|
|
Description
Glass length of 10.5 mm and diameter of 2.1 mm
Normally open 1 Form A contact
FeaturesRated Power (W) 0 to 10
Switching Voltage (VDC) 0 to 200
Switching Current (A) 0 to 0.5
Applications
General Purpose
Automotive
SpecificationsRated Power (W) 0 to 10
Switching Voltage (VDC) 0 to 200
Switching Current (A) 0 to 0.5
|
|
APEM piezo switches, PBA series
- Sealed to IP68 and IP69K once mounted on panel
- Easy to clean metal surface
- Very long life (50 million cycles)
- 316L stainless steel models for the food industry or harsh environments
- Custom laser etching
- 16 or 22mm bushing diameter
- Available in a wide array of colours: natural, blue, green, gold or red anodized, stainless steel.
- Ring or dot illumination
Applications: food industry, humid environments (swimming pool, SPA, car cleaning centres), medical equipment, chemical industry, machine-tools, home appliances…
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks
|
|
|
Programmable Piezo switch for water management, IP68 Dust & Water proof rated. Ideally use indoor (Prisons, Sport halls, Elderly houses) and outdoor highly traffic areas (Swimming pools, Beaches, Public showers). Easy to program the operating time. An automatic flush for pipes cleaning every 72 hours.
|
|
- Package sizes from 4.2 x 4.2 mm to 12 x 12 mm
- SMT and through-hole models
- Numerous options : tactile feedback, sealing, ESD protection...
|
|
|
|
|
|
Tilt switches are used to sense movement (tilt) of a device above and below a horizontal axis. The angle through which the switch must move for proper operation – the differential angle – is measured from the point of just make to just break; it is specified as a maximum. Some applications include: thermostats, level controls, appliances, security alarm systems, toys and games, float switches and water-treatment equipment (non-mercury)
Tip-over switches sense tilt over 360° of a vertical axis. A common use is in portable heaters used in the home to prevent electrical shock or fire. When the heater tilts more than a specified angle, the switch operates turning the heater off. This angle, called the operating angle, describes the angle from vertical to the point of contact operation. Both normally closed (tilt to open) and normally open (tilt to close) switches are available. Some additional applications include: portable lamps, PC anti-theft devices, vending-machine alarms and machinery security systems
Different technologies are available.
Tilt switch: Ball contact, Opto-electronics, Electronic tilt, Micro miniature, Non mercury contacts, Surface mount
Tip over switch: Ball contact
|
|
An anti-vandal Piezo electric switch for aircraft interior use, lavatories, call attendance, trash compactors or on board elevators.
An IP68 waterproof rated, 50 million cycles, No moving parts - even bacteria can't hide!
|
|
|
Piezo switch with ring illumination in various colors, IP68 waterproof rated, metal aluminum housing or STS, 50 million cycles. These push buttons are ideally for outdoor use and heavy traffic areas.
|
|
COMUS INTERNATIONAL (formerly known as CP CLARE INTERNATIONAL) is the only remaining manufacturer of MERCURY REED SWITCHES in the entire world. We can offer a complete range of mercury wetted reed switches : make contacts as well as change-over contacts, from 50VA up to 250 VA. High switching capability, very stable contact resistance and an extremely long life expectancy are the strenght of these switches.
These reed switches may still be used, not only for maintenance purposes, but also in some application area's indicated by the European ROHS Directive; monitoring and control instrumentation and medical equipment systems.
Application markets where these switches are highly used are ATE (automatic test equipment) and other test equipment, instrumentation and control equipment, power control, traffic regulation systems, etc...
|
|
The Bestact reed element is a highly reliable, broad control range reed switch that when used and implemented in various application products provides a user or manufacturing operation the utmost in uptime and throughput. Its broad control range allows a user to select one switch for any control load from TTL logic to fractional DC horsepower, thereby decreasing the various types of control devices needed for spare parts allocation while ensuring the same reliability levels.
|
|
TH-Contact piezoelectric switch
Characteristics:
• piezo technology
• momentary
• sealed IP68
• with or without illumination, two colors
• solid state output
• NO
Rating: 3 to 35 VAC/VDC, 200 mA
Actuator:
• housing in different colours
Approvals: none
|
|
|
|
|
|
|
Description: Piezo film’s capabilities to generate a high voltage output under bending strain, combined with its rugged form factor, make it an ideal candidate for solid state impact switches. Rather than using a switch contact closure, the piezo film generates a pulse which is detected by electronics. Although many of the DT’s, LDT’s and FLDT’s supplied by Measurement Specialties are used for switch applications, it is sometimes convenient to have a switch with integrated electronics. The SW100 is an ideal configuration for impact detection and momentary switch applications. A direct contact force on the tip of the stainless steel cantilever beam of the SW100 induces strain on the laminated Piezo Film Sensor (PFS) element. With dynamic strain, the PFS element generates an output that activates a built-in, normally-open circuit. Once activated, the circuit resembles the closure of a contact switch, but without the inherent discontinuity that contact points exhibit because of corrosion, pitting and bouncing. Thus the SW100 provides a single digital pulse that is ideal for triggering digital circuits and signal processing. The imperviousness, elasticity and reliability of the PFS element, along with the noise rejection characteristics of the circuit, combine to provide the SW100 with features that suit applications demanding consistent, reliable performance throughout tens of millions of switching cycles. Custom options are available to fit specific customer applications. For more information on the SW100, please call one of our applications engineers.
|
|
Having our own reed switch manufacturing and beinga distributor of OKI dry reed switches, the COMUS GROUP is able to supply every market and every customer with a wide range of different reed switch types.
From very small reed switch types, as the 7 mm GC2107, the 10 mm ORD211, over the most common used 14 mm types to the heavy duty types, normally open form A or change-over form C contacts, higher pressure or vacuum high voltage switches, COMUS makes them all.
Customized reed switches are available upon request. Cutting, bending, welding extension wires, bistable solutions are commonly asked modifications.
|
|
|
The Bestact reed element is a highly reliable, broad control range reed switch that when used and implemented in various application products provides a user or manufacturing operation the utmost in uptime and throughput. Its broad control range allows a user to select one switch for any control load from TTL logic to fractional DC horsepower, thereby decreasing the various types of control devices needed for spare parts allocation while ensuring the same reliability levels.
|
|
|
The IRIS Tilt Switch and Controller is a powerful control device that enables you to measure and respond to rotational movements in any direction with reference to the unchanging gravity vector. Standard versions of IRIS offer 5 user-programmable thresholds and hysteresis settings. Threshold checking rate also is user-selectable, as are powerful functions such as autozero, data smoothing, and data format selection. In addition, IRIS is a full-featured biaxial inclinometer available with RS232 or RS422 output for easy deployment in a variety of applications. Typical applications include platform level control, avoiding tip-over conditions, and control of solar trackers.
|
|
Tilt switches are used to sense movement (tilt) of a device above and below a horizontal axis. A typical use is in a thermostat. A glass mercury switch is mounted to a bi-metallic spring which expands and contracts with temperature. As the spring moves, the switch contacts pass through the horizontal plane, opening or closing to operate the furnace or boiler. The angle through which the switch must move for proper operation
– the differential angle – is measured from the point of just make to just break; it is specified as a maximum. When selecting a tilt switch, it is important to ensure that the operating mechanism can move the switch through an angle greater than the differential angle. Some additional applications include: level controls, appliances, security alarm systems, toys and games, float switches and water-treatment equipment (non-mercury) .
|
|
The range of switch available from Gentech, with smd, sub miniature and miniature - Form A and From C models.
Switches can be tailored or packaged to match compatible magnets.
Commerical and Professional switching up to 70 watts available.
|
|
|
The Bestact reed element is a highly reliable, broad control range reed switch that when used and implemented in various application products provides a user or manufacturing operation the utmost in uptime and throughput. Its broad control range allows a user to select one switch for any control load from TTL logic to fractional DC horsepower, thereby decreasing the various types of control devices needed for spare parts allocation while ensuring the same reliability levels.
|
|
|
A reed switch consists of two ferromagnetic and specially shaped contact blades (reeds) positioned in a hermetically sealed glass tube with a gap between them and in a protective atmosphere. The plated contact surfaces are isolated from the outside environment, which protects the contacts from contamination. Reed switches are available as form A (normally open) and form C (changeover), and are operated using a magnetic field generated by either a permanent magnet or current-carrying coil. The features that make the reed switch a valuable tool include compact size, low weight, quick response time, long life and low cost. Some common applications are: reed reays, automotive sensors, robotics sensors, security sensors and toys and games. They are also available in moulded packages affording protection from damage and in surface mount styles.
|
|
Features/Benefits:
- Long and soft actuator
- Distinctive tactile feel
- 1.1 & 3 N actuation force
- Ground terminal optional
- RoHS compliant and compatible
|
|
CB (ultra-mini)
6mm Washable Tactile Switches
HP02 (submini)
6mm Tactile Switches
JB (miniature)
Nonilluminated Tactile Switches
JF (miniature)
Nonilluminated Tactile Switches
|
|
Single Axis Programmable Tilt Switch
Part Number 0729-1727-99
+4.5 to 28 Volt Single Power Supply
» ± 45 Degree Sensing Range
» Unidirectional and Bi-directional Open Collector Outputs
|
|
Features:
- Easy to Install, Requires Little Maintenance
- Control Unit Interfaces with Any Tilt Switch Probe
- Advanced Solid State Electronic Circuitry
- NEMA 12 or Optional NEMA 4 Enclosure
- Intrinsically Safe Control Unit available
- Accepts a Wide Variety of Optional Sensors
- Adjustable Time Delay Prevents False Indication
- Rugged Welded Steel Probes
- Optional Stainless Steel Probes Available
|
|
Washable Low Profile Tactile Switches
General description :
Choice of dimensions from PCB to top of cap adds to design flexibility.
Higher operating force type provides more pronounced operating feel.
Dome contact gives crisp tactile feedback to positively indicate circuit transfer and assures high reliability and long life of up to 5,000,000 operations.
Rubber seal construction prevents contact contamination and allows automated soldering and washing.
Slanted terminals provide a spring type action which ensures secure mounting and prevents dislodging during wave soldering.
Molded-in terminals are part of the sealed construction which allows automated soldering and washing.
Terminal spacing conforms to standard 2.54mm PCB grid.
|
|
General description :
Photo interrupter, rather than contacts, ensures high reliability.
Sealed construction for protection from environmental elements, including hydrogen sulfide, sulfur dioxide, and nitrogen hydroxide. Terminals are made of ammonia-resistant materials.
Totally sealed body allows process compatibility for time-and money-saving automatic soldering and cleaning.
Space-saving compact dimensions allow high density mounting.
Internal steel ball movement allows functionality of 360° circumference rotation.
The DSB series switch is well-suited to meet product safety concerns due to normally closed (on) status.
Crimped terminals ensure secure mounting and prevent dislodging during wave soldering.
The switch is triggered when tilted beyond ±30° of the horizontal.
|
|
SHT-1:Digital time switch clock 1-channels weekly
* it is used to control various appliance in dependance on real time , in daily, weekly, monthly, yearly or up to 2099
* switching: according the program (AUTO)/constantly manually, manually to next program change/random (CUBE)
* “Holiday program”: season selection option, when the device will not switch according the standart program, but will be blocked
* automatic conversion summer / winter time
* sealable cover of front panel, easy controlling via 4 buttons
* 100 memory places, clear LCD display, min. interval 1 s
* supply voltage: AC 230 V or AC/DC 12-240 V
* cyclic output
* pulse output
* SHT-1, SHT-3: one channel version, 2-MODULE, DIN rail mounting, clamp terminals
* SHT-1/2: two channel version, 2-MODULE, an individual program can be run on each channel
|
|
Honeywell's military grade construction switches are environment and hermetically sealed switches and switch assemblies that meet military specifications, combining maximum sealing, high temperature capabilities, and rugged, heavy duty, corrosion-resistant construction. Standard and miniature versions are available.
Best Used For:
Harsh environments such as are found in aerospace, transportation, ordnance and marine applications.
|
|
The pressure wave technique is mainly used as entrapment protection on public transportation doors and generally as door opening system.
Additional applications are in the sanitary area.
|
|
Operation Switches
Switches for operation that achieve comfortable operation. Wide lineup of sizes and shape variations.
Turquoise Snap Switches
Super-miniature switch for operation that stands up to harsh environments.
AJ1 (J1) Type Switches
Designed to be as compatible as possible with other switches.
AJ2 (J2) Type Switches
Ideal for minute signal switching with gold-clad contacts.
|
|
TB 100 Series
Panasonic Brand Time Switches have been utilized worldwide to provide the benefits of Panasonic Electric Works Corporation of America/Matsushita Electric Works' quality and innovative designs. The TB100 Series products are user friendly, extremely durable and provide the opportunity to save valuable energy dollars in a wide array of applications:
- Interior/Exterior Lighting
- Heating/Ventilating Systems
- Sign/Display Lighting
- Pool Heaters
- Signal Systems
- Fans
- Conveyors
- Air Conditioners
- Filters
- Pumps
- Refrigeration
- And Many Others!
|
|
| ... products without technical information |
| |
|
|
