|
|
|
|
|
|
Since the creation and patenting of the original DualVee® wheel in 1967, it continues to provide easy to use, easy to install guide wheel components and assemblies. DualVee is ideal for a wide array of applications, from the clean room to the sawmill. These rugged yet economical guide wheels are quiet, ideal in long length applications, and tolerant of harsh environments.
DualVee's recirculating elements are self-contained and isolated from the environment; rolling contact between the wheel and track sweeps debris aside, making it ideal for use in contaminated environments.
DualVee offers three different wheel options; original guide wheels, studded guide wheels, and new integral one-piece guide wheels for lower cost and ease of installation. A wide variety of bushings and journals are available.
DualVee single edge or double edge track with patented mounting shoulder is available in carbon steel or stainless steel, induction hardened or "as formed". Hardened track comes in single lengths up to 20 feet, unhardened in lengths up to 22 feet. Track is easily butt-jointed for longer length applications.
A number of accessory items are also available including wheel covers, lubricators, track plate assemblies and wheel plate assemblies.
|
|
A highly effective system for lower cost and accuracy builds up from a single edge track and matching wheels. DualVee components are available in a range of sizes to suit most applications with high temperature and vacuum/clean-room options available to complement existing stainless steel components.
- Track lengths up to 6m with unlimited lengths achievable by butting
- Available drilled or un-drilled to minimise additional engineering
- Ex-stock availability
|
|
Guide roller with threaded rod
- Profile in arc of circle for fonctionnemenî on tree
- Lubricated with life and tight
- Composed of a roll of the dice with two oblique lines
- Fixing of the roller by its threaded rod
- Exist in standard version (ref.: FRW) or with eccentric (ref.: FRWE)
- Also Exist in lNOX (ref.: FRW... - VA.FRWE... - GOES)
Another products available:
|
|
PRESSURE ROLLER BEARINGS
These are stainless steel radial bearings with Urethane rubber fixed by special processing on its outer ring to keep its rotation accuracy. Under the proper radial loading, the coefficient of friction and hardness of rubber are useful for handling paper or for carrying mechanisms, guide bearings and idle bearings.
Size range from 3x10x4 to 6x24.5x5 mm
2 shields, Nippon NIGACE Grease lube.
E-Mail sunil@bocabearings.com
|
|
- Rotated parts of the rollers are in polyurethane 90° Sh. A equiped with a double lip dust seal.
- Stainless steel or other connection desgins will be considered on request.
|
|
Super-finished raceways of the Modern Linear guide rollers offer superior performance to competitors' product. Smoother raceways translate to smoother and quieter operation in linear applications.
Modern Linear guide rollers are designed to replace existing rollers in linear applications. They are dimensionally equal to existing Dual-Vee and Schatz guide wheels. Our rollers incorporate a 90 degree groove angle and will run on existing track.
Compression resistant plastic rollers can be used with adapter bushings and aluminum rail.
|
|
Series: FTH
15 - 100 kg
Guide rollers with Blickle Extrathane® polyurethane tread
Series: FSTH
45 - 245 kg
Guide rollers with Blickle Extrathane® polyurethane tread, steel wheel centre
|
|
|
|
|
|
YTGW Guide Wheels are the main components of the Linear Motion system, they can be widely used in the industrial robot, cutting machine, motion track, production flow and so on.
The surface of outer ring is the "W" profile formed by the two "V" with an angle of 90 degrees. The internal or external side face can be matched separately with the concave or protrudable track that both have a "V' profile with the angle of 90 degrees, and also the internal side face can be matched well with the cylindrical track.
Wheels feature the internal design of double row angular contact ball bearing and a thick-walled outer ring, so the wheels can accommodate higher loads.
Wheels are made of the high-quality bearing steel, processed by heat treatment and precision grind, and are filled with a long service life, high-grade and multi-purposes grease. Wheels mantle the metal shield or rubber seal (suffix X) to prevent the dust. YITONG also can provide the wheels with the concentric or eccentric bushings, as well as the wheels made from the corrosion resistance stainless steel.
|
|
VCC's LCS Series Litepipe® provides display panel moisture seal and 180° viewing angle. This lens and Litepipe® unit was developed to provide moisture sealing and dust control for display panels when the LED is attached to a circuit board.
Currently, the moisture sealing of a Litepipe® to a display panel requires the use of RTV-type adhesive. When applying glue for sealing, special precautions must be taken to avoid creating air gaps that would allow sealed joints to leak. Glues are not only difficult to apply but their adhesion to a lightpipe surface will change the flow of the light pattern. This also causes light leakage resulting in reduction of light emitted by the litepipe. In addition, the output surface of a lightpipe alone whether flat, concave, or convex projects little or no sidelight. This gluing method results in serious assembly problems and less than satisfactory panel displays.
|
|
|
Illumination from 360˚ produces a uniform light. These light guides are optimum for CCD camera and microscope inspections.
|
|
Flexible Light Pipes
Flexible Light Pipe Assembly
Flexible Light Pipe IP67 Watertight Lens Assembly
Flexible Light Pipe Infrared Lens Assembly
Flexible Light Pipe Lens
Flexible Light Pipe Through-Hole Assembly
Flexible Light Pipe SMD LED Assembly
Rigid Light Pipes
90 ° Multi-level SMD Style
Panel Mount Light Pipe Rear-Mount
Panel Mount Light Pipe Front Mount
Panel Mount Light Pipe Dual Lens Style
90 ° Variable Centerline SMD
Vertical Board Mount Round SMD
Vertical Board Mount Rectangular SMD
|
|
| ... products without technical information |
| |
|
|
|
|
Rockline® RBP1 Belt Positioner
The Rockline® RBP1 Belt Positioner™ is the simple, reliable solution for problem belts that continuously mistrack to one side of the conveyor. The Belt Positioner works on the return side belt using simple angled rollers mounted in a fixed position to quickly and continuously funnel the belt into the correct path.
The RBP1 Belt Positioner’s innovative design does not rely on a pivoting mechanism to move and steer a wandering belt like conventional tracking units. The RBP1’s two idler rollers are adjusted to the belt and create a funneling action that continuously "positions" the belt into the correct path. Many times in as few as 5 revolutions of the belt the results can be seen. Plus, the idler rollers on the RBP1 make smooth contact with the return side belt’s bottom cover and not on the belt’s edges which can cause excessive wear and damage to the belt.
Installed before the tail pulley, the Belt Positioner keeps the belt centered at its critical loading point. The RBP1 can also be used at the head pulley, before or after the take-up pulley or anywhere on the return beltline where there is a belt tracking problem. It can also be used on reversing belts.
The RBP1 Belt Positioner comes assembled and ready to install. Simply preset the unit for the conveyor structure width, position the unit on the belt and bolt or weld in place. Adjust the rollers to the belt and watch the results.
|
|
|
|
|
|
Rockline® RMC1 Skirt Clamps provide the cost-effective solution to material spillage problems in your conveyor loading zones. A good material containment system at the loading point reduces conveyor problems and saves cleanup costs. It stops material loss, eliminates safety hazards and reduces wear and premature failure of conveyor components. RMC1 Skirt Clamps are designed for easy installation, quick maintenance and years of service.
RMC1 Skirt Clamps come in a standard 4" (1200mm) length. An optional "Limited Space" (LS) model is available for tight chute configurations or for portable equipment. Also offered is a "Pick-A-Length" (PAL PAK) option for longer length or special length requirements. The RMC1 handles a variety of skirt rubber sizes. It can also be used with a range of skirt rubber thicknesses from 5/16" (8mm) to 3/4" (19mm).
The RMC1 features a no-hassle installation with few parts. First the clamp pins are positioned on the conveyor's skirt board and welded into place. Then the clamp plates are hung on the pins and the clamp bar and the skirt rubber are inserted. And finally, the clamp bar is tack welded to the plates.
All installation and maintenance work can be done safely from the sides of the conveyor. Just tap loose the locking wedges on the clamp pins, reposition the skirt rubber and relock the pins. The rest of the parts interlock so when the pins are unlocked, they remain in place supporting the skirt rubber while maintenance is completed.
|
|
The automatic adjustable product guiding system provides a flexible way to add fast width adjustment for conveyors in a production line.
The system offers quick and easy automatic resetting of product guiding systems in production flows. The effect is increased line efficiency and safe product distribution throughout the line.
The system has a modular design and consists of guide units for the guiding, controls for the control of the guide units and junction boxes for power supply. The system can be linked to the line control system and one control box can control up to 220 guide units.
|
|
| ... products without technical information |
| |
|
ERNI offers the industry's widest array of cable housings, strain reliefs and guide elements. These complementary items to the DIN 41612 / IEC 60603-2 connector family are available for all of the popular types including B, C, D, F, H, Q and R and 1/2 sizes. The cable housings offer rear and two sided exit options, with strain relief for wire, jacketed cable or flat cables. The guide elements are available with keying and screw lock features for applications including: edgecards, backplanesm front panel, rear panel and other 19" Eurocard subrack mounting applications
|
|
- TCG - Card Guide, Tension Series
- TRCG - Card Guide,Tension Series
- RCGH - Caard Guide,Tension Series
- RCG - Card Guide Series
- RN - Card Guide,Narrow Series
- RDC - Card Guide,Deep Series
- RSDC - Card Guide Series
- RSFS - Card Guide Series
- ACGC - Card Guide,Adjustable Series
- PCG - Card Guide, 4 Ft Series
- BMS-S - Card Guide,Single Sided Series
- RSSHG - Card Guide,Horizontal Series
|
|
Card Guides & Pullers
Richco’s pullers are designed to solve difficult insertion and extraction problems associated with removing large PCB’s and tight gripping multi-pin edge connectors. Our pullers use a cam in/out action enabling leverages of up to 4:1. Ease of use, installation and protection from undue stress for damage-free insertions and extractions of PCB’s, components, and connectors are the main benefits from the use of our pullers. Passivated stainless steel spring pins as per MIL-P-10971 are provided with certain ejectors. Richco pullers have been designed to meet the increasing need to support PCB’s mounted in a vertical position in order to save space. Our wide selection accommodates various board sizes and allows for paired mounting and gang or tandem mounting. The use of standard fasteners simplifies mounting.
|
|
Chain-guide: EP 1000 (PE-UHMW) green is a thermoplastic material with a very high molecular weight, whose main features are:
- a good wear resistance
- a low coefficient of friction
- a very low permeability
- an excellent resistance to the chemical agents
- a low unit weight
- an application temperature between -50°C/+ 70 °C
Beyond the EP 1000, we propose also other type of EP who can be used, on request,
for special applications: EP 1000 black (same characteristics as the green); EP 1000 naturalness
(same mechanical characteristics as the green, standards FDA); Anti-static EP 1000 black; EP 1000 charged
oil...
Other matters: If the application does not allow the use of the PE1000, we can carry out the parts
with following materials: Polymerized Pa 6, POM, PTFE, e.a.
Characteristics:
- Profile in EP 1000 - color green
- Available of stock in length 2 m
- Available in length up to 6 m (on request)
- Other dimensions and matters on request.
|
|
|
Thanks to a very large product range, an unceasing commitment to innovation, and extremely high quality levels, SEDIS is able to satisfy the requirements of the most demanding users
|
|
| ... products without technical information |
| |
|
|
|
|
Today, “intelligent” robots are fitted with environment understanding means and capable of modifying their behaviour to perform the requested task.
Machine vision belongs to these means : it is the robot eye.
EDIXIA realized many robot guidance applications in two major use classes of robots: parts handling and assembly.
Parts handling concerns transfer or parts positioning operations.
Assembly concerns automatic assembly of parts. High precision measurements
Robustness and reliability
Easy calibration
Use domains
Parts handling and assembly
in matrix trajectory repositioning:
for piercing
for glazing assembly (windscreen, back window, rear quarter panel, cielo)
for sunroof assembly
for seats assembly
for dashboard assembly
for doors assembly (door, hood, tail gate, trunk)
for part gripping in suspended tray conveyors
for weldings scan on vehicle for quality inspection
for part presence absence scan on vehicle
in robot thermal repositioning:
for robotized assembly in absolute measurement
for robotized assembly in relative measurement
in inspection:
for gap and flush measurement
for welding scan on vehicle for quality inspections
for part presence absence scan on vehicle
|
|
|
Guiding units with or without centric roll adjustment and single roll guides.
|
|
|
|
see the results for the following category : 
