gives outstanding stability and reliability plus visible and tactile indication of circuit status.
Terminals are epoxy sealed to lock out flux, solvents, and other contaminants.
Momentary and alternate action circuits available in the same space-saving body size.
Nonilluminated models available and shown in Pushbutton section.
Matching indicators available and shown at the end of Section M.
|
|
|
IMO's range of 22.5mm control pushbuttons and indicatorsare available with Plastic, Metal or Chrome bezels and are supplied in modular form to allow total flexibility. The Cam switch range offering sw.
|
|
|
Label plates for all standard control gear and signal lamp labelling. Choose from a selection of different materials designed to meet your needs. From stickers to inscribed plastic plates. A universal system is used independent of manufacturers. The available label plates can be used on multiple all push-buttons and signal lamps products from different manufacturers. You can make your selection using an easy comparative list.
|
|
- Custom switches developed to customers' specifications
- Integrated modules combining several technologies
|
|
This demonstration kit consists of a bicolor (Red/Green) SmartSwitch™. Where to
Purchase
This demonstration kit consists of a bicolor (Red/Green) SmartDisplay™. Where to
Purchase
Allows for portable display and demonstration of the bitmaps stored on the IS-DEM KIT-1 and the IS-DEM KIT-2.
Requires 4 AA alkaline batteries (not included).
Where to
Purchase
IS-DEV KIT-1: One SMARTSWITCH™ programmable LCD display module and two PCB mounted tact switches, with flash memory, power and programming connections.
Where to
Purchase
IS-DEV KIT-2 (pictured): Two SMARTSWITCH™ LCD programmable pushbutton switches on a PC board with flash memory, power and programming connections.
Where to
Purchase
IS-DEV KIT-3: Panel display including two SMARTSWITCH™ LCD pushbuttons and one SMARTSWITCH™ LCD display.
For purchase
contact factory.
|
|
|
|
|
|
RF / Microwave Configurable Switching and Sub-systems
The Giga-tronics' ASCOR Series 8000 line of switch products are based on rugged electromechanical switches and microwave relays rated for use from DC to 40 GHz with low insertion loss and high isolation route signals under remote control to simplify and improve automated test systems.
The standard Series 8000 offers GPIB, USB and Ethernet LAN communication interfaces. A self-contained design, with built-in power supplies, microprocessor controller board and up to 256 relay coils, makes it very easy to implement a microwave switch system. It is design to host all combination of microwave relay switches, terminated or non-terminated: SPDT, SP4T, SP6T, SP8T or Transfer switches. With a standard SCPI commands, the control interface provides with the ASCOR Series 8000 for ease of operation and configurability.
With the flexibility and versatility design, the Series 8000 is ideal platform for custom applications. It is geared to control any or all of the various switch types on the front panel or host switching system internally. The Series 8000 switch assemblies are supplied in standard light-weight enclosure and can be mounted in half or full width rack from 2U to 7U. Easily removable switches allow reduced mean time to repair.
|
|
|
|
|
|
The SCHURTER product range contains:
METAL LINE SWITCHES:
The latching and momentary action switches from the Metal Line are extremely rugged, feature top quality and attractive design. The mechanical switches have a pleasant tactile feedback and switching currents up to 250 VAC. The piezo switches have a high lifetime of 20 mill. operations and are hermetically sealed according to IP69K.
SENSOR SWITCHES:
The capacitive switches from SCHURTER
PRINTMOUNT SWITCHES
FRONTPANEL SWITCHES
PUBLIC TRANSPORT SWITCH
MEMBRANE KEYPADS:
SCHURTER provides complete solutions in highest quality from the concept to the delivery of the systems. Various types of membrane keypads meet individual requirements of design and operating convenience.
SENSOR KEYPAD:
The capacitive sensor keypad from SCHURTER
METAL LINE KEYPADS:
The piezo keypads are resistant to all types of contamination and liquids. Their completely metallic front panels make them absolute vandal-proof.
TOUCH PANEL / TOUCH SCREENS:
The touch screens match perfectly to individual requirements by using different mounting versions and thicknesses of ITO glass. Analog-resistive touch screens in 4 - 5 - or 8-wire technology and capacitive touch screens are available in standard sizes or as customized versions. Matrix touch screens are individually manufactured.
HOUSING SYSTEMS AND FRONT PANELS:
SCHURTER develops and manufactures customer specific housing systems and front panels in anodized aluminum, steel and plastic.
|
|
Series P76
Push-button switches
push-button operation
big, easy reading digits
snap on assembly using integrated pins for module mounting
optional decoupling diodes
Service life: 200.000 operations
Housing: thermoplast, color black
|
|
Pendant Overview Directory
• Flexitite Push Button Stations
Crouse-Hinds Flexitite Pendant Push-Button Stations are steel reinforced, molded neoprene units designed for safer, low maintenance control of overhead cranes and hoists. They are available in two, four, six and eight buttons, single- and two-speeds, A. C. or D.C.
• Multi-Speed 6 & 8 Button Stations
• Side Mounted Toggle Hoist Switches
Molded neoprene enclosures. Rugged style provides qreater operator safety and resistance to chemical fumes, water, dirt and all other industrial environmental hazards. Up-down legend permanently molded into the side of switch. Rating to 250 volts, 10 amp.; switch permanently wired and molded to cord.
|
|
Pendant Switch
Remote hand held pushbutton switch with coiled cord that extends to approximately 4 feet.
Rating: 10 A resistive at 28 VDC
Circuit: SPNO-DB
Housing: Black Nylon
Button: Black Nylon
Cord: Black Polyurethane
Moisture-Proof Mini with Sealed Connector
The button is only .440 in. diameter. Back of panel cable is sealed at the switch and at the terminals. The cable is protected with split convoluted conduit. Button is black nylon. Case is black anodized aluminum alloy. Body is molded of black PPS.
Grip Switch Assembly
Switch is built into a grip designed for rugged outdoor use. Automotive type connector.
Rating: 5 A resistive at 28 VDC
Circuit: SPNC-DB
Housing: Black Nylon
Button: Black Nylon
Cord: Black Polyurethane, 20 AWG
Left and right hand operation with various connection types available.
|
|
|
Water-resistant rocker switches are the ideal solution for all out-door uses where robustness, resistance and a high level of dust, moisture and splash protection are required. A perfect care on manufacturing and assembling the most tested and reliable rockers switches, guarantee up to IP 65 protection degree and a working life of at least 300,000 cycles.
|
|
| ... products without technical information |
| |
|
|
