|
|
Custom cylindrical tanks and pressure vessels from Allegheny Bradford are ideal for pharmaceutical, biotechnology fine chemical, cosmetics, food processing and other ultra pure manufacturing environments. Our engineering specialists and skilled craftsmen work closely with you to design and fabricate vessels for your individual applications. Whatever your processing needs, from mix and transfer tanks to bioreactors and process vessels, Allegheny Bradford offers the superior quality and personal service you require. To meet our client's growing needs Allegheny Bradford has added new fabrication facilities and upgraded equipment for increased capacity and improves operational efficiency. As a result, we can deliver a wider range of quality tanks, including larger component equipment and process skids, faster than industry standards. We are committed to excellence in designing and manufacturing stainless steel tanks and vessels that meet the highest standards for performance and quality
|
|
Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure. The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure) safety pressure relief cocks and Manual, Rotary or Oscillating agitation types are available to provide the best quality agitation.
Binks Pressure Feed Containers are constructed from the highest grade materials and fully comply with European and Global pressure regulations including PED, ATEX and ASME.
|
|
| Tank made in 304 stainless steel specially designed for suction, transfer and subsequent drainage of liquids, either with or without solid particles in suspension. |
|
PRONAL flexible tanks are ideal for storing and transporting liquids (drinking water, hydrocarbons, chemical solutions, foodstuffs, industrial waste, sludge... ).
They are manufactured with elastomer or plastomer materials, depending on the application, and reinforced with high strength fabric. This is a simple economical solution.
Flexible tanks are used throughout the world and are suitable for thousands of users.
Advantages:
- lightweight,
- compact when folded,
- quick set up,
- no air inside the tank,
- a low-cost solution, no civil engineering required
A highly diversified range of products :
- ground storage up to 500,000 litres,
- can be transported on trucks, pick-ups, boats and aircraft, suspended under a helicopter or towed behind a vehicle,
- structured tanks and ferry fuel tanks for aeroplanes and helicopters, with anti-crash and self-sealing versions. |
|
This storage tank for liquids or powdery products (water reserves, fish-breeding pools, safety sand vat, fertilizer, silo, effluent basin, storage of sludge cake) includes :
- A modular metal frame made out of galvanized steel assembled with bolts suppliers and nuts.
- A tight envelope made out of special polyester imputrescible cloth, coated with 1000 g/m2 PVC and reinforced by 2 welded belts.
The open vat is very light and no compact. It is very easy to clean in case of pollution of water by muds, leaves, sand, etc ... |
|
Tanksline
Ptfe lined columns and tanks in
carbon steel: lining up to 5 mm.
Max 2 mt of diameter.
97/23CE PED |
|
VERTICAL CYLINDRICAL STAINLESS TANK WITH FLAT BOTTOM ON RAFT
> Manufacturer: CHALVIGNAC
> Steel stainless construction304 or 316 L.
> Auto-draining flat bottom with angle of 3%.
> Capacity up to 3000 HL manufactured in the factory - Maximum diameter 5,500 m.
> Dimensions on request.
> Professional fitting of accessories on request.
> Adjusting regulation rings on the ferrule (hot and cold).
THESE TANKS ARE MAINLY USED FOR STORAGE (wine, ...).
See also the products:
- VERTICAL CYLINDRICAL STAINLESS TANK WITH COMPARTMENTS
- VERTICAL CYLINDRICAL STAINLESS TANK WITH FLAT BOTTOM ON SUPPORTS |
|
STORAGE TUNKS WITH LIQUID FERTILIZERS
STANDARD EQUIPEMENT
> Composite material developed from polyester resin and fibreglass obtained by orthogonal filament rolling on horizontal metal moulds.
> Glazed intern surface, smooth extern surface.
> Blowhole Ø 160 PVC.
> 2 handling rings.
> 1 oval hermetically-sealed stainless door - 310 X 420.
> 1 cock with total stainless pulling ball DN 50 on square strap 100 X 100.
> Graduation of 10 m3 in 10 m3 with intermediary index.
> Predisposition for fixation on ground.
> 1 fire-fighter connexion in aluminium with stopper Ø 50.
INSTALLATION REQUIREMENT:
> Flat bottom, total sustained on a solid mass perfectly drawn with the rule. |
|
Alltech Dosieranlagen GmbH is accredited for the production of tanks as officially defined by the relevant German design certifications. Our tanks receive certification according to the high standards and requirements of the German Water Protection Act (Wasserhaushaltsgesetz; WHG).
Moreover, we are accredited for the production of tanks according to the Technical Tank Specifications of Switzerland. Our service package comprises design, manufacture and documentation including the necessary certificates. In addition to our standard tanks, we produce specially designed process and storage tanks according to your wishes and needs
|
|
This type of tank, in stainless steel 304 L or 316 L, can be provided in volumes of a few m3 to 250 m3.
Built in our factory, they are transportable by roadways.
Their structure is in conformity with client's specifications.
The application of "CODRES" construction code guarantees their fabrication quality.
See also the products:
- SITE WORK
- PRESSURE VESSELS
- INTEGRAL INSTALLATION
- ARCHIVE BIN |
|
The FS5000 Manufacturer of flow switch Controller is designed for use in applications that require flow/no-flow control of feeding pumps and other devices. It includes a flow switch and three (3) 115V receptacles that are powered with flow and one (1) 115V service receptacle. Power indicator light, flow indicator light and test switch are included.
|
|
OPERATION PRINCIPLE
Operating by batch between 2 levels. The constant concentration is designed between 50 and 150 g/l, which ensures good homogeneousness of the slurry.
Equipment :
- Tank made of HDPE
- Agitator support
- Anti-vortex blades
- Inspection door
- Water inlet line
- Floating gauge level detection
- Overflow
- Version : 1 000 L or 2 000 L
Ø Standardised and optimised design
Ø Fully equipped compact unit
Ø Easy assembly
Ø Simple operating process
Ø Ready to use
|
|
Rectangular thermoplastic tanks
Rectangular tankRectangular tanks are available in closed or open-top design in capacities up to 15 m³. You are free to choose between materials as PP, PE, PVC and PVDF. Please find the corresponding standard dimensions in the schedule.
|
|
Cylindrical tanks are available in closed or open-top design and in capacities up to 35 m³. You are free to choose between materials as PP, PE, PVC and PVDF. Please find the corresponding standard dimensions in the schedule
|
|
| The TANK-VAC draining appliances enable users to collect industrial fluids with or without filtering them. They extract swarf/chips, sludge and sediments that they separate from the fluid collected, and then release the fluid either directly or following a fine filtration process, so that it can be re-used immediately. |
|
Features:
- This model is specially designed for fuel storage without using a retention professional tank.
- Inner professional container is manufactured from high density polyethylene.
- Outer protection is made of galvanized sheet iron, which protect totally polyethylene inner container. |
|
- For more than 35 years LINPAC Allibert Buckhorn has been manufacturing high quality plastic manufacturers of storage tanks using our unique process : Helix winding.
- Tanks wound by LINPAC Allibert already store more than 400 million litres of corrosive liquids. All industries, all types of chemicals, any conditions, standard or bespoke designs. |
|
CHARACTERISTICS
- High mechanical and chemical resistance.
- Absence of internal tensile strength.
- High thickness wall.
- Possibility of conical bottom.
- Anti-UVA additives.
- Single-layer construction, with no seams or welds.
- The tanks are maintenance-free.
- For the storage of chemicals, fertilizers, acids , oil, water ,etc.
- Suitable for substances with a density until 1,85 kg./dm3. |
|
Our polypropylene tanks are fabricated from high gloss, stress relieved, sheet stock up to 1" thick and conform to ASTM-4101, Group 1, Class 1, Grade II. Each tank is welded using a state of the art extrusion type industrial welder with continuous strand capability. Tanks can be fabricated to include specialty liners such as Koroseal, PVC, or lead.
KCH tanks can be equipped with specified rim widths, weirs, and professional fittings, and equipped with polypropylene encased tubular steel girth bands for added support, where applicable. |
|
For all tasks requiring continuous application of substantial material / paint quantities at a steady pressure, SATA paint pressure vessels are the ideal solution. Different professional tank sizes, ranging from 2 to 100 iters, and variable pressure adjustment allow almost unlimited possibilities. Accessories dedicated to special tasks, such as manual, pneumatic or electric agitators are available.
Both low viscosity professional paints and high viscosity or abrasive materials can be applied swiftly and without problems with SATA paint pressure tanks. There are no moving parts and, therefore no wear and tear. All material-conveying parts can be supplied in stainless steel to special order. Work becomes especially profitable if the pressure tank size can be adapted to the original material professional container; reducing cleaning to a minimum as the original material container is simply inserted into the paint pressure tank. |
|
Stainless steel and carbon steel tanks are manufactured from specified gauge sheet stock. All welds are applied utilizing continuous MIG splicer, inside and out.
Carbon steel tanks exterior are painted with a corrosion resistant epoxy paint. |
|
Rota has extensive experience in pressure vessels. The design and detail engineering of pressure or atmospheric storage tanks suppliers, transport tanks, cylindrical and spherical tanks and field-erected tanks are in our field of work.
Rota’s experience, technical expertise, management skills and professional integrity warrant its inclusion in your bidders list.
|
|
- UN approved for chemicals transportation by land (ADR)
or by sea (OMI/IMDG).
- Economical : UN approved for the repeated handling of
hazardous liquids over a 5 year period without reconditioning.
- Reliable : Strong rotationally moulded bottle designed to resist
shocks and repeated handling.
- Corrosion resistant : 100% plastic and maintenance free.
Accessories and options available to suit application. |
|
Rota has extensive experience in pressure vessels. The design and detail engineering of pressure or atmospheric storage tanks suppliers, transport tanks, cylindrical and spherical tanks and field-erected tanks are in our field of work.
Rota’s experience, technical expertise, management skills and professional integrity warrant its inclusion in your bidders list.
|
|
Features:
. CXC film built to pharmaceutical specifications
. Unique formula means zero residual taste or smell
. Lightweight design
. Super touch construction results in maximum abrasion resistance
. Quick connect professional hose assembly means easy-on, easy-off when you're swapping out components or filling bladder
. Articulated Bite Me™ cock with magnetic Clip
. PE kink-resistant tubing with our antimicrobial formula, Aquaguard™
. Bladder protected by our antimicrobial formula, Aquaguard™
. 80mm RapidFill™ Cap to facilitate easy filing and drying
. Color: clear |
|
To fill the tank with your machines or vehicles, do not waste any more time, choose a practical, reliable and autonomous delivery system.
Capacities: 1000,1500 and 2000 liters.
Other galvanized steel mobile versions, 400,600 and 980 liters.
|
|
Transport tanks and of storage out of polyester, very solids and light, resistant to freezing, the sun and rust.
They can contain foodstuffs like many chemicals.
More than 60 different models, from 200 to 10.000 liters, rectangular, oval or vertical forms.
|
|
Very resistant tanks, of quality food and compatible with many chemicals.
7 capacities from 60 to 500 liters.
Teams of a cock outlet low, a screwing lid and 2 handles of transport.
Industrial or wine completion.
|
|
|
|