|
|
Mounting size: 60mm, 80mm and 90mm
Output power: 20, 40 and 90W
Speed range: 100 - 2000r/min
Max. permissible torque: up to 68Nm
Gearheads: 8 different gear ratios of 1:5 - 1:200
Power supply: 200-230V AC
Marking: CE, UL and cUL
Constant torque over the whole speed range.
Available types: Round shaft type, parallel shaft gear type, flat gear type.
|
|
STALL TORQUE:
10 to 600 Nm
POLARITY:
12, 24, 30 poles
RATED SPEED:
200 - 300 - 400 - 500 - 1000
INSULATION CLASS:
F
DEGREE OF PROTECTION:
IP65
MOUNTING:
IM B5
MAIN FEATURES:
high torque density and high performance
CE certification
cURus certification
OPTIONS:
feedback by encoder/resolver (Heidenain, Stegmann, Tamagawa)
hollow shaft
frameless
water cooled
|
|
Direct drive Dividing Apparatus TA Sk 50:
Rotational axis for dividing in machine tools or other processing machines. Due to the direct drive implemented in this machine far higher r.p.m. rates can be achieved than as with comparable worm driven devices. Work pieces can thus for instance be treated by cylindrical surface grinding. The drive is absolutely free from any play or float.
|
|
Motors - Rexroth IndraDyn S
MSK Series
This series offers complete scalability, with performance options for standard and more challenging applications. The compact construction with increased torque density provides a costomer-orriented range of size and performance.
MKE Series
For extreme environmental conditions, such as enameling plants or in the chemical industry, Rexroth provides MKE motors with various types of explosion protection including explosion-proof models. From 0.9 to 48 Nm continuous torque, a number of different motor sizes are available.
|
|
|
Presto Pallet Stackers are ideal for servicing pallet racks. They are more economical and easier to use than conventional fork lifts. With over 40 models to choose from and a wide variety of available options, there's sure to be a Presto Pallet Stacker to meet your needs.
|
|
The changing pallet truck
Everybody knows how to move pallets using a pallet truck. Lifting them to a height of 800mm is also nothing new.
A pallet truck fitted with a work platform, ramp and roll stop in order to carry out assembly, maintenance and repair of small machines such as lawn mowers, pumps etc makes the truck really useful.
A platform made of aluminium tear plate fitted with a ramp makes it possible to drive directly onto the truck which can then be raised to the desired height. The ramp can then be used as a roll stop.
The work platform is independent of the pallet truck which is simply pushed under the platform and locked into place. The platform and truck are just as easily separated.
The complete program for GRUSE products can be found under www.gruse.de.
|
|
FUTEK's Rotary Torque Sensor - Square Drive with Encoder offers a unique solution for torque auditing applications. The TRD305 Rotary Torque Sensor - Square Drive
with Encoder is available in a wide capacity range and utilizes strain gauge technology.
For those who are a looking for a complete system solution, FUTEK can provide both signal conditioned displays or our VCal Portable System. FUTEK's VCal Portable System brings an easy-to-use system verification directly to the customer making it ideal for on-site verification and calibration of your products. FUTEK TRD Series is also available with TEDS / IEEE1451.4 option.
|
|
| ... products without technical information |
| |
saia motor controller
Caractéristiques :
• logiciel destiné au développement, au test et à l’optimisation de systèmes de moteurs pas à pas
• logiciel fonctionnant sous Windows
• logiciel simple d’utilisation
• réglage rapide des paramètres
• visualisation de la vitesse et de la position
• courses de positionnement
Dimensions (mm) :
Boîtier en métal 160 x 100 x 30 (euro-PCB)
Pilote : pour moteurs polaires et bipolaires
Tension d’alimentation (V/CC) : de 3 à 55 V/CC – 24 V/CA
Alimentation du moteur:
tension constante et courant continu (commandé par hacheur)
Mode de pas : pas entier, demi-pas et micro-pas
Source d’impulsion : interne, programmable
Entrées de commande :
• 3 entrées numériques
• 4 sorties signal
• 1 entrée analogue 0 … 10 V/CC
• contact à relais
Configuration : RS 232, USB
|
|
|
PMD's motion control Developer's Kits are integrated board and software packages available to designers who need to do electro-mechanical and software design using PMD's motion processors. These motion control developer's kits include the surface mount card, interconnection cables, a full set of manuals, and a CD-ROM containing PMD's powerful Pro-Motion GUI and C-Motion to simplify development.
|
|
The development kit DVK90109 has been developed by Melexis to create specific applications using 125 kHz protocols and to evaluate the advantages of the MLX90109 transceiver IC.
The DVK90109 results of the combination of the development board DVKRFID and the evaluation board EVB90109. The EVB90109 is plugged on the DVKRFID through a 10 pins connector (including Coil, VCC and Ground) and controlled by the microcontroller ATMEGA128.
A set of commands has been elaborated by Melexis to define the communication between the Computer and the evaluation board EVB90109.
Other products available:
|
|
The Fixturlaser PAT will be the final solution to all your belt alignment needs
With the Fixturlaser PAT, you are never in doubt on whether your belt transmissions are aligned or not. By using the groove as reference, you will achieve a precise alignment which reduces belt wear, bearing failures and vibrations.
The Fixturlaser PAT comes with two line laser transmitters, each equipped with two spring loaded guides which fit into the pulley grooves. The Fixturlaser PAT is equipped with various sized removable guides to fit standard sheave sizes A-E (6 mm - 40 mm). Additional guides for alignment of timing belts are avilable as accessories.
The use of two laser transmitters with integrated targets, makes it very easy to find out what kind of alignment that is required. Parallel offset, angular error and twist are instantly visible to the operator. Within a few minutes, the operator can determine if the machine requires alignment or not.
The alignment process is as easy as the mounting. Just turn on the lasers and look at the opposite mounted unit. The laser draws a line on the target label as in the illustration below. If necessary, adjust your machine position until the laser lines are aligned with the centre mark on both units.
|
|
Pinpoint accuracy with latest laser technology:
- Aligns grooves of the pulley rather than its face, allowing the alignment of pulleys of unequal width or with dissimilar faces - even fits applications where the pulley face cannot be used as a reference
- No trial and error. The laser position indicates the nature of misalignment allowing easy and accurate adjustment
Versatile and user-friendly:
- Powerful magnets allow fast and easy attachment
- Easy-to-use, requires no special training to operate
- Facilitates simultaneous adjustment of tension and alignment
- V-guides facilitate the alignment of a wide range of V-belt pulleys
Special side adaptor allowing alignment of multi-ribbed and timing belt pulleys as well as chain sprockets is available as accessory
A maximum operating distance of 6 meters (20 ft), makes it suitable for use in various applications
Sturdy aluminium housings provide great assembly stability and accuracy
Supplied in sturdy, light-weight carrying case for portability
|
|
|
No more wire, no more string, no more straight edges. Belt alignment becomes a one-person job with the powerful L80 line laser. 100% billet aluminum construction-not plastic! Mount the laser on the drive unit and cast a line to the driven pulley. The laser line hits the magnetic targets on the driven pulley and the alignment becomes visual, you can see the results. No training and reduced man-power with superior results-now that's a solution! Visit our website for complete specifications.
|
|
| ... products without technical information |
| |
Materials
Wetted parts AISI 316 Internal cartridge phenolic graphite as standard Internal cartridge Special Carbon w/Sic Brgs. Bracket aluminium / WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to a 3m3/h Total delivery heads up to 13bar Temperature Ratings up to 200°C Pressure rating up to PN 25
Construction
Sliding vane pump for general applications Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system TOP-TOP connections with integrated by-pass
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
| ... products without technical information |
| |
Drive-in racking is ideal for homogeneous products with low levels of turnover and a high number of pallets per article type. This system offers the highest use of available space in terms of both area and height.
Advantages:
- Maximum use of available space (85%).
- Elimination of aisles between the racking.
- Rigorous entrance and exit control.
- Drive-in racking can generally accommodate as many article types as there are loading aisles.
Two management systems are available: the drive-in system, with only one access aisle, and the drive-through system, with access to the load from both sides of the rack.
The system is frequently used in cold stores (refrigeration and freezing) which require maximum use of space for the storage of products in a controlled temperature.
Drive-in racking can also be used in construction of clad-rack buildings whose most striking feature is that they do not require the existence of a building prior to construction.
|
|
| ... products without technical information |
| |
|
A DDL motor is basically a rotary motor that is laid out flat and directly coupled to the driven load. With this configuration, all mechanical transmissions, such as ball/lead screws, rack and pinions, belts/pulleys, and gearboxes are eliminated. This in turn eliminates backlash and other problems associated with these mechanical transmissions. DDL designs deliver exceptional high performance, extremely high stiffness, very high dynamic speeds and accelerations, high positional accuracy, higher throughput, compact mechanical assembly, smooth, error-free motion, zero maintenance, and quiet operation.
|
|
Ready-to-mount Linear Motion Systems
Multiple Axis Motion Systems CMS
Designed for a wide range of applications – running from materials handling technology to light-duty machining jobs in the aluminum, wood and plastics sectors – Rexroth offers its ready-to-mount Linear Motion Systems with a variety of drive configurations and control systems.
Our product range of Linear Motion Systems:
- Linear Motion Slides
- Linear Modules
- Compact Modules
- eLINE Compact Modules
- Precision Modules
- Bridge Modules
- Feed Modules
- Ball Rail Tables
- Controllers, Motors, Accessories
- Linear Actuators
Multiple Axis Motion Systems CMS
These standardized, harmonized axis systems that are preset at source save users a tremendous amount of development and start-up effort.
3D CAD Drawing Generator
Use our 3D CAD generator to configure PSK and CKK Modules and CMS Systems.
|
|
·Linear motors synchronous MLP/MLS with forces d’ jusqu’ advances; to 25000 NR
·Speeds jusqu’ with 600 m/min
·Liquid cooling (thermo-encapsulated)
Advantages:
·Weak undulation of force
·High density of force (compactness)
|
|
| ... products without technical information |
| |
|
