|
|
|
|
|
|
High Strength Zinc Alloy Model BL
This model’s holder made of high strength-zinc alloy is connected in perpendicular to the ball shank. With grease pockets provided on the top and bottom of the spherical area, this model achieves high lubricity and high wear resistance.
High Strength Aluminum Alloy Model BL-A
The holder is connected in perpendicular to the shank, which comprises a male thread specially welded with a highly accurate steel ball.With a grease pocket formed on the top and bottom of the spherical area, this model achieves high lubricity and high wear resistance.Use of the A-1 alloy in the holder significantly reduces the weight
Female Threading Holder Model RBI
With this Link Ball model, the high strength zinc alloy is used in its holder and the mounting bolt and the holder are arranged on the same axis, allowing this model to receive both a compressive load and a pulling load. Since grease is contained in the boot, this model achieves high lubricity and high wear resistance.
|
|
|
The most economical linkage option. Avoid the loose fit of pinned connections with a ball joint linkage. Offered in a wide range of styles from the basic staked to a hardened housing and snap ring assembly for increased wear and strength. Quick disconnect versions as well as plastic ball joints are also available. Steel version are available with rubber dirt shields to offer added protection against the environment.
|
|
Ball joints serve as linking and guiding elements for movable parts and create corner joints. These parts from component suppliers can significantly simplify mechanical construction, be used to transfer power in offset axles, transmit movement and are indispensable in all mechanical operations such as cushioning, drawing, tilting, levering, etc.
mbo Osswald always keeps a large number of ball joints out of his product palette of more than 12,000 parts in stock. In addition to the DIN 71802 ball joints which consist of DIN 71805 housings and DIN 71803 ball studs, every possible variation is ready to be called up by the customer. There is also a choice of surface protection such as, for example, blank, galvanised zinc, steel or stainless-steel versions.
For problematic environmental conditions (dust, lubricants) there are special ball joints with sealing caps available. The programme is extended with axial joints.
|
|
Housings, ball studs and Co. are as various in their geometry, appearance and construction as the ideas of the designers.
There are standard parts in every possible size, construction and material composition available for most applications. As one of the leading German specialist for linking elements, mbo Osswald always keeps a large number of ball studs and housings out of his product palette of more than 12,000 parts in stock.
|
|
Sealmaster® Y-Stud
* Accommodates up to ± 25 degrees of angular misalignment in any direction and provides linkage assembly advantages
* Manufactured from carbon steel and plated for corrosion protection
* Hex wrench flat facilitates assembly
* Available on TR/TRE, TR-N/TRE-N, CFF/CFM, CFF-N/CFM-N, CTFD/CTMD rod ends bore sizes from 3/16" to 3/4"
|
|
Housings, ball studs and Co. are as various in their geometry, appearance and construction as the ideas of the designers.
There are standard parts in every possible size, construction and material composition available for most applications. As one of the leading German specialist for linking elements, mbo Osswald always keeps a large number of ball studs and housings out of his product palette of more than 12,000 parts in stock.
|
|
Track rollers are self-retaining, single or double row units with particularly thick-walled outer rings. These bearings can support axial forces in both directions as well as high radial forces. The bearing outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where there is misalignment in relation to the raceway and edge stresses must be avoided. The track rollers are available with an inner ring, with a stud and with a plastic tyre on the outer ring.
|
|
rod end housing:
forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized
inner ring:
ball bearing steel, hardened, superfine ground
lubrication:
Polyrex EP2 or soap complex
temperature range
-20 °C to +120 °C
lubrication nipple:
DIN 3405 D1/A (sizes 1/4 to 3/8)
DIN 71412 H1 (sizes 1/2 to 1/1)
bearing clearance:
15 - 40 µm radial
tolerances:
view
|
|
| ... products without technical information |
| |
|
|
|
|
The Retsch high-speed Planetary Ball Mill PM 100 pulverizes and mixes soft, medium-hard and even extremely hard, brittle and fibrous materials. The PM 100 is a single-station unit suitable for jars from 12 ml to 500 ml. Both wet and dry grinding is possible. The Planetary Ball Mill can be used successfully in almost every field of industry and research, particularly where the requirements for purity, speed, reproducibility and fineness are very high.
The Planetary Ball Mill produce extremely high centrifugal forces with very high pulverization energies which results in short grinding times.
Product Advantages:
extreme speeds for particularly high final fineness
up to 50% higher energy input
grinding jar volumes from 12 ml to 500 ml
suitable for long-term trials and continuous use
safe and stable operation
reproducible results due to energy and speed control
10 combinations of grinding parameters can be stored
graphics display and ergonomic 1-button operation
automatic grinding chamber ventilation for grinding with solvents
2-year warranty, CE-conforming
|
|
|
Ball mills are the most effective laboratory mills for batch-wise, rapid comminution of medium-hard to very hard samples down to the finest particle sizes. The grinding can take place dry or wet. Grinding sets of many different materials are available. The mills can also be used for mixing and homogenisation.
|
|
|
|
|
|
As extension of the existing classic line Planetary Mills, FRITSCH offers a completely new dimension of high-tech milling with the new FRITSCH premium line: The grinding bowls sunk into the disk enable for the first time to achieve revolutionary rotation speeds of up to 1100 rpm at acceleration 95 times that of gravity. The result: significantly shorter grinding times and the finest possible grinding results down to the nano range.
FASTER, SIMPLER AND SAFER THAN EVER.
- Revolutionary rotational speeds of up to 1100 rpm
- Ultrafine grinding results down into the nano range
- Finer grinding results in shorter time
- Sensational centrifugal accelerations of up to 95 times the force of gravity
- 150% greater energy application than conventional Planetary Mills
- For the first time, the bowl and lid form a single unit – no additional tensioning, no incorrect operation!
- Extremely easy grinding bowl change in a second with just two motions
- Grinding bowls position themselves and snap securely into place
- The bowl mountings rotate automatically into a convenient position for handling
- Automatic check of the locks in the mill
- Blockage in the event of impermissible operating states
- Automatic parameter check performed before every grinding, guarantees exact reproducibility
- Via USB, Bluetooth and Ethernet all data can be easily exported to save time
FRITSCH Planetary Mills premium line are ideally suited for loss-free grinding down to a fineness as small as 100 nm. The grinding can be performed dry, in suspension or in an inert gas as well as for mixing and homogenising emulsions and pastes or for mechanical activation and alloying.
|
|
Planetary ball mills are characterised by very fast and effective comminution. They have a wide range of applications. Ideal for lossless comminution down to extremely high levels of fineness < 0.1 µm. The grinding can take place dry, in suspension or under inert gas, depending on the application. They are also well suited for mixing and homogenising emulsions and pastes or for mechanical alloying in materials research.
As extension of the existing classic line Planetary Mills, FRITSCH offers a completely new dimension of high-tech milling with the new FRITSCH premium line: The grinding bowls sunk into the disk enable for the first time to achieve revolutionary rotation speeds of up to 1100 rpm at acceleration 95 times that of gravity. The result: significantly shorter grinding times and the finest possible grinding results down to the nano range.
|
|
|
In combination with a milling system APS the laboratory dissolver DISPERMAT® changes into a closed, discontinuously operating bead mill. The system is simply adapted to the corresponding dissolver via the dissolver shaft or the adapter flange. The DISPERMAT® can be used as a dissolver as well as a bead mill.
|
|
Nano-Bead mill DISPERMAT® SL-nano for milling quantities from 100 ml
The bead mill DISPERMAT® SL-nano is a closed, horizontal operating nano bead mill with a high power input and extremely low clearance volume for for circulation and pass procedure.
A distinguishing mark for the Nano mill is:
* High grinding stock production due to pneumatic press out system
* Extremely small milling beads from 0.1 – 0.3 mm
* C-control with extensive process control
* Data interface for documentation & analyse
* Excellently suitable for research, development and quality assurance
* Compact design and very easy to clean
* High reproducibility of the dispersions
* Scale up: easy transmission from laboratory results to production scale
* Modular design: a modification to larger beads is possible at any time
|
|
Metric and Imperial Ball Screw Jacks designs in translating and rotating screw formats in upright or inverted types are available in capacities up to 500kN ( 50 Ton). 2 gear ratios and 2 screw leads as standard, Options include Pre-loaded ball nut, Anti-rotation (keyed), 6 mounting options including trunnion and double clevis.
The Metric Ball Screw jacks have the extra advantage of an integral safety device as standard.
|
|
For applications requiring linear movement, SIPCO offers a complete line of TechnoMotion® products. Please contact us for questions regarding our linear movement products, our inventory, or specific applications.
LINEAR ACTUATORS-ACME and Ball Screw
SCREW JACK-ACME and Ball Screw
BELT DRIVE-Precision Belt Pulleys
PRECISION BALL SCREWS-Ground, zero backlash
BALL SCREWS-Rolled Design
|
|
Ball Screw Jack.
Stainless Steel execution available.
Capacities from 1 Ton to 30 Ton.
Stroke on request.
Body with Base or Pivoting feature.
Upright or Inverted Screw.
Translating or Rotating Screw.
Motor applications.
|
|
|
|
|
|
Joyce/Dayton - Established 1873
Joyce Ball Screw Jacks feature a ball nut with integral ball bearings that recirculate along the surface of the ball screw. The significantly reduced friction between the ball nut and screw results in greater efficiency, with up to 2/3 less input torque required to move the load than a similarly rated machine screw jack.
Compared to Machine Screw Jacks, Joyce Ball Screw Jacks
- Require less motor horsepower
- Allow higher travel speed
- Provide an extended duty cycle
Joyce Ball Screw Jacks are available in translating screw or rotating screw (keyed for traveling nut) designs. Translating screws are available with threaded, load pad, clevis or plain ends. Options include limit switches, encoders, geared potentiometers, direct drive and reducer mounts, and protective boots. Joyce Ball Screw Jacks are ideal for single or multiple jack systems.
Unlike Machine Screw Jacks, Ball Screw Jacks are not self-locking. Because they will lower under load, a brake motor or other external braking mechanism is required.
|
|
Nook ActionJac Worm Gear Screw Jacks are mechanical actuators that utilize a bronze worm gear with a screw.
Nook offers a complete line of standard and custom engineered ball screw and machine screw actuators for applications from 1/4 ton up to 100 tons. Standard configurations including upright or inverted units with translating or rotating lifting screws. Top plate, threaded, or clevis ends are available for meeting specific application needs. Actuators can be used individually or in mutliple jack arrangements for a larger mechanical system.
|
|
| ... products without technical information |
| |
Ideal for conveying or working areas, allowing the movement
of items in any direction. Standard sizes feature optional adjustable
legs and also different conveying media to suit all applications:
- Omnitrack Ball Transfers for high load capacity applications and low coefficient of friction
- Omnifloat Ball Castors for sheet materials where instantaneous change of direction is not essential
- Omnisweep brushes for delicate support of lightweight items where coefficient of friction can be compromised
|
|
|
count with balls steel 15,8mm where 25,4mm allowing to facilitate the transfer of the loads (cases, paperboards, flat-bottomed plastic vats) starting from 470 HT the meter ² (balls assembled on structure steel 30/10ème the step of 150mm
|
|
Multi-direction moving of loads.
Handling table made of steel balls for loads up to 60 kg/m.
Produced according to your dimensions.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
