|
|
Container for food industries:
The food industry has very special requirements on steel IBCs. Gallay not only offers a variety of bulk containers but also a complete service in reconditioning and sterilization.
|
|
Buckhorn is pleased to introduce a wide range of Intermediate Bulk Containers (IBCs) for safe, sound and secure liquid material handling. The Buckhorn IBC selection is represented by two distinct lines: the new Caliber Series, featuring products acquired from Schoeller Arca Systems, and Buckhorn’s original Citadel and Citadel-v line - providing a variety of choices for any application!
These injection- and structural foam-molded containers are compact, collapsible and designed to handle both fluid and dry products. Their clear advantages over traditional single trip, disposable alternatives include:
- Molded from FDA-approved materials, USDA-approved designs
- Substantially lowers packaging costs and cost per trip with a returnable / reusable system
- Limited use of packaging materials (only the liner bag is disposable)
- Hygiene - containers do not rot or become corroded, and are easy to clean
- Safety - improved product protection and storage
- Easy to fill, discharge and transport
- Optimal space utilization - stackable and foldable
- Secure stacking up to five-high with up to 3,000 lbs. of product*
- Withstand temperature extremes
- Certified for rail shipping
- Tamper-evident features
- RFID and other identification options available
- Can be filled and shipped with hot liquids
|
|
Repaltainer:
This first 1,000 liter composite IBC with pallet and top cover made of recycled PE has been successfully tried and tested for multi-trip use. Even under extreme mechanical and climatic conditions. Besides its ecological values, the pallet offers decisive performance benefits and superiority to conventional pallets. All components of the MAUSER Repaltainer® are exchangeable for better reconditioning and re-use. And at the end of its service life, all parts are again fully recyclable.
|
|
Three elements characterize our IBC module system: quality, safety and economy. Being the developers and manufacturers of our products, we stand behind this promise with our name. The portfolio includes our safe, highly molecular PE-HD containers featuring WERIT's proven spillage valves with tripe safety for liquid goods of virtually any consistency. It also comprises the pioneering patented open steel tube frame construction, which has long been adopted as an international standard for open frame constructions.
And finally, it includes WERIT's in-house developed high-quality plastics palettes (which are also available in steel or wood),w hich ensure your filler media always stands its ground, keeping your logistics processes safe.
|
|
Suitable for food use). Orifice of filling DN 225 with lid(snack) in coil, if it is wished, also DN 400. Plumbing fixtures of bulging integrated Valve of butterfly NW 50.
MEASUREMENTS:
Height: 950 mm.
Base: 1000 x 1200 mm.
Capacity: 800 Liters.
ENDED IN:
Metallic structure in Galvanized electrolytic.Palet of (Plastic) polyethylene.
|
|
MEASUREMENTS:
Interior measurements: 1000 x 1000 mm.
Exterior measurements: 1305 x 1305 mm.
Exterior measurements pipes: 1140 x 1140 mm.
Height base: 300 mm.
PRINCIPAL CHARACTERISTICS:
* Capacity of load 1500 Kgrs./unit.
* Detachable and stackable.
ENDED IN:
Painted Blue color.
OPTIONAL ACCESSORIES:
* Ended in Galvanized.
* Supplement 4 gyratory wheels Diam.125 mm.
* Low support Opening.
NOTICES: Height of the props (pipes) to choosing between(among) 1000, 1200, 1500 and 2000 mm., ended in galvanized electrolytic.
|
|
FEATURES
With the RYD-1000 bottle conception an optimum draining is achieved.
The RYD-1000 design make the best use of the available storage and transportation space.
All RYD-1000 components are easily replaceable.
ISO containering:
20' container = 18 units.
40' container = 40 units.
470x530mm. and 290x530 mm. identification plates.
It has four protections on the lower corners, manufactured with polyethylene, to protect the inner container to avoid damages during manipulation.
UN approved for the transportation of dangerous goods according to ADR, RID and IMO regulations.
|
|
ORBIS has broadened its BulkPak® product line and now offers the largest selection of bulk containers in the industry, in footprints from 32" x 30" to 78" x 48".
ORBIS BulkPak containers protect product during picking, assembly, processing, storage and distribution applications in many industries, including pharmaceutical, poultry, automotive, appliance, aerospace, bakery, produce, apparel and electronics.
Bulk containers are available in light-duty, medium-duty and heavy-duty designs to meet a wide range of application requirements. These containers are available in collapsible, straight-wall and nestable styles and offer the strength and rugged durability demanded in today’s material handling and distribution systems.
|
|
PRONAL flexible tanks are ideal for storing and transporting liquids (drinking water, hydrocarbons, chemical solutions, foodstuffs, industrial waste, sludge... ).
They are manufactured with elastomer or plastomer materials, depending on the application, and reinforced with high strength fabric. This is a simple economical solution.
Flexible tanks are used throughout the world and are suitable for thousands of users.
Advantages:
- lightweight,
- compact when folded,
- quick set up,
- no air inside the tank,
- a low-cost solution, no civil engineering required
A highly diversified range of products :
- ground storage up to 500,000 litres,
- can be transported on trucks, pick-ups, boats and aircraft, suspended under a helicopter or towed behind a vehicle,
- structured tanks and ferry fuel tanks for aeroplanes and helicopters, with anti-crash and self-sealing versions.
|
|
This storage tank for liquids or powdery products (water reserves, fish-breeding pools, safety sand vat, fertilizer, silo, effluent basin, storage of sludge cake) includes :
- A modular metal frame made out of galvanized steel assembled with bolts and nuts.
- A tight envelope made out of special polyester imputrescible cloth, coated with 1000 g/m2 PVC and reinforced by 2 welded belts.
The open vat is very light and no compact. It is very easy to clean in case of pollution of water by muds, leaves, sand, etc ...
|
|
|
Our products are designed to satisfy the requirements of ultra-pure applications for the Pharmaceutical and Biotechnical Industries. Our precision engineered equipment sets the standard for quality and performance.
|
|
The DDS Bomb vessel is unique in that it is the first of its kind and displays the following features:
The vessel is smaller than conventional vessels, which results in a smaller heat capacity. Special attention has been given to a thermally balanced vessel design which has been achieved using computer aided design (CAD) and computer simulation of heat transfer characteristics.
The vessel has an oxygen volume of 0.22 litres (220ml), which allows for a 0,5gr coal sample at approximately 30MJ/Kg. The temperature sensors are located cylindrically within the vessel walls at eight places.
The approximate temperature rise of the vessel after burning of 0,5gr benzoic acid is 9 degrees C. Practical tests have shown that up to 0.8gr of benzoic acid can be burnt without affectin g the accuracy. Oxygen starvation affects the results with higher charges.
The vessel is "smart" with an microprocessor built into the base of the unit. All the information pertinent to a vessel is stored permanently inside the vessel i.e. vessel number, calibration, number of firings, date of last reconditioning etc.
The vessel PCB is only powered up when it is placed in the calorimeter. The consequences of the vessel memory is that any vessel can run in any ...follow link for more info
|
|
Custom cylindrical tanks and pressure vessels from Allegheny Bradford are ideal for pharmaceutical, biotechnology fine chemical, cosmetics, food processing and other ultra pure manufacturing environments. Our engineering specialists and skilled craftsmen work closely with you to design and fabricate vessels for your individual applications. Whatever your processing needs, from mix and transfer tanks to bioreactors and process vessels, Allegheny Bradford offers the superior quality and personal service you require. To meet our client's growing needs Allegheny Bradford has added new fabrication facilities and upgraded equipment for increased capacity and improves operational efficiency. As a result, we can deliver a wider range of quality tanks, including larger component equipment and process skids, faster than industry standards. We are committed to excellence in designing and manufacturing stainless steel tanks and vessels that meet the highest standards for performance and quality
|
|
Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure. The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure) safety pressure relief valves and Manual, Rotary or Oscillating agitation types are available to provide the best quality agitation.
Binks Pressure Feed Containers are constructed from the highest grade materials and fully comply with European and Global pressure regulations including PED, ATEX and ASME.
|
|
Alltech Dosieranlagen GmbH is accredited for the production of tanks as officially defined by the relevant German design certifications. Our tanks receive certification according to the high standards and requirements of the German Water Protection Act (Wasserhaushaltsgesetz; WHG).
Moreover, we are accredited for the production of tanks according to the Technical Tank Specifications of Switzerland. Our service package comprises design, manufacture and documentation including the necessary certificates. In addition to our standard tanks, we produce specially designed process and storage tanks according to your wishes and needs
|
|
Storage devices serve a number of purposes on a refrigeration system. On the high side of a system, the receiver will hold additional system refrigerant charge. On the low side of the system, the accumulator will trap excess liquid, keeping it from getting to the compressor. The oil separator will remove oil from the discharge vapor and return it to the compressor.
The A-AS protects the compressor from liquid slugging and is used with CFC, HCFC, and HFC refrigerants. It is available for systems through 28 tons nominal capacity.
|
|
Compressed air receivers, operating pressure 11 bar
- Receiver horizontal from 18 to 5000 litres
- Receiver vertical from 270 to 5000 litres
Compressed air receivers, operating pressure 16 bar
- Receiver horizontal from 50 to 5000 litres
- Receiver vertical from 250 to 5000 litres
Compressed air receivers with higher operating pressures
are available upon request.
|
|
COMPRESSED AIR RECEIVER (vertical 2000 L)
PED performance
Complete with:
- ball valve
- pressure gauge
- high pressure conecting hose (1 m)
- safety valveReceiver (l) 2000
Working pressure (bar) 16
Height (cm) 278
Diameter (cm) 100
Weight (kg) 490
Ordernr: Code
36114 2000 l - 16 bar B
|
|
Flexible Tanks
Storing - Transporting - Protecting - Producing
Muststore is the Musthane range of product providing economic and fast moving solutions for the supply of liquids : potable water, fuel, industrial liquids…The flexible tanks designed and manufactured by Musthane are mobile, foldable and made of high duty elastomer or plastomer coated fabrics (PVC, Nitrile, PU, Alkryn…). These tanks can be opened or closed, helitransportabe or towable.
Muststore geo-membranes are made of PVC, PVC Elvaloy, PEHD, Hypalon or Butyl, and are used to protect the environment, to store alimentary or industrial liquids and to produce biogas.
Musthane also supplies the following equipments :
- Smell Filters,
- Heloportable fuel pumps including filtering systems,
- hoses,
- specific valves
|
|
|
The Trelleborg Portapool is a flexible tank made of a PVC-coated polyester fabric. It can be used as a water reservoir or as a temporary collecting tank for hazardous materials. Its low weight and the small volume facilitate transport and storage.
|
|
Sizes to suit every need, up to 4,000 lbs (1,800 kg).
Tanks are certified to ASME Code.
Stationary or Mobile units available.
Internals are specially coated to prevent corrosion.
Various sizes of liquid SF6 storage tanks are available. ENERVAC's stationary or mobile Gas Storage Tanks are designed, fabricated and registered to the ASME code. Standard features include: Liquid level gauge, ASME relief valve, pressure gauge, temperature gauge, tank inspection flange, inlet and outlet valves. Mobile tanks are mounted on 12" (30 cm) casters with a tow bar.
Sizes available from 300 to 4000 lbs (135 to 1800 kg).
Epoxy coated internals to prevent corrosion.
Ideal storage vessel for consolidating partially used SF6 bottles.
Sulfur Hexafluoride (SF6) is an excellent gaseous dielectric for high voltage power applications. It has been used extensively in high voltage circuit breakers and other switchgear employed by the power industry. Applications for SF6 include gas insulated transmission lines and gas insulated power distribution substations. The combined electrical, physical, chemical and thermal properties offer many advantages when used in power switchgear. Some of the outstanding properties of SF6 which make its use in power applications desirable are:
high dielectric strength
unique arc-quenching ability
excellent thermal stability
good thermal conductivity
However advantageous the above properties are, Sulfur Hexafluoride is considered to be a fully fluorinated compound (FFC). Since FFC's have atmospheric lifetimes of up to 50,000 years, these potent greenhouse gases could contribute significantly and, essentially, permanently to global warming if emissions continue to grow. For example, lets compare the global warming potential of CO2 and SF6. CO2 has a global warming potential of 1, whereas SF6 has a global warming potential of 24,900!! Also, over the past year or so, the price of new SF6 gas has increased in price by as much as 600%!!
Due to the above reasons, SF6 is used mostly in applications that allow reclamation as opposed to using it on equipment that requires release of the gas, only to be re-filled with virgin SF6. ENERVAC produces a complete line of SF6 recovery and test equipment, from full sized gas reclaimers down to small decomposition detectors.
Full product range:
|
|
- For more than 35 years LINPAC Allibert Buckhorn has been manufacturing high quality plastic storage tanks using our unique process : Helix winding.
- Tanks wound by LINPAC Allibert already store more than 400 million litres of corrosive liquids. All industries, all types of chemicals, any conditions, standard or bespoke designs.
|
|
|
Pressure tanks made of galvanised steel or stainless steel are available in many sizes (1 litre - 250 litres). Due to uniform, pulsation-free material transfer from tank to gun, a first class spray pattern and a high working speed is achieved. If necessary, pressure tanks can be fitted with air-powered or electric agitators in order to achieve high hue accuracy and a homogeneous surface finish. WALTHER PILOT offers complete systems for all requirements. WALTHER PILOT manufactures pressure tanks in accordance with strict requirements of pressure equipment Directive 97/23/EC. In accordance with Directive 94/9/EC (ATEX), WALTHER PILOT has the approval for manufacturing equipment for appropriate application in areas exposed to explosion threats. Furthermore, we are certified to manufacture and approve tanks in accordance with the US-American ASME-code as well as the Chinese Safety Quality License. 10 years of delivery guarantee for spare parts.
|
|
Bulkdrum® II:
Bulkdrum® II is an economical, fully recyclable, limited-use IBC. The Bulkdrum® II combines a polyethylene bottle inside a multi-wall corrugated shell and is UN marked for regulated products. Reduce your costs and improve productivity with one of the lightest IBCs available.
|
|
|
Parr offers non-stirred pressure vessels in convenient style, sizes and pressure ranges for many laboratory uses. Applications for these vessels extend to all types of laboratory work wherever a chemical reaction or physical test must be performed under pressure at elevated temperature. Sizes range from 21 ml to 5 gallons.
|
|
For all tasks requiring continuous application of substantial material / paint quantities at a steady pressure, SATA paint pressure tanks are the ideal solution. Different tank sizes, ranging from 2 to 100 iters, and variable pressure adjustment allow almost unlimited possibilities. Accessories dedicated to special tasks, such as manual, pneumatic or electric agitators are available.
Both low viscosity paints and high viscosity or abrasive materials can be applied swiftly and without problems with SATA paint pressure tanks. There are no moving parts and, therefore no wear and tear. All material-conveying parts can be supplied in stainless steel to special order. Work becomes especially profitable if the pressure tank size can be adapted to the original material container; reducing cleaning to a minimum as the original material container is simply inserted into the paint pressure tank.
|
|
VERTICAL CYLINDRICAL STAINLESS TANK WITH FLAT BOTTOM ON RAFT
> Manufacturer: CHALVIGNAC
> Steel stainless construction304 or 316 L.
> Auto-draining flat bottom with angle of 3%.
> Capacity up to 3000 HL manufactured in the factory - Maximum diameter 5,500 m.
> Dimensions on request.
> Fitting of accessories on request.
> Adjusting regulation rings on the ferrule (hot and cold).
THESE TANKS ARE MAINLY USED FOR STORAGE (wine, ...).
See also the products:
- VERTICAL CYLINDRICAL STAINLESS TANK WITH COMPARTMENTS
- VERTICAL CYLINDRICAL STAINLESS TANK WITH FLAT BOTTOM ON SUPPORTS
|
|
STANDARD EQUIPEMENT
> Composite material developed from polyester resin and fibreglass obtained by orthogonal filament rolling on horizontal metal moulds.
> Glazed intern surface, smooth extern surface.
> Blowhole Ø 160 PVC.
> 2 handling rings.
> 1 oval hermetically-sealed stainless door - 310 X 420.
> 1 valve with total stainless pulling ball DN 50 on square strap 100 X 100.
> Graduation of 10 m3 in 10 m3 with intermediary index.
> Predisposition for fixation on ground.
> 1 fire-fighter connexion in aluminium with stopper Ø 50.
INSTALLATION REQUIREMENT:
> Flat bottom, total sustained on a solid mass perfectly drawn with the rule.
|
|
- UN approved for chemicals transportation by land (ADR)
or by sea (OMI/IMDG).
- Economical : UN approved for the repeated handling of
hazardous liquids over a 5 year period without reconditioning.
- Reliable : Strong rotationally moulded bottle designed to resist
shocks and repeated handling.
- Corrosion resistant : 100% plastic and maintenance free.
Accessories and options available to suit application.
|
|
|
