|
|
Standard type
Mounting size: 60mm - 85mm
Max. permissible torque: up to 6.3Nm
Power supply: 200 - 230V AC
Marking: CE, UL and cUL
Microstep driver.
Also available with electromagnetic brake.
Low noise and low vibration.
Driver with vibration control circuit to dramatically reduce vibration over the whole speed range.
Energy-saving mode (only with electromagnetic brake).
Geared type
Mounting size: 60mm - 90mm
Taper hobbed gear: max. holding torque up to 12Nm, permissible torque 0.35Nm - 12Nm, backlash 0.167° - 0.75°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 37Nm, permissible torque 0.8Nm - 37Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 37Nm, permissible torque 3.5Nm - 37Nm, 2 gear ratios of 1:50 and 1:100.
Power supply: 200 - 230V AC
Marking: CE, UL and cUL
|
|
Ezi-STEP can detect the loss-of-synchronization of a stepping motor without the addition of an external sensor.
Utilizing a software damping and filtering method, a high speed actuation is realized by the exciting angle control of a step-angle.
|
|
Type
CRK543AP
Series
5-phase with microstep (CRK-Series) (Standard type)
Technical data
Type
CRK543AP
Frame size [mm]
42
Shaft type
single
Holding torque [Nm]
0.13
Step angle [°]
0.72
RoHS-compliant
yes
|
|
Power supply: 24 V DC
Marking: CE, cUL
With microstep driver.
Standard type
Mounting size: 42 mm and 60 mm
Max. permissible torque: up to 1.66 Nm
High-Torque type
Mounting size: 20, 28 and 42 mm
Max. permissible torque: up to 0.42 Nm
High-Resolution type
Mounting size: 28, 42 and 60 mm
Max. permissible torque: up to 2.3 Nm
Geared types:
Taper hobbed gear: max. holding torque up to 4 Nm, permissible torque 0.2 Nm - 4 Nm, backlash 0.167° - 1°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 8 Nm, permissible torque 0.2 Nm - 8 Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 8 Nm, permissible torque 3.5 Nm - 8 Nm, 2 gear ratios of 1:50 and 1:100.
|
|
The Ezi-SERVO is an Innovative closed loop stepping motor control system that utilized a high-resolution encoder.
The Ezi-SERVO keeps updating the current position every 25 mico-sec using high performance DSP.
The most suitable to Vision System.
|
|
AS Series IP65 Rated Closed Loop Stepping Motors
The AlphaStep is a revolutionary hybrid stepping motor and driver package which eliminates missed steps. The AlphaStep uses a built-in feedback device that constantly monitors the motor shaft position to detect and correct for loss of synchronism.
- IP65 rated motors for dust/water-proof performance
- AC Input
- 2.36 in and 3.35 in frame sizes
- Maximum holding torque from 10.6 lb-in to 35 lb-in
- Permissible speed range from 0 to 4000 r/min
- RoHS compliant
|
|
CFK II Series Stepping Motors
Offering high performance and simple operation in a compact size, the 5-phase CFK II series microstepping driver and motor package is available in both standard and high speed versions. The CFK II series provides unparalleled resolution and low vibration in an open loop system, as well as high torque in the high speed range.
- DC input
- Frame sizes from 0.79 in to 3.35 in
- Maximum holding torque from 0.2 lb-in to 55.63 lb-in
- Permissible speed range from 0 to 4500 r/min
|
|
PMC Series Stepping Motors
The PMC series combines a high torque miniature 5-phase stepping motor with a board-level, credit card sized driver.
- DC input
- 1.10 in frame size
- Maximum holding torque from 0.3 lb-in to 17.5 lb-in
- Permissible speed range from 0 to 2500 r/min
|
|
• Integrated Bipolar 1.8° Step Motor with Driver/Controller
• NEMA Size 17 Frame
• Holding Torque of up to 85 oz-in
• Input voltage of 7 to 28 VDC
• Output currents of 0.1 to 1.5 Amps Peak
• Step resolution of full step, 2x, 4x, 8x, and 16x microstepping
• Maximum speed of 250 kHz
• Up to 16 MHz of Step Clock Frequency
• Two digital limit switches, left and right
• One general purpose input (digital or analog)
• One open collector output capable of outputting 100mA
• Low power dissipation – no heat sink required
• Stand alone operation with no connection to PC
• Incorporated with TMCL Programming Language
• Up to 16 kBytes of Memory (2048 TMCL commands)
• Programmable settings for acceleration and velocity profiles
• Control commands such as Jump and Subroutines available
• Calculation and compare commands implemented
• StallGuard™ feature available
– capable of detecting a stall without encoder
• RS485 communication
• 3 stack lengths available
|
|
Available standard or IP65 rated 2-phase stepping motor and DC input microstepping driver in one package. Includes Oriental Motor's proprietary Smooth Drive Function, to easily achieve low-vibration operation.
- DC input - Wide voltage range of 20 to 75 VDC and 4.5 A/phase
- 2.22 in. and 3.35 in. frame sizes
- Maximum holding torque from 4.25 lb-in to 58.125 lb-in
- Permissible speed range from 0 to 4000 r/min
- RoHS compliant
|
|
Type
RBK264T
Series
2-phase with microstep (RBK-Series)
Technical data
Type
RBK264T
Frame size [mm]
56.4
Holding torque [Nm]
0.48
Protection class
IP65
Step angle [°]
1.8
Power supply
20-75 VDC
RoHS-compliant
yes
|
|
| ... products without technical information |
| |
Description:
The Becker Model VRP-B-CH Double-Acting Pilot provides pressure control when utilized with a double-acting piston actuated control valve. The VRP-B-CH measures process sensing pressure and positions the double-acting actuator to maintain the setpoint. The VRP-B-CH Pilot may be utilized for pressure control applications with setpoints ranging from 1.0 (6.9 kPa) to 1300 psig (8964 kPa). Due to its low-bleed characteristics, the VRP-B-CH is typically utilized when bleed gas must be discharged to atmosphere.
|
|
|
The Becker Model VRP Double-Acting Pilot provides pressure control when utilized with a double-acting piston actuated control valve. The Model VRP Valve Regulator Pilot is the “original” VRP-Pilot and is often referred to as the “VRP Classic.” The VRP measures process sensing pressure and positions the double-acting actuator to maintain the setpoint. The VRP Pilot may be utilized for pressure control applications with setpoints ranging from 1.0 psig (6.9 kPa) to 1300 psig (8964 kPa). The VRP is typically utilized when Bleed to Pressure System (BPS™) may be used to completely eliminate atmospheric bleed emissions. The VRP Classic maintains the simplicity of the original VRP concept with “standard” setpoint accuracy and performance. For higher level of performance and accuracy, the Model VRP-CH Valve Regulator Pilot should be utilized. The VRP Classic is utilized primarily by long-term customers that have a large installed base of the original VRP Pilots.
|
|
Description:
The Becker Model VRP-CH Double-Acting Pilot provides pressure control when utilized with a double-acting piston actuated control valve. The VRP-CH measures process sensing pressure and positions the double-acting actuator to maintain the setpoint. The VRP-CH Pilot may be utilized for pressure control applications with setpoints ranging from 1.0 psig (6.9 kPa) to 1300 psig (8964 kPa). The VRP-CH is typically utilized when Bleed to Pressure System (BPS™) may be used to completely eliminate atmospheric bleed emissions.
|
|
Description:
The Becker Environmentally-Friendly Positioner (EFP Series) is used with pneumatically actuated natural gas control valves to provide an accurate valve stem position that is proportional to the electronic command input signal received from an electronic controller. All Becker EFP’s are rated Explosion Proof Class 1, Div. 1 for use in hazardous locations. The EFP is compatible with all Becker actuators and may be retrofit to most manufacturer's control valve packages as well. The EFP eliminates the need for an I/P transducer and features ZERO bleed consumption at steady state. Additionally, the EFP features easy, solid state adjustment and multiple failure modes to protect your gas pipeline.
|
|
Description:
The RPDA Rotary Piston Double Acting Actuator is designed for heavy duty control applications that require optimum performance. The RPDA is typically utilized when applications require a "lock last" failure mode. The RPDA incorporates a “crank-arm” mechanism specifically designed for the rigors of throttling control valve applications. The RPDA can accept high pressure power supply gas up to 500 psig (3447 kPa) enabling the use of smaller actuators or Becker’s exclusive Bleed to Pressure System (BPS) feature.
|
|
Description:
The RPSR Rotary Piston Spring Return Actuator is designed for heavy duty control applications the require optimum performance. The RPSR is typically utilized when applications require the control valve to “fail open” or “fail closed” upon loss of power supply gas. The RPSR incorporates a “crank-arm” mechanism specifically designed for the rigors of throttling control valve applications. The RPSR can accept high pressure power supply gas up to 500 psig (3447 kPa) enabling the use of smaller actuators or Becker’s exclusive Bleed to Pressure System (BPS) feature.
|
|
SMARTDRIVE TM ECU
For self-propelled machinery
High productivity & safety
Smooth and comfortable driving
Four solutions:
SmartDriveTM Off-Road : electronic solution for traction control systems
SmartDriveTM Master : electronic solution for the management of hydrostatic transmissions
SmartDriveTM Premier : electronic solution for the management of hydrostatic transmissions and for traction control systems
SmartDriveTM Easy : Do-It -Yourself solution for the management of hydrostatic transmissions
|
|
Hydraulic Pilot Control Devices TH
- Used for controlling the working hydraulics in mobile equipment
- Suitable for installation in arm rests (4TH6)
- Sensitive control due to low actuating forces and proportional control behavior
- Various characteristics for optimum matching to the working hydraulics to be controlled
- Raster and reference positions for identifying working positions for the operator
- Maintenance-free, long service life
- Different grip models available
Electronic Pilot Control Devices THE
- Used for controlling mobile equipment
- Similar ergonomics like hydraulic pilot control devices
- Sensitive control due to low actuating forces and proportional control behavior
- Maintenance-free, long service life
- Different grip models available
- Hall sensors
|
|
Hydraulic Pilot Control Devices TH
- Used for controlling the working hydraulics in mobile equipment
- Suitable for installation in arm rests (4TH6)
- Sensitive control due to low actuating forces and proportional control behavior
- Various characteristics for optimum matching to the working hydraulics to be controlled
- Raster and reference positions for identifying working positions for the operator
- Maintenance-free, long service life
- Different grip models available
Electronic Pilot Control Devices THE
- Used for controlling mobile equipment
- Similar ergonomics like hydraulic pilot control devices
- Sensitive control due to low actuating forces and proportional control behavior
- Maintenance-free, long service life
- Different grip models available
- Hall sensors
|
|
|
|
|
|
The power steering controllers are designed to enable and to control the speed of hydraulic (series wound and permanent magnet ) motors used for power steering in industrial vehicles. These controls are used in conjunction hall effect pulse encoders that supply movement inputs from the steering wheel of the vehicle to the controller. The control will start the motor when steering wheel is moved and ramp up the speed of the motor proportionally to the speed which the steering wheel is rotated. If no movement of the steering wheel is sensed after a pre-set time, the control will shut off the motor, to save energy, reduce noise and extend battery life.
- Voltage Range : 24-48VDC and 72-80VDC
- Armature Current Limit : 60 Amps
- One Hour Rating (In Air) : 15 Amps
- One Minute Rating : 35 Amps
- Frequency : Constant 15KHZ
Features and Benefits:
- Variable idle speed available to protect pump
- Variable steer compensation allows the use of custom sensors
- Variable relief enable allows operation without steer sensors
- A stop timer extends battery life
|
|
| ... products without technical information |
| |
The AST-100 is the world's most innovative means of viscosity control. The AST-100 is a versatile instrument that is excellent for customers who are looking for viscosity control (i.e. maintaining the viscosity of the product) in their process more than the measurement of an exact number (ex. 23.5cP). It is easy to install, cleans-in-place, and has no moving parts, so maintenance is minimal. With available options it is suitable for explosion-proof applications or 3A food-grade applications as well.
|
|
MIVI PROCESS VISCOMETER FOR INLINE, ONLINE AND ON REACTOR APPLICATIONS
Simple, Rugged, Reliable, No wear part, Low maintenance, Operates in any position, Easy installation
GENERAL TECHNICAL DATA
• Maximum working temperature up to 200 or 300°C
• Maximum working pressure up to 60 bar or 150 bar (500 possible at request)
• Maximum viscosity range up to 1000 Pascal.second
• Watertightness of the body IP67
• Material 316L SS, Hastelloy, ...
• Protective coatings Diamolith, PTFE, enamel
• Exproof approval ATEX, FM, JIS
• Sanitary design on request
INDUSTRIES :
Petrol, Petrochemical, Chemical, Food & beverage, Cosmetics, Printing & coating
APPLICATIONS :
Polymerization control, Heavy fuel oil control, Inks control...
PRODUCTS :
Oil, Polymers, Fuels, Bitumen, Resins, Gels, Emulsions, Cheese, molasses, Paints, Inks...
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
