|
|
Mounting size: 60mm, 80mm and 90mm
Output power: 20, 40 and 90W
Speed range: 100 - 2000r/min
Max. permissible torque: up to 68Nm
Gearheads: 8 different gear ratios of 1:5 - 1:200
Power supply: 200-230V AC
Marking: CE, UL and cUL
Constant torque over the whole speed range.
Available types: Round shaft type, parallel shaft gear type, flat gear type. |
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
Power supply: 24 V DC
Marking: CE, cUL
With microstep driver.
Standard type
Mounting size: 42 mm and 60 mm
Max. permissible torque: up to 1.66 Nm
High-Torque type
Mounting size: 20, 28 and 42 mm
Max. permissible torque: up to 0.42 Nm
High-Resolution type
Mounting size: 28, 42 and 60 mm
Max. permissible torque: up to 2.3 Nm
Geared types:
Taper hobbed gear: max. holding torque up to 4 Nm, permissible torque 0.2 Nm - 4 Nm, backlash 0.167° - 1°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 8 Nm, permissible torque 0.2 Nm - 8 Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 8 Nm, permissible torque 3.5 Nm - 8 Nm, 2 gear ratios of 1:50 and 1:100.
|
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 20Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 200 - 230V AC or 100 - 115V AC
Marking: CE, UL and cUL |
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 30Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 110/115V AC or 220/230V AC
Marking: CE, UL and cUL
|
|
QuickStep is a new series of integrated step motors from JVL. They are available in a wide range, offering various functionality and combinations. The basic unit is a high-torque step motor with flange dimensions of 57x57 mm (NEMA23). The housing is constructed to provide IP55 or better protection. One or more PCBs and various connectors can be mounted in the housing to provide the various models. Among the many features can be mentioned:
•Pulse/direction driver.
•Serial RS485 position controller with graphical programming.
•Point-to-point or multiaxis operation up to 255 axes on the same RS485 bus.
•Canbus, CANopen 402 or Devicenet optional.
•Optional magnetic encoder.
•8 IO that can be configured as input, output or 10bit analog input
•Electronic gearing.
•High speed position capture.
•MAC motor protocol so that MAC motors and QuickStep motors can be connected to the same RS485 bus.
•Commands for simple PLC/PC set-up and communication.
•Power supply 12-48V DC delivering high torque at high speed.
•1.1Nm, 1.6 Nm, and 2.5 Nm versions.
•Fixed 1600 pulses/revolution for version with built-in position controller.
•200, 400, 800, 1000, or 1600 pulses/revolution for versions with pulse/direction inputs. |
|
If you are looking for a way to simplify the process of controlling your stepper motor take a look at
Lin Engineering's Silverpak C. This integrated motor and controller is designed to allow for rapid implementation of stepper motors requiring automation.
Features:
• 2.0 Amp chopper (PWM) driver
• Operates from 12V to 40V
• RS232 or RS485 based communications
• Stand alone operation with no connection to a PC
• Single 4 wire bus linking up to 16 step motors
• Up to 256 microstep resolution
• Fully programmable ramps and speeds
• Two digital I/O and two fixed input channels
• Software selectable “Move” and “Hold” currents
• Hold current automatically selected upon move completion
• Up to 85 oz-in of holding torque
|
|
IclA IFS (with fieldbus interface) and IclA IDS (with pulse/direction interface) are fitted with three-phase stepper motors. These motors provide high torque at low speeds. This drive is highly suitable for speed drive applications requiring excellent constant velocity characteristics, but also for high-resolution positioning tasks. Commissioning of the stepper motor drive is easy because controller setting is not required.
Special features:
High continuous torque
Excellent constant velocity characteristics
High positioning resolution (0.018°)
Optionally with holding brake (IFS9x only)
Optionally with planetary gear |
|
Standard type
Mounting size: 60mm - 85mm
Max. permissible torque: up to 6.3Nm
Power supply: 200 - 230V AC
Marking: CE, UL and cUL
Microstep driver.
Also available with electromagnetic brake.
Low noise and low vibration.
Driver with vibration control circuit to dramatically reduce vibration over the whole speed range.
Energy-saving mode (only with electromagnetic brake).
Geared type
Mounting size: 60mm - 90mm
Taper hobbed gear: max. holding torque up to 12Nm, permissible torque 0.35Nm - 12Nm, backlash 0.167° - 0.75°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 37Nm, permissible torque 0.8Nm - 37Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 37Nm, permissible torque 3.5Nm - 37Nm, 2 gear ratios of 1:50 and 1:100.
Power supply: 200 - 230V AC
Marking: CE, UL and cUL |
|
• Integrated Bipolar 1.8° Step Motor with Driver/Controller
• NEMA Size 17 Frame
• Holding Torque of up to 85 oz-in
• Input voltage of 7 to 28 VDC
• Output currents of 0.1 to 1.5 Amps Peak
• Step resolution of full step, 2x, 4x, 8x, and 16x microstepping
• Maximum speed of 250 kHz
• Up to 16 MHz of Step Clock Frequency
• Two digital limit switches, left and right
• One general purpose input (digital or analog)
• One open collector output capable of outputting 100mA
• Low power dissipation – no heat sink required
• Stand alone operation with no connection to PC
• Incorporated with TMCL Programming Language
• Up to 16 kBytes of Memory (2048 TMCL commands)
• Programmable settings for acceleration and velocity profiles
• Control commands such as Jump and Subroutines available
• Calculation and compare commands implemented
• StallGuard™ feature available
– capable of detecting a stall without encoder
• RS485 communication
• 3 stack lengths available |
|
Characteristics of the ML 1 linear motors
- direct drive with uniform, linear force
- particularly suitable for positioning and feed movements of high dynamics and high accuracy, e. g. in: handling and assembly systems, packaging machinery, electronics production machinery
- compact size
- low weight
- ironcore versions with low attractive forces or ironless without attractive forces and cogging
- high acceleration (up to 2 kN peak force)
- high speed, up to 20 m/s
- high dynamics and accuracy in combination with high-resolution optical encoders
- motor length as required since secondary part (magnetic plate) consisting of elements
- also available as complete linear direct drive consisting of coil unit, magnetic plate, incremental encoder, and guides |
|
| NSK motors are high precision, high speed positioning units. NSK has carried megathrust and megatorque motor lines in the past. NSK now offers only the PS Series Megatorque Motor; all other motors have been discontinued. NSK will continue to support and provide information on all motors. |
|
Direct drive Dividing Apparatus TA Sk 50:
Rotational axis for dividing in machine tools or other processing machines. Due to the direct drive implemented in this machine far higher r.p.m. rates can be achieved than as with comparable worm driven devices. Work pieces can thus for instance be treated by cylindrical surface grinding. The drive is absolutely free from any play or float. |
|
Fast positioning with high resolution.
Pollux is a very compact motion control system
preferential used in high precision positioning
applications.
The very smooth running characteristic is one of the
outstanding feature of this system.
Test it´s optimized cost/performance ratio.
Features:
· positioning resolution up to 600.000 Steps/rev.
· use of physical units (mm/s; mm/s²)
· smallest calculated step size = 1nm
· dynamic speed and acceleration range
- 0.1µm to 40mm/s with spindle pitch=1mm
- 1mm/² to 20m/s²
· holding torque up to 10Nm (with gear)
· positioning commands with abs. or relative coordinates
- or velocity and direction
· programmable move to the limits
· 1Vpp high res. Closed Loop Interface
· optimized motor power consumption
· daisy chain capability, up to 16 devices
· RS-232 interface
· CAN-Bus interface
· ASCII command language (Venus-2)
· Box version available:Controller and motor separately
· rugged connector version available (Pollux industrial)
· plug and play capability |
|
the 2-Phase-Step Motors SECM24..., SECM26... and ECM26... Series and the 5-Phase-Step Motors SECM56... and SECM59... Series are available with Encoder. The Specification of the Encoder is as follows:
2-Phase-Step-Motor:
Output-Signal: TTL or Line-Drive, 200 Counts/Revolution
5-Phase-Step-Motor:
Output-Signal: TTL or Line-Drive, 500 Counts/Revolution |
|
The FHA-C series digital AC hollow-shaft servo actuator, combining precision Harmonic Drive gearing with highly dynamic AC servo motors, offer unique features unsurpassed by conventionally geared drives. Used in highly demanding industrial servo systems they provide precision motion control and high torque capacity in a very compact package. A HIPERFACE® or Siemens compatible encoder with sinusoidal output signals provides feedback information for the FHA Series Actuator with Sine/Cosine Encoder. The actuator is compatible with a wide variety of currently available digital servo drives for Sin/Cos motor feedback systems, e.g. Simodrive 611D/611U, SIMOVERT-MASTERDRIVES or NUM MDLU. Matching SC-610 digital servo control units, which can be used for current, speed or position control are also available.
Advantages:
- Backlash-free precision gear
- Hollow shaft from 18 mm to 45 mm
- Transmission accuracy < 60 arcsec
- Repeatability < ± 6 arcsec
- Sine-commutated AC hollow-shaft motor
- Motor winding for 320 VDC / 600 VDC
- Winding temperature monitoring via temperature sensor
- High capacity and high stiffness cross roller bearing
- Sine/cosine-encoder for use with SIMODRIVE 611D/U and SIMOVERT MASTERDRIVES MC
- HIPERFACE®- encoder for operation with Harmonic Drive® servo controller SC-610 or a variety of further servo controllers (NUM, CT, Danaher Motion, Elau, etc.)
- Good controllability even at low speed
- Compared with the previous FHA-B the new FHA-C series has the following additional features:
- higher maximum torque
- more compact design
- higher torsional stiffness
- higher maximum speed |
|
The PMA-Series DC-Mini servo actuators consist of a Harmonic Drive box in mini or super-mini size combined with a DC servo motor and feedback device. All sizes are available with an incremental encoder. The size 8,11 and 14 are also available with a holding brake, as option. Major features of these actuators are:
Advantages:
- Zerobacklash positioning in low power applications
- Easy adaptation to readily available servo controllers via incremental Encoder feedback
- 12V/24V DL-Power supply
- Combination of DC-mini-motor and precision gear
- Torque range up to 20 Nm
- Speed range up to 180 rpm
- Repeatability about ± 1 arcmin
- Available in 4 sizes with ratio 50:1 - 110:1; with encoder |
|
SERVO-MOTOR FHA-MINI
hollow shaft Mini-servo-motor associating an engine brushless, a coder and a reducer without play HARMONIC DRIVE.
Mini servo-motor cubes with hollow shaft.
There exists in 3 sizes: a cube of 50,60 or 75mm on side.
Benefit produced:
* Most compact of the market: 4,8Nm in a cube of 50mm of with dimensions!
* High dynamics with its engine brushless
* Utmost precision with the reducer with null play HARMONIC DRIVE.
Characteristics produced:
* Vmax up to 200 tr/min,
* Cmax until 28Nm,
* Mini hollow shaft of 6,2 with 13,5mm,
* A cube of 50,60 or 75mm on side,
* Report/ratio of reduction: 30,50 or 100,
* 2 tensions of winding to the choice for a maximum adaptability,
* Hollow shaft, high integration, facility of startup,
Sectors of use:
* Robotics,
* Machine tools,
* Special machines,
* Embarked solutions. |
|
Servo-motor F
Servo-motor associating an engine brushless, a coder and a reducer without play HARMONIC DRIVE
You profit from a bearing from exit to cross rollers and compatibility with the majority of the numerical controls. The servo-motor F is ready with employment.
Benefit produced:
* Utmost precision of the reducer with null play HARMONIC DRIVE,
* Adaptability with the majority of the numerical controls,
* Solution lends to employment,
* Flexibility on the choice of the coder, the brake, the report/ratio of reduction,...
Characteristics produced:
* Couples of exit of 52 with 1.840Nm,
* Modular concept: you select winding, the report/ratio of reduction, the coder and your options,
* High torque, ready with employment and compatible with the majority of the numerical controls.
Sectors of use:
* Machine tools,
* Special machines |
|
| IclA intelligent compact drives consist of a motor and control electronics. The drives are controlled via a fieldbus or a pulse interface. IclA are used as decentralised drives in machine and automation applications. In connection with a motion controller or a PLC, complex automation tasks can be performed in a simple and cost-effective way. Complete function modules are available for easy motion programming with a Schneider Electric motion controller. |
|
| The motors are solidly designed and are maintenancefree for life.The multi-grooved stator contains a threefold winding which, together with the phase-shifting capacitor, creates a symmetrical rotating field at the rated working point of the motor.The rotor is of the squirrel-cage type. Two- or four-pole motors with a variety of design Iengths and diameters provide rated torques from 0.75 to 12.6 Ncm. Can be combined with reduction gear units, brakes, and tachogenerator systems. |
|
The family with success of the drives of FlexiDrive positioning was lately supplemented by a new compact alternative MSIA. This alternative delivers, in discontinuous service, up to 238 W for a depth of assembly of only 245 mm reducing included/understood, and can be equipped with radial or axial connectors of exit.
The systems of drives FlexiDrive MSIA are built on the basis of engine with D.C. current without brushes with integrated positioning control. A multi-turn absolute coder is also integrated, delivering a signal coded on 14 bits per turn, for more than 260.000 turns. The whole is controlled via an interface Profibus DP or Canopen. FlexiDrive is used for the automatic adjustment of the format on the packing machines, of work of wood, paper or metal.
This design "all-in-a" causes to appreciably reduce the costs of engineering and wiring as well as the size of the electrical power boxs. The positional checking of the axis, ensured by a multi-turn absolute coder, guarantees tiny times of preparation and handing-over under operation, even after a total cut of the installation. With this new version, you have a solution of drive requiring even less place than before. |
|
| ... products without technical information |
| |
|
|
