|
|
Power supply: 24 V DC
Marking: CE, cUL
With microstep driver.
Standard type
Mounting size: 42 mm and 60 mm
Max. permissible torque: up to 1.66 Nm
High-Torque type
Mounting size: 20, 28 and 42 mm
Max. permissible torque: up to 0.42 Nm
High-Resolution type
Mounting size: 28, 42 and 60 mm
Max. permissible torque: up to 2.3 Nm
Geared types:
Taper hobbed gear: max. holding torque up to 4 Nm, permissible torque 0.2 Nm - 4 Nm, backlash 0.167° - 1°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 8 Nm, permissible torque 0.2 Nm - 8 Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 8 Nm, permissible torque 3.5 Nm - 8 Nm, 2 gear ratios of 1:50 and 1:100.
|
|
The Ezi-SERVO is an Innovative closed loop stepping motor control system that utilized a high-resolution encoder.
The Ezi-SERVO keeps updating the current position every 25 mico-sec using high performance DSP.
The most suitable to Vision System.
|
|
AS Series IP65 Rated Closed Loop Stepping Motors
The AlphaStep is a revolutionary hybrid stepping motor and driver package which eliminates missed steps. The AlphaStep uses a built-in feedback device that constantly monitors the motor shaft position to detect and correct for loss of synchronism.
- IP65 rated motors for dust/water-proof performance
- AC Input
- 2.36 in and 3.35 in frame sizes
- Maximum holding torque from 10.6 lb-in to 35 lb-in
- Permissible speed range from 0 to 4000 r/min
- RoHS compliant
|
|
CFK II Series Stepping Motors
Offering high performance and simple operation in a compact size, the 5-phase CFK II series microstepping driver and motor package is available in both standard and high speed versions. The CFK II series provides unparalleled resolution and low vibration in an open loop system, as well as high torque in the high speed range.
- DC input
- Frame sizes from 0.79 in to 3.35 in
- Maximum holding torque from 0.2 lb-in to 55.63 lb-in
- Permissible speed range from 0 to 4500 r/min
|
|
• Integrated Bipolar 1.8° Step Motor with Driver/Controller
• NEMA Size 17 Frame
• Holding Torque of up to 85 oz-in
• Input voltage of 7 to 28 VDC
• Output currents of 0.1 to 1.5 Amps Peak
• Step resolution of full step, 2x, 4x, 8x, and 16x microstepping
• Maximum speed of 250 kHz
• Up to 16 MHz of Step Clock Frequency
• Two digital limit switches, left and right
• One general purpose input (digital or analog)
• One open collector output capable of outputting 100mA
• Low power dissipation – no heat sink required
• Stand alone operation with no connection to PC
• Incorporated with TMCL Programming Language
• Up to 16 kBytes of Memory (2048 TMCL commands)
• Programmable settings for acceleration and velocity profiles
• Control commands such as Jump and Subroutines available
• Calculation and compare commands implemented
• StallGuard™ feature available
– capable of detecting a stall without encoder
• RS485 communication
• 3 stack lengths available
|
|
Available standard or IP65 rated 2-phase stepping motor and DC input microstepping driver in one package. Includes Oriental Motor's proprietary Smooth Drive Function, to easily achieve low-vibration operation.
- DC input - Wide voltage range of 20 to 75 VDC and 4.5 A/phase
- 2.22 in. and 3.35 in. frame sizes
- Maximum holding torque from 4.25 lb-in to 58.125 lb-in
- Permissible speed range from 0 to 4000 r/min
- RoHS compliant
|
|
Type
RBK264T
Series
2-phase with microstep (RBK-Series)
Technical data
Type
RBK264T
Frame size [mm]
56.4
Holding torque [Nm]
0.48
Protection class
IP65
Step angle [°]
1.8
Power supply
20-75 VDC
RoHS-compliant
yes
|
|
PMC Series Stepping Motors
The PMC series combines a high torque miniature 5-phase stepping motor with a board-level, credit card sized driver.
- DC input
- 1.10 in frame size
- Maximum holding torque from 0.3 lb-in to 17.5 lb-in
- Permissible speed range from 0 to 2500 r/min
|
|
Standard type
Mounting size: 60mm - 85mm
Max. permissible torque: up to 6.3Nm
Power supply: 200 - 230V AC
Marking: CE, UL and cUL
Microstep driver.
Also available with electromagnetic brake.
Low noise and low vibration.
Driver with vibration control circuit to dramatically reduce vibration over the whole speed range.
Energy-saving mode (only with electromagnetic brake).
Geared type
Mounting size: 60mm - 90mm
Taper hobbed gear: max. holding torque up to 12Nm, permissible torque 0.35Nm - 12Nm, backlash 0.167° - 0.75°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 37Nm, permissible torque 0.8Nm - 37Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 37Nm, permissible torque 3.5Nm - 37Nm, 2 gear ratios of 1:50 and 1:100.
Power supply: 200 - 230V AC
Marking: CE, UL and cUL
|
|
Ezi-STEP can detect the loss-of-synchronization of a stepping motor without the addition of an external sensor.
Utilizing a software damping and filtering method, a high speed actuation is realized by the exciting angle control of a step-angle.
|
|
Type
CRK543AP
Series
5-phase with microstep (CRK-Series) (Standard type)
Technical data
Type
CRK543AP
Frame size [mm]
42
Shaft type
single
Holding torque [Nm]
0.13
Step angle [°]
0.72
RoHS-compliant
yes
|
|
The AST-100 is the world's most innovative means of viscosity control. The AST-100 is a versatile instrument that is excellent for customers who are looking for viscosity control (i.e. maintaining the viscosity of the product) in their process more than the measurement of an exact number (ex. 23.5cP). It is easy to install, cleans-in-place, and has no moving parts, so maintenance is minimal. With available options it is suitable for explosion-proof applications or 3A food-grade applications as well.
|
|
MIVI PROCESS VISCOMETER FOR INLINE, ONLINE AND ON REACTOR APPLICATIONS
Simple, Rugged, Reliable, No wear part, Low maintenance, Operates in any position, Easy installation
GENERAL TECHNICAL DATA
• Maximum working temperature up to 200 or 300°C
• Maximum working pressure up to 60 bar or 150 bar (500 possible at request)
• Maximum viscosity range up to 1000 Pascal.second
• Watertightness of the body IP67
• Material 316L SS, Hastelloy, ...
• Protective coatings Diamolith, PTFE, enamel
• Exproof approval ATEX, FM, JIS
• Sanitary design on request
INDUSTRIES :
Petrol, Petrochemical, Chemical, Food & beverage, Cosmetics, Printing & coating
APPLICATIONS :
Polymerization control, Heavy fuel oil control, Inks control...
PRODUCTS :
Oil, Polymers, Fuels, Bitumen, Resins, Gels, Emulsions, Cheese, molasses, Paints, Inks...
|
|
A COMPLETE PRODUCT RANGE suitable FOR ALL INDUSTRIES and especially for PLASTIC INJECTION MOULDING.
- Extended range: the RMI range consists of 5 diameters of couplings from 6 mm to 25mm.
- Safety.
- Minimum pressure drop.
- Reliability and robust construction.
- An excellent flow/size ratio.
- Safe and quick locking.
Select STÄUBLI RMI couplings and take advantage of our know-how!
|
|
|
|
see the results for the following category : 
