|
|
Mounting size: 60mm, 80mm and 90mm
Output power: 20, 40 and 90W
Speed range: 100 - 2000r/min
Max. permissible torque: up to 68Nm
Gearheads: 8 different gear ratios of 1:5 - 1:200
Power supply: 200-230V AC
Marking: CE, UL and cUL
Constant torque over the whole speed range.
Available types: Round shaft type, parallel shaft gear type, flat gear type.
|
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 30Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 110/115V AC or 220/230V AC
Marking: CE, UL and cUL
|
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 20Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 200 - 230V AC or 100 - 115V AC
Marking: CE, UL and cUL
|
|
STALL TORQUE:
10 to 600 Nm
POLARITY:
12, 24, 30 poles
RATED SPEED:
200 - 300 - 400 - 500 - 1000
INSULATION CLASS:
F
DEGREE OF PROTECTION:
IP65
MOUNTING:
IM B5
MAIN FEATURES:
high torque density and high performance
CE certification
cURus certification
OPTIONS:
feedback by encoder/resolver (Heidenain, Stegmann, Tamagawa)
hollow shaft
frameless
water cooled
|
|
Direct drive Dividing Apparatus TA Sk 50:
Rotational axis for dividing in machine tools or other processing machines. Due to the direct drive implemented in this machine far higher r.p.m. rates can be achieved than as with comparable worm driven devices. Work pieces can thus for instance be treated by cylindrical surface grinding. The drive is absolutely free from any play or float.
|
|
Motors - Rexroth IndraDyn S
MSK Series
This series offers complete scalability, with performance options for standard and more challenging applications. The compact construction with increased torque density provides a costomer-orriented range of size and performance.
MKE Series
For extreme environmental conditions, such as enameling plants or in the chemical industry, Rexroth provides MKE motors with various types of explosion protection including explosion-proof models. From 0.9 to 48 Nm continuous torque, a number of different motor sizes are available.
|
|
saia motor controller
Caractéristiques :
• logiciel destiné au développement, au test et à l’optimisation de systèmes de moteurs pas à pas
• logiciel fonctionnant sous Windows
• logiciel simple d’utilisation
• réglage rapide des paramètres
• visualisation de la vitesse et de la position
• courses de positionnement
Dimensions (mm) :
Boîtier en métal 160 x 100 x 30 (euro-PCB)
Pilote : pour moteurs polaires et bipolaires
Tension d’alimentation (V/CC) : de 3 à 55 V/CC – 24 V/CA
Alimentation du moteur:
tension constante et courant continu (commandé par hacheur)
Mode de pas : pas entier, demi-pas et micro-pas
Source d’impulsion : interne, programmable
Entrées de commande :
• 3 entrées numériques
• 4 sorties signal
• 1 entrée analogue 0 … 10 V/CC
• contact à relais
Configuration : RS 232, USB
|
|
|
PMD's motion control Developer's Kits are integrated board and software packages available to designers who need to do electro-mechanical and software design using PMD's motion processors. These motion control developer's kits include the surface mount card, interconnection cables, a full set of manuals, and a CD-ROM containing PMD's powerful Pro-Motion GUI and C-Motion to simplify development.
|
|
The development kit DVK90109 has been developed by Melexis to create specific applications using 125 kHz protocols and to evaluate the advantages of the MLX90109 transceiver IC.
The DVK90109 results of the combination of the development board DVKRFID and the evaluation board EVB90109. The EVB90109 is plugged on the DVKRFID through a 10 pins connector (including Coil, VCC and Ground) and controlled by the microcontroller ATMEGA128.
A set of commands has been elaborated by Melexis to define the communication between the Computer and the evaluation board EVB90109.
Other products available:
|
|
The VLT FCM 300 Series is a very compact alternative to the traditional solution with a VLT frequency converter and motor as separate units.
The frequency converter is attached in place of the motor terminal box. It is not higher than the standard terminal box - not wider nor longer than the motor.
|
|
Motor drive with through-going hexagon socket.
- integrated position measuring system
- simple upgrade from manual to motorized solution
- completely damped against vibration and noise by an elastic coupling as well as by several absorbers
|
|
Type A and Type B
The two drive types are controlled by a simple cable remote control with up/down keys. We recommend Type B for high loads. The engine and the control are built into the housing. The transformer (230 VAC, optionally 110 VAC) is attached on the outside of the housing. The cable remote control (2 m cable length) is installed below the table edge at the desired location, and can be pushed under the table top.
Typ C
On drive Type C different heights can be memorized and automatically selected. The memory board also has a digital height indicator. The infrared remote control is available as an alternative to the memory board. The power supply (230 VAC, optionally 110 VAC) is integrated into the control unit. The memory board (2.5 m cable length) is installed below the table edge at the desired location, and can be pushed under the table top.
|
|
Hollow shaft (hex) gear motor. DC motor with worm gear.
- Actuator with integrated distance of travel output
- Simple upgrade from manual to motorized system
|
|
Tritex Series brushless servo-gearmotor with amplifier and control
Frame Size 2 – 3.5 inches, 51 – 89 mm
Maximum Continuous Torque Rating 2078 lbf-in, 235 Nm
Maximum Motor Speed 2500 rpm
|
|
The Sumitomo Cyclo drive is unsurpassed by any other inline drive available in the market today. Cyclo's unique epicycliodal design has advantages superior to speed reducers using common involute tooth gears. Cyclo components operate in compression, not in shear. Unlike gear teeth with limited contact points, a Cyclo has two thirds of its reduction components in contact at all times. This design enables Cyclo speed reducers and gearmotors to withstand shock loads exceeding 500% of their ratings, and provide exceptional performance, reliability and long life in the most severe applications.
Features & Benefits:
- Highest overload capacity, exceeding 500%
- Exceptional life with a 24 month unlimited warranty
- High efficiency, even at high reduction ratios
- Unlike involute gearing, no thermal limits
- Available as inline speed reducer or gearmotor
- Ideal for severe, high shock applications
- Grease lubricated for no maintenance
|
|
Fine Cyclo Speed Reducers are designed for robotic and other very demanding applications. These reducers emphasize zero backlash, extremely small lost motion and very high torsional stiffness to insure the ultimate in positioning accuracy. Because Fine Cyclo is based on the Cyclo speed reduction principals and technology, it withstands high shock loads, and boasts high reduction ratios in a small package.
Features & Benefits:
- High Shock Load Capacity
- Compact Size and High Torsional Stiffness
- Small Hysteresis Loss
- High Efficiencies and Low Vibration
- Multiple Configurations for Application Flexibility
|
|
Uniblock design for foot and flange mounting. Gear case machined on all sides for universal application.
Revolutionary new gearing geometry here and in all the other models results in exceptional running smoothness. For special environmental conditions the gear unit can be fitted with two shaft seals.
|
|
|
The Sumitomo Cyclo drive is unsurpassed by any other inline drive available in the market today. Cyclo's unique epicycliodal design has advantages superior to speed reducers using common involute tooth gears. Cyclo components operate in compression, not in shear. Unlike gear teeth with limited contact points, a Cyclo has two thirds of its reduction components in contact at all times. This design enables Cyclo speed reducers and gearmotors to withstand shock loads exceeding 500% of their ratings, and provide exceptional performance, reliability and long life in the most severe applications.
|
|
|
The Series M gear motor range takes advantage of many years of accumulated design expertise, together with the use of high quality materials and components. The end result is a series of speed reducing and geared motors offering high load carrying capacity, high efficiency, quiet running and reliability.
|
|
The uniblock gear case machined on all sides, the particularly stable case and minimum outside dimensions enable diverse mounting options and applications.
As a result, these motors often form an integral part of our customers’ machine designs. High precision manufacturing and top gearing quality guarantee minimum backlash in Watt Drive gear units.
|
|
|
The Hyponic geared motor is based on 60 years of experience in the development and manufacture of gear and drive solutions. To date there are over a million Hyponic geared motors in service. The latest generation is characterized by a more compact design, a modular system, maintenance-free operation and universal installation positions. With the IP65 (wash down) option, the Hyponic is an ideal solution for beverage bottling plants and food manufacture. Hypoid gearing technology in case hardened steel, patented by Sumitomo, provides high efficiency and is far superior to the customary worm gears due to gear ratios from 5:1 to 1440:1. The Hyponic gear combines the cost advantages of the worm gear with the technical characteristics of a bevel gear.
|
|
The Sumitomo Hyponic gearmotor represents 60 years of excellence in the design and manufacture of premium gearing solutions. With over one million Hyponics currently in service, the newest model features a more compact, modular housing, maintenance-free grease lubrication, and high efficiencies. Options include C-Face configurations and gearmotors. With washdown duty as a standard option, Hyponic is the ideal choice for bottling, bakery, and food processing industries. Sumitomo's patented all-steel hypoidal gear technology is extremely high-performance and exceptionally more efficient than worm gearing across ratios from 10:1 to 240:1.
Features & Benefits:
- Patented Hyponic gear technology is up to 90% efficient across all ratios and requires no cooling fan
- Offset, all-steel hypoid design transmits torque more efficiently for more torque per unit in a smaller, more compact size
- Grease lubrication is trouble-free, with no oil to change or maintain
- Compact and lightweight design in an aluminum, corrosion resistant housing with optional washdown protection
- Optional plug-in shaft and bolt-on feet afford multiple mounting configurations
- Hollow bore makes installation and retrofit quick and easy
- Extremely quiet, smooth operation is ideal for commercial use
- Two-year warranty
- Optional popular bore sizes available from stock: 1 3/16", 1 7/16", 1 15/16", 2 3/16"
|
|
Due to the unique combination of newly developed worm wheel material with special lubricants, extreme precision and optimized shapes, this powerful motor achieves comparatively high levels of efficiency and torque. The case machined on all sides enables diverse mounting options.
Double-chamber shaft seals made of HNBR are used as standard, guaranteeing complete leak tightness.
|
|
With MOTOX we offer both a modular geared motor range and a comphrensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
With MOTOX we offer both a modular geared motor range and a comprehensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
With MOTOX we offer both a modular geared motor range and a comphrensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
