|
|
MOTOR SERIES - MT6
UNIDIRECTIONAL SYNCHRONOUS MOTORS - 600 RPM
Application - Instrumentastion, diamond machinery, peristaltic pumps,motorised displays, programming devices, cam timers, medical equipment.
Design - MT6 is a unidirectional synchronous motor. The direction of the motor is either cw or ccw which is fixed with help of reversing stopper while manufacturing. This non reversing device also guarantees at all times starting in the desired direction with high starting torque. The motor consists of a cylindrical sheet iron stator which form the poles. Mounted on the hardened and
highly polished rotor shaft is a high coercitivity sintered magnet ring around whose circumference 10 poles of alternate polarity are disposed, Special version of motor without the non reversing device is also available. In this case the motor can start in any direction. Motor can be priovided with screw
clip for fixing.
|
|
MOTOR SERIES - MTR7a/ D7a
REVERSIBLE SYNCHRONOUS MOTOR - 250 RPM
Application - Reversible power drive for actuators, pumps, label printing
machines, medical and optical equipment, office machines, automatic vending machines, machine automation
Design - The MTR7a/ D7a reversing synchronous motor with parmanent magnet rotor is electrically reversible and due to its unique stator design it is moderately priced. The rotating field is produced with a phase-shift
capacitor and double-stator with coils thus ensuring extremely quiet
running. Long life is guaranteed by the robust design (sintered bronze
bearings; self-centering type). The MTR7a/ D7a is operated with singlephase AC current. The same motor version can be used at 50Hz and 60Hz.
|
|
MOTOR SERIES - MTR3a/3b
Reversible Synchronous Motor - 250/ 500 RPM
Application - Recorders, Instrumentation, Diamond machinery, Valve Actuators, Light displays, Textile machinery, Medical equipment, Air conditioning & refrigeration, Dampers, Peristaltic Pumps, Dosing Pumps, Vending machines CCTV Camera positioning, any timing and positioning Application.
Design -
MTR3a/ 3b reversing synchronous motor is of the permanent magnet type with two
stator windings, for single phase AC 50/60 Hz. Phase displacement of the
excitation current is achieved by connecting a capacitor in series with one of the stator windings. The sense of rotation is determined by the resulting
circular rotating field. Electrial reversal of the sense of rotation is effected by means of a single-pole changeover switch. The 24/ 12 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings. Motor can be provided with mounting plate / screw clip for fixing.
|
|
MOTOR SERIES - MTR8c
REVERSIBLE SYNCHRONOUS MOTOR - 375 RPM
Application - Reversible power drive for actuators, pumps, label printing
machines, medical and optical equipment, office machines, automatic vending machines, machine automation.
Design - The MTR8c reversing synchronous motor with permanent magnet rotor
is electrically reversible and due to its unique stator design it is
moderately priced. The rotating field is produced with a phase-shift capacitor and double-stator with coils thus ensuring extremely quiet running. Long life is guaranteed by the robust design (sintered bronze bearings; self-centering type). The MTR8c is operated with single- phase AC current. The same motor version can be used at 50Hz and 60Hz Various windings of motor are available that are tailored to specific requirements. Only some types are listed.
|
|
MOTOR SERIES - MTR9a/ 9b/ 9c/ 9d
REVERSIBLE SYNCHRONOUS MOTOR - 1000 RPM
Application - Reversible power drive for special purpose m/cs, actuators, pumps, label printing machines, medical and optical equipment, vending machines etc.
Design - The MTR9a/9b/9c/9d reversing synchronous motor with parmanent magnet rotor
The rotating field is produced with a phase-shift capacitor and doublestator
with coils thus ensuring extremely quiet running and smooth operation. Long life is ensured by the ball bearings. Compared to normal parmanent magnet synchronous motor that operates on tin can principle, these motors are more
efficient. At same time the temperature rise is significantly higher
in this motor. MTR9a/9b/9c/9d is operated with single-phase AC current. The same motor version can be used at 50Hz and 60Hz.
|
|
MOTOR SERIES - MTR5
REVERSIBLE SYNCHRONOUS MOTOR - 500 RPM
Application - Recorders, Instrumentation, Diamond machinery, Valve Actuators, Light displays, Textile machinery, Medical equipment, Air conditioning &
refrigeration, Dampers, Peristaltic Pumps, Dosing Pumps, Vending machines CCTV Camera positioning, any timing and positioning Application.
Design - MTR5 reversing synchronous motor is of the permanent magnet type with
two stator windings, for single phase AC 50/60 Hz. Phase displacement of
the excitation current is achieved by connecting a capacitor in series with
one of the stator windings. The sense of rotation is determined by the
resulting circular rotating field. Electical reversal of the sense of rotation is effected by means of a single-pole changeover switch. The 12 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings. Motor can be provided with Mounting plate/Screw clip for fixing.
|
|
MOTOR SERIES - MTR4a/ 4b/ D4b
REVERSIBLE SYNCHRONOUS MOTOR - 250/ 500 RPM
Application - Valve Actuators, Light displays, Textile machinery, Medical equipment, Air conditioning & refrigeration, Dampers peristaltic Pumps , Dosing pumps, Vending machines, CCTV Camera positioning, any positioning Application.
Design - MTR4a/ 4b/ D4b reversing synchronous motor is of the permanent magnet type with
two stator windings, for single phase AC 50/60 Hz. Phase displacement of
the excitation current is achieved by connecting a capacitor in series with
one of the stator windings. The sense of rotation is determined by the
resulting circular rotating field. Electical reversal of the sense of
rotation is effected by means of a single-pole changeover switch. The 24 /12 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings. Motor can be provided with Mounting plate/ Screw clip for fixing.
|
|
Features:
- Microprocessor based design with large LCD displays Conductivity or TDS or Salinity and Temperature simultaneously..
- Rugged design with splash proof housing for handheld or bench top use, neckstrap for ¡°hands-free¡± operation.
- Automatic Temperature Compensation(ATC) and degree ¡æ/¨H switchable.
- Simple to calibrate by one button, 3 ranges of standardizing solution are necessary for the automatic calibration recognition procedure.
- Memory function stores and recalls up to 25 points. MAX/MIN and data Hold.
- Low battery and consumption indicator. Auto shut off after 10 minutes of non use, but except status at MAX/MIN mode.
|
|
Conductivity meter, model 9792, is used for online measurement of electrolytic conductivity of various solutions (e.g., in a boiler plant or water purifier).
* Compact DIN96 size and lightweight
* Universal power supply 90 VAC to 264 VAC, 50/60 Hz
* Specific conductivity and temperature are viewed simultaneously.
* Temperature compensation is calculated with high precision by the microcomputer.
* Temperature measurement ranges from –5°C to 120°C.
* Cell constant adjustment is available and easy to perform when cells are changed.
* Two set-points can be selected freely within the measurement range.
|
|
Features:
- Rugged design for handheld or bench top use, neckstrap for "hands-free" operation.
- Large 3-1/2 digit LCD built into adjustable "flip-up" cover.
- Wide measuring range from 10 to 19,990 uS/cm for conductivity or 10 to 19,990 ppm for TDS.
- Calibrate for changes in cell constants via a cell adjust.
|
|
The pH meter, model 9794, is used for online measurement of pH of various solutions, (e.g., in a boiler plant or a water purifier).
* Compact DIN96 size and lightweight
* A wide selection of calibration standard solution (five types) is available. Temperature compensation is provided for various solutions.
* Automatically detects stability of electrode output, with constant and accurate standard solution calibration.
* The transmission output span can be set with a maximum and minimum pH range of 2 pH or wider. The output range can be freely set in units of 0.1 pH.
* Detects pass/fail in electrode characteristics
* Temperature compensation is provided for various solutions.
* In maintenance mode, ST-BY on the LCD lights up, and the meter holds the immediately preceding transmission output and turns off the adjustment output contacts. This prevents false alarms.
* Provided with upper- and lower-limit adjustment contacts, with limits set to any point within the measurement range
|
|
Features:
- Rugged design for handheld or bench top use, neckstrap for "hands-free" operation.
- Large 3-1/2 digit LCD built into adjustable "flip-up" cover.
- Wide measuring range from 10 to 19,990 uS/cm for conductivity or 10 to 19,990 ppm for TDS.
- Calibrate for changes in cell constants via a cell adjust.
|
|
Features:
- Microprocessor based with splash proof housing.
- Large LCD built into adjustable "flip-up" cover. Simultaneous display pH and Temperature.
- Rugged design for handheld or bench top use, neckstrap for "hands-free" operation.
- Automatic or manual temperature compensation. °C/°F switchable
- Simple to calibrate by one keyboard for 5 points buffer, calibration value can be adjusted as needed.
- Memory stores and recalls up to 20 points. Min/Max storage and recall. (PP-206 only)
- Indicate percentage of slope (PTS) after calibration.
- Low battery and consumption indicator.
- Auto shut off after 10 minutes of non use.
|
|
Feature:
- Microprocessor based for fast and accurate measurements.
- Special viewing angle designed of waterproof housing IP 67 rated.
- Large LCD display pH or Conductivity and Temperature Simultaneously.
- Simple to calibrate by one keyboard and automatic temperature compensation.
- Multi-functions with Data-hold, Max/Min and shows PTS after calibration.
- Low battery and consumption indicator. Auto power shut off after 10 minutes of non use.
- Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
|
|
|
|
|
|
-Combined Welding- and Cutting Torches
hand grip for normal hoses
welding attachment in 9 sizes from 0,2 to 25mm welding range
tubular welding attachment in 4 sizes from 1 to 9mm welding range
more-flame-attachment in 4 sizes from 4,0 to 19mm heating range
cutting attachment with concentric nozzles and wing or lever operation for
cutting oxygen valve and cutting ranges from 3 to 300mm
a hole cutting torch from 3 to 50mm cutting range
and sets (assortments) of different compositions in a steel storage case.
-Soldering torches – air inlet by torch insert
The programme contains different hand grips, welding torches, welding heads with extension tubes and different compositions - sets – as well as soldering irons.
Sets are assortments of various hand grips and inserts for different applications like soldering, brazing etc.
-Propane - Oxygen
Set for heating
Heating torches
Cutting torches
Cutting torches with concentric nozzles
-Propane/Accessories
Pressure regulators for propane
Small-Propane-gas bottles
Double hose
Distributors
Pressure propane hoses
Detachable hose tails
-Pressure Regulators for bottled gases DIN EN ISO 2503
Single-stage pressure regulators
Two-stage pressure regulators
Pressure regulators with volume meter Single- and two-stage
|
|
IF - IntelliFlow Water Saver
IntelliFlow is designed to monitor the water coolant circuit in a resistance welding application. This computer controlled product can detect "cap off" conditions, display the flow rate, and display the water temperature.
- Detect and shut off water when the cap comes off
- Monitor and display coolant flow rate
- Monitor and display coolant temperature
- Monitors both supply and return coolant circuit
|
|
| ... products without technical information |
| |
MOTOR SERIES - MTS8c
STEPPER MOTOR
Application - Instrumentation, Diamond machinery, Valve Actuators, Medical equipments, CCTV Camera positioning ,any timing and positioning Application , Printing devices , Fax machines etc.
Design - MTS8c Stepper motor is of the permanent magnet type with step angle as 11.25 degree only with bipolar winding for dc supply which when connected with the driver circuit provides controlled max RPM of 375 & any fraction of the step angle . The 16 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings which ensures longer continuous running life . Motor can be provided with Mounting plate/Screw clip for fixing.
|
|
MOTOR SERIES - MTS3a/3b
STEPPER MOTOR
APPLICATION - Instrumentation, Diamond machinery, Valve Actuators, Medical equipments, CCTV Camera positioning ,any timing and positioning Application , Printing devices , Fax machines etc.
Design - MTS3a/3b Stepper motor is of the permanent magnet type with step angle as 7.5/ 15 degree including bipolar aswellas unipolar winding for dc supply which when connected with the driver circuit provides controlled max RPM of 250/ 500 & any fraction of the step angle . The 24/ 12 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings which ensures longer continuous running life . Motor can be provided with Mounting plate/Screw clip for fixing.
|
|
MOTOR SERIES - MTS7a/ D7a
STEPPER MOTOR
Application - Instrumentation, Diamond machinery, Valve Actuators, Medical equipments, CCTV Camera positioning ,any timing and positioning Application , Printing devices , Fax machines etc.
Design - MTS7a/ D7a Stepper motor is of the permanent magnet type with step angle as 7.5 degree including bipolar aswellas unipolar winding for dc supply which when connected with the driver circuit provides controlled max RPM of 250 & any fraction of the step angle . The 24 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings which ensures longer continuous running life . Motor can be provided with Mounting plate/Screw clip for fixing.
|
|
MOTOR SERIES - MTS5
STEPPER MOTOR
Application - Instrumentation, Diamond machinery, Valve Actuators, Medical equipments, CCTV Camera positioning ,any timing and positioning Application , Printing devices , Fax machines etc.
Design - MTS5 Stepper motor is of the permanent magnet type with step angle as 15 degree including bipolar aswellas unipolar winding for dc supply which when connected with the driver circuit provides controlled max RPM of 500 & any fraction of the step angle . The 12 pole rotor which has a steel shaft polished to a mirror-finish rotates in sintered bronze bearings which ensures longer continuous running life . Motor can be provided with Mounting plate/Screw clip for fixing
|
|
QMot QSH4218
Description
42mm bipolar 2-phase hybrid stepper motor (NEMA17)
These two phase hybrid stepper motors are optimized for microstepping and give a good fit to the TRINAMIC family of motor controllers and drivers. They are also used in the 42mm PANdrive family.
|
|
PANdrive PD-013-42
Description
42mm stepper motor with integrated driver, low cost
The PD-013-42 is a full mechatronic solution including a 42mm flange motor (NEMA17). It joins a convenient controller electronic with a range of different motor torques. The PD-013-42 offers three motor torques options and can be controlled via an optical isolated Step/Direction interface. The power supply, interface and the multi purpose I/Os can be connected with small JST connectors. The firmware of the module can be updated via the serial interface. With the integrated StallGuard feature it is possible to detect overload and stall of the motor.
|
|
|
|
see the results for the following category : 
