|
|
Standard type
Mounting size: 60mm - 85mm
Max. permissible torque: up to 6.3Nm
Power supply: 200 - 230V AC
Marking: CE, UL and cUL
Microstep driver.
Also available with electromagnetic brake.
Low noise and low vibration.
Driver with vibration control circuit to dramatically reduce vibration over the whole speed range.
Energy-saving mode (only with electromagnetic brake).
Geared type
Mounting size: 60mm - 90mm
Taper hobbed gear: max. holding torque up to 12Nm, permissible torque 0.35Nm - 12Nm, backlash 0.167° - 0.75°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 37Nm, permissible torque 0.8Nm - 37Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 37Nm, permissible torque 3.5Nm - 37Nm, 2 gear ratios of 1:50 and 1:100.
Power supply: 200 - 230V AC
Marking: CE, UL and cUL
|
|
Ezi-STEP can detect the loss-of-synchronization of a stepping motor without the addition of an external sensor.
Utilizing a software damping and filtering method, a high speed actuation is realized by the exciting angle control of a step-angle.
|
|
Type
CRK543AP
Series
5-phase with microstep (CRK-Series) (Standard type)
Technical data
Type
CRK543AP
Frame size [mm]
42
Shaft type
single
Holding torque [Nm]
0.13
Step angle [°]
0.72
RoHS-compliant
yes
|
|
CRK Series, 5-phase with microstep with built-in controller
Power supply: 24 V DC
Marking: CE
With microstep driver.
Standard type
Mounting size: 42 mm and 60 mm
Max. permissible torque: up to 1.66 Nm
Geared types:
Taper hobbed gear:
Mounting size: 42 mm and 60 mm
Max. holding torque up to 4 Nm
Permissible torque 0.35 Nm - 4 Nm
Backlash 0.25° - 0.75°
5 gear ratios of 1:3.6 - 1:30.
|
|
Power supply: 24 V DC
Marking: CE, cUL
With microstep driver.
Standard type
Mounting size: 42 mm and 60 mm
Max. permissible torque: up to 1.66 Nm
High-Torque type
Mounting size: 20, 28 and 42 mm
Max. permissible torque: up to 0.42 Nm
High-Resolution type
Mounting size: 28, 42 and 60 mm
Max. permissible torque: up to 2.3 Nm
Geared types:
Taper hobbed gear: max. holding torque up to 4 Nm, permissible torque 0.2 Nm - 4 Nm, backlash 0.167° - 1°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 8 Nm, permissible torque 0.2 Nm - 8 Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 8 Nm, permissible torque 3.5 Nm - 8 Nm, 2 gear ratios of 1:50 and 1:100.
|
|
The Ezi-SERVO is an Innovative closed loop stepping motor control system that utilized a high-resolution encoder.
The Ezi-SERVO keeps updating the current position every 25 mico-sec using high performance DSP.
The most suitable to Vision System.
|
|
AS Series IP65 Rated Closed Loop Stepping Motors
The AlphaStep is a revolutionary hybrid stepping motor and driver package which eliminates missed steps. The AlphaStep uses a built-in feedback device that constantly monitors the motor shaft position to detect and correct for loss of synchronism.
- IP65 rated motors for dust/water-proof performance
- AC Input
- 2.36 in and 3.35 in frame sizes
- Maximum holding torque from 10.6 lb-in to 35 lb-in
- Permissible speed range from 0 to 4000 r/min
- RoHS compliant
|
|
|
|
|
|
Stepper drives and stepper motors for motion control
Description
Truly Simple
Forget about encoder systems and commissioning software
A compact drive and a high-accuracy motor included in the package
Reference values are preset and monitored by a higher-level PLC or a Schneider Electric motion controller
3-phase stepper motors stand for precision, power and sturdiness
In most cases a gearbox is not required due to the high torque
Extremely Compact
The Lexium SD3 require very little space in the control cabinet
Compact dimensions (H x W x D: 145 mm x 72 mm x 140 mm)
The price is as compact as its dimensions
High Flexibility
Two different power classes, different interfaces and numerous other options and accessories
Available up to 6.8 A
Suitable for mains supply with 1-115 VAC and 230 VAC (50/60 Hz)
Feature a 5 V and a 24 V pulse/direction interface or fieldbus interfaces (CANopen, CANopen Motionbus and Modbus or Profibus DP)
SD3 also available with rotation monitoring (SD3 28 has it on board)
Integrated safety
Safe Torque Off functionality prevents unintended machine starts as per IEC/EN 61800-5-2 for operator safety
The connection to the positioning electronics is retained even when the Safe Torque Off function is active. Re-homing is not necessary
|
|
CFK II Series Stepping Motors
Offering high performance and simple operation in a compact size, the 5-phase CFK II series microstepping driver and motor package is available in both standard and high speed versions. The CFK II series provides unparalleled resolution and low vibration in an open loop system, as well as high torque in the high speed range.
- DC input
- Frame sizes from 0.79 in to 3.35 in
- Maximum holding torque from 0.2 lb-in to 55.63 lb-in
- Permissible speed range from 0 to 4500 r/min
|
|
PMC Series Stepping Motors
The PMC series combines a high torque miniature 5-phase stepping motor with a board-level, credit card sized driver.
- DC input
- 1.10 in frame size
- Maximum holding torque from 0.3 lb-in to 17.5 lb-in
- Permissible speed range from 0 to 2500 r/min
|
|
QMot QSH4218
Description
42mm bipolar 2-phase hybrid stepper motor (NEMA17)
These two phase hybrid stepper motors are optimized for microstepping and give a good fit to the TRINAMIC family of motor controllers and drivers. They are also used in the 42mm PANdrive family.
|
|
PANdrive PD-013-42
Description
42mm stepper motor with integrated driver, low cost
The PD-013-42 is a full mechatronic solution including a 42mm flange motor (NEMA17). It joins a convenient controller electronic with a range of different motor torques. The PD-013-42 offers three motor torques options and can be controlled via an optical isolated Step/Direction interface. The power supply, interface and the multi purpose I/Os can be connected with small JST connectors. The firmware of the module can be updated via the serial interface. With the integrated StallGuard feature it is possible to detect overload and stall of the motor.
|
|
• Integrated Bipolar 1.8° Step Motor with Driver/Controller
• NEMA Size 17 Frame
• Holding Torque of up to 85 oz-in
• Input voltage of 7 to 28 VDC
• Output currents of 0.1 to 1.5 Amps Peak
• Step resolution of full step, 2x, 4x, 8x, and 16x microstepping
• Maximum speed of 250 kHz
• Up to 16 MHz of Step Clock Frequency
• Two digital limit switches, left and right
• One general purpose input (digital or analog)
• One open collector output capable of outputting 100mA
• Low power dissipation – no heat sink required
• Stand alone operation with no connection to PC
• Incorporated with TMCL Programming Language
• Up to 16 kBytes of Memory (2048 TMCL commands)
• Programmable settings for acceleration and velocity profiles
• Control commands such as Jump and Subroutines available
• Calculation and compare commands implemented
• StallGuard™ feature available
– capable of detecting a stall without encoder
• RS485 communication
• 3 stack lengths available
|
|
Available standard or IP65 rated 2-phase stepping motor and DC input microstepping driver in one package. Includes Oriental Motor's proprietary Smooth Drive Function, to easily achieve low-vibration operation.
- DC input - Wide voltage range of 20 to 75 VDC and 4.5 A/phase
- 2.22 in. and 3.35 in. frame sizes
- Maximum holding torque from 4.25 lb-in to 58.125 lb-in
- Permissible speed range from 0 to 4000 r/min
- RoHS compliant
|
|
Type
RBK264T
Series
2-phase with microstep (RBK-Series)
Technical data
Type
RBK264T
Frame size [mm]
56.4
Holding torque [Nm]
0.48
Protection class
IP65
Step angle [°]
1.8
Power supply
20-75 VDC
RoHS-compliant
yes
|
|
| ... products without technical information |
| |
The TFT industrial monitor is a modern concept to replace old or defective CRT's and TFT's mounted in control units CC200, CC220, CC220M, CC300 and CC320 by Bosch (compatible to Hüller Hille, Weiler DU 24 CNC, Trumagraph and Trumpf).
All Units are Made in Germany, using only high quality components. A mechanic housing, similar to the original Unit, makes it easy to exchange in just a few minutes.
The new display is plug&play 100% compatible to Bosch equipment.
TFT-display sizes:
* 10,4" TFT as a replacement for 12" CRT monochrome
* 12,1" TFT as a replacement for 14" CRT color
> MAC2014
|
|
The TFT industrial monitor is a modern concept to replace old or defective CRT's and TFT's mounted in control units 0, 3, 6, 10, 11, 15, 16, 18 und 20 by Fanuc.
All Units are Made in Germany, using only high quality components. A mechanic housing, similar to the original Unit, makes it easy to exchange in just a few minutes.
The new display is plug&play 100% compatible to Fanuc equipment.
TFT-display sizes:
* 8,4" TFT as a replacement for 9" CRT display monochrome
> AL61L-0001-0071
> AL61L-0001-0072
> AL61L-0001-0076
> AL61L-0001-0079
> AL61L-0001-0086
* 8,4" TFT as a replacement for 9" CRT display color
> AL61L-0001-0090
> AL61L-0001-0095 (D9CM-01)
* 10,4" TFT as a replacement for 12" CRT display color
> AL61L-0001-0077
> AL61L-0001-0087
* 12,1" TFT as a replacement for 14" CRT display color
Fanuc:
> AL61L-0001-0074
> AL61L-0001-0094
> AL61L-0001-0096
> A02B-0200-C071
Toshiba:
> D14CM-06A
Hitachi:
> C14C-1472DF
Matsushita:
> TX-1450ABA
|
|
The TFT industrial monitor is a modern concept to replace old or defective CRT's and TFT's mounted in control units M1T, M2, T2, M32T and Fusion by Mazak / Mazatrol.
All Units are Made in Germany, using only high quality components. A mechanic housing, similar to the original Unit, makes it easy to exchange in just a few minutes.
The new display is plug&play 100% compatible to Mazak equipment.
TFT-display sizes:
* 10,4" TFT as a replacement for 12" CRT monochrome
* 10,4" TFT as a replacement for 10,4" display
* 12,1" TFT as a replacement for 14" CRT color
|
|
The TFT industrial monitor is a modern concept to replace old or defective CRT's and TFT's mounted in control units CNC 3460 / CNC 3480 and CNC 3360 by Philips.
All Units are Made in Germany, using only high quality components. A mechanic housing, similar to the original Unit, makes it easy to exchange in just a few minutes.
The new display is plug&play 100% compatible to Philips equipment.
TFT-display sizes:
* 12,1" TFT as a replacement for 14" CRT color
|
|
|
|
|
|
The TFT industrial monitor is a modern concept to replace old or defective CRT's and TFT's mounted in Simatic control units AS 230/235/256, OS 252, AVUS 3/4, COROS LS-C, VDU 200, Cracis, CP 526/527/528/581, MONA S5, MONA-C, Prokon 1/2/3, Teleperm, DS 078, S5 + M, VISRAM by Siemens.
All Units are Made in Germany, using only high quality components. A mechanic housing, similar to the original Unit, makes it easy to exchange in just a few minutes.
The new display is plug&play 100% compatible to Siemens Simatic equipment.
TFT-Display sizes (different configurations are available: open frame / desktop / 19" rack):
* 8,4" TFT as a replacement for 9" CRT
* 10,4" TFT as a replacement for 12" CRT
* 10,4" TFT as a replacement for 10" Display (Toshiba)
* 12,1" TFT as a replacement for CRT-displays with several sizes
> MP40/C36-A
> MP40/C36-B
> PM36-C
> PM36-R
> 6AV5040-1BF12-0BA0
* 15,1" TFT as a replacement for different 9" to 21" CRT color
and CRT PM36-D
* 19" TFT as a replacement for different 9" to 21" CRT color
> 6AV8011-1JE22-0DA0
|
|
The TFT industrial monitor is a modern concept to replace old or defective CRT's and TFT's mounted in Sinumerik control units 810 GA / GA.2, S3, 805, 805M, 820, 820M GA.3, 820T GA.3, 840C, 840D, 840D-PPC, 850, 880, 880G by Siemens (compatible to INDEX C200).
All Units are Made in Germany, using only high quality components. A mechanic housing, similar to the original Unit, makes it easy to exchange in just a few minutes.
The new display is plug&play 100% compatible to Siemens Sinumerik equipment.
TFT-Display sizes:
* 8,4" TFT as a replacement for 9" CRT or 10" CRT
> 3N/MEA1507529
> 6FC3888-5MC
* 10,4" TFT as a replacement for 12" CRT monochrome or color
> 6FC4600-0AR04
> 6FC3561-1AC-Z
> 6FC3801-0AC-Z
> 6FC3261-1AC-Z
> 6FC3988-7AM20
> 6FC3986-3AU (RGB)
> MAM32-12
* 10,4" TFT as a replacement for 14" CRT color
> 6FC5147-0AA17-0AA1
* 10,4" TFT as a replacement for 10,4" display
> 6FC5247-0AA16-0AA1
> LTM10C209A
* 12,1" TFT as a replacement for 14" CRT Monitor color
|
|
Control line - Summary TFT replacement monitors
Replacement monitors for your CNC or SPS control system which have been already adjusted.
|
|
Control line - Summary TFT replacement monitors
Replacement monitors for your CNC or SPS control system which have been already adjusted.
|
|
Control line - Summary TFT replacement monitors
Replacement monitors for your CNC or SPS control system which have been already adjusted.
|
|
Control line - Summary TFT replacement monitors
Replacement monitors for your CNC or SPS control system which have been already adjusted.
|
|
Control line - Summary TFT replacement monitors
Replacement monitors for your CNC or SPS control system which have been already adjusted.
|
|
Control line - Summary TFT replacement monitors
Replacement monitors for your CNC or SPS control system which have been already adjusted.
|
|
Control line - Summary TFT replacement monitors
Replacement monitors for your CNC or SPS control system which have been already adjusted.
|
|
|
|
see the results for the following category : 
