|
|
Oil Tank
Sunfab offers its own range of hydraulic oil tanks ST 250 with a number of functional improvements necessary for high performance hydraulic systems.
Sunfab ST 250 radically reduces the air mixture in the hydraulic oil with an oil pipe around the return filter and a tried and tested baffle plate design. Air mixture is the main reason behind noise and cavitation of the pump.
Sunfab ST 250 features an external breathing filter, which is fitted in a protected position to reduce the risk of clogging. The filter is connected to the tank via a hose.
Sunfab ST 250 is supplied complete with correctly dimensioned connections, filter and brackets.
The oil tank is available in two different materials:
- ST 250 A in aluminium
- ST 250 S in stainless steel
|
|
Bunded Heating Oil Tanks - Tuffa 10000 VB
Product description :
- A cabinet to house all appropriate equipment
- 2" BSP fill connection c/w cap and chain
- vent
- Watchman contents gauge
- 1" Bottom outlet (top outlet available on request)
- Battery bund / overfill alarm located within the cabinet
- Overfill prevention valve
Optional Extras
- Fire Protection
- Higher accuracy gauge
- Armco protection barrier
|
|
|
The new tank systems, such as WERIT safety tanks Techno K and E, offer numerous advantages in terms of safety and space savings: they are light-weight, clean and anti-corrosive and can be set up as battery, multi-block and angle systems. Thanks to their compact dimensions they are easy to handle, even in tight areas. A second exterior tank made entirely of plastics allows direct installation in the central heating room and makes the use of an oil pan, additional mason work and triple protective coating absolutely redun-dant. Anyone who installs a WERIT tank will be pleased with the additional space they now have available for other uses.
|
|
In the oil reservoir all oil coming from oil separator is stored and cooled down. Any refrigerant trapped within the oil is boiled of.
The size of oil reservoirs required is determined by the number of compressors connected, compressor oil charge, system refrigeration charge and operating conditions.
|
|
Features
- Oil Vent plug
- Suction pipe 1'' 1/2
- Return connection
- Filter Flange
- Support
- Level indicator
|
|
Range supplements from 100 to 3300 liters, on casters, feet, sleeves, with lid.
Containers out of polyester very solid and light, easy of maintenance thanks to the smooth walls and to the corners rounded, being able to contain foodstuffs like many chemicals.
|
|
| ... products without technical information |
| |
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods , and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
|
|
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
Bruss hydraulic weighing system - model MHW
The Bruss MHW system is an oil pressure based weighing system which gives a cost effective way to weigh all your loads on your forks. You lift the load to a designated level and manullly lower the forks to a referance point - the MHW software takes and calculates the right weight and shows it in the display you can also use the system for overload protection - an optional warning buzzer stops the operator from handling the heavy load. With Bruss weighing on wheels you are a weigh ahead !!
|
|
Hydraulic fork lift truck weighing system MHW+
The Bruss MHW+ is an oil-based weighing system for fork lift trucks with superior accuracy combined with extreme ease of use. With this instrument you will no longer recieve incorrect values in your warehouse and your people can accuratly inform the transport company about the weight of the goods.
Dangerous heavy loads are spotted directly and can be dealt with accoordingly. Safety First!
The Return on investment is unique in the branche - ask your Material handling dealer for a quote. The MHW+ lowers the forks for 4 seconds and weighs the goods while in motion.
This ensure an accurate measurement of the oil pressure which are converted into kilograms.
With a Bruss MHW+ any weight is the right weight.
Bruss Weighing on Wheels
|
|
The RCS-110-PLUS is an accurate hydraulic scale for counterbalanced trucks and reach trucks. On a forklift truck with a capacity of 5,000 lbs the weight is displayed in steps of 5 lbs, with a + 10 lbs tolerance. The RCS-110-PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
The RCS-110-PLUS is an excellent tool for weight checks on a forklift truck, for example at goods reception, when determining shipping weights, preventing overloads on freight trucks, stocktaking, stock control etcetera.
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
| ... products without technical information |
| |
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods , and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
|
|
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
Bruss hydraulic weighing system - model MHW
The Bruss MHW system is an oil pressure based weighing system which gives a cost effective way to weigh all your loads on your forks. You lift the load to a designated level and manullly lower the forks to a referance point - the MHW software takes and calculates the right weight and shows it in the display you can also use the system for overload protection - an optional warning buzzer stops the operator from handling the heavy load. With Bruss weighing on wheels you are a weigh ahead !!
|
|
Hydraulic fork lift truck weighing system MHW+
The Bruss MHW+ is an oil-based weighing system for fork lift trucks with superior accuracy combined with extreme ease of use. With this instrument you will no longer recieve incorrect values in your warehouse and your people can accuratly inform the transport company about the weight of the goods.
Dangerous heavy loads are spotted directly and can be dealt with accoordingly. Safety First!
The Return on investment is unique in the branche - ask your Material handling dealer for a quote. The MHW+ lowers the forks for 4 seconds and weighs the goods while in motion.
This ensure an accurate measurement of the oil pressure which are converted into kilograms.
With a Bruss MHW+ any weight is the right weight.
Bruss Weighing on Wheels
|
|
The RCS-110-PLUS is an accurate hydraulic scale for counterbalanced trucks and reach trucks. On a forklift truck with a capacity of 5,000 lbs the weight is displayed in steps of 5 lbs, with a + 10 lbs tolerance. The RCS-110-PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
The RCS-110-PLUS is an excellent tool for weight checks on a forklift truck, for example at goods reception, when determining shipping weights, preventing overloads on freight trucks, stocktaking, stock control etcetera.
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
| ... products without technical information |
| |
|
|
|
|
Station for the temporary storage of waste oil, with palletised steel basin and vessel with threaded opening, remouvable filter-draining, clock level indicator and stainless steel flame trap, loaded with activated carbons for tank breathing and to prevent dangerous fumes when opening.
Vessel in anti-oil, anti-acid, shockproof, with UV treatment for permanent exposure to atmospheric agents , according to OSHNER, DIN and AFNOR regulations, single moulded, reinforced.
3 mm carbon-steel basin with structural reinforcements.
Weldings with electronic control of the edges and of the gaseous mixture to assure perfect waterproofing. Layout, tolerances, rims, chamfers, nominal weight and finishing grade according UNI parameters.
External anti-corrosion treatment obtained with visible anti-oil and antiacid resins.
Safety labelling for accident and pollution prevention in compliance with current, EC and national regulations (D.L.22 of 05/02/1997, D.L. 626/94, D.L. 915/82 and following modifications.)
Trial testing at full load for 48 following hours at atmospheric pressure at room temperature.
|
|
Bunded Waste Oil Tanks
Tuffa 1400VBWOS
Capacity: 1400 litres / 300 gallons
Dimensions: 1576mm (DIA) x 1800mm (H)
Product Description - Complete with:
* Tundish
* Filter
* Vent
* Easy access yellow flip lid
A Tuffa Waste Oil Tank would benefit businesses in the motoring industry such as Garages, Bus Depots, Haulage companies etc. It will ensure that the waste oil is stored safely and securely at a reasonable price.
The Tuffa bunded waste oil tanks are designed with pollution control in mind and are manufactured to all appropriate current legislations with in the oil industry, pending correct installation. bunded waste oil tanks come in a range of sizes
|
|
|
|
|
|
Container of worn engine oil recovery standard R1000 or R 1500. These containers entirely metal are equipped with a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, they have a respective oil storage capacity of 1250 or 1700 liters and 800 and 1250 liters for the storage of the empty cans. Another characteristics: measure level, counter of discharge of great capacity with shutter of protection and automatic system of locking per float when the collector is full, connection of pumping DNN 50 standardized for the draining of the collector. FRENCH MANUFACTURE
This worn oil collector, entirely metal, is robust and, an increased protection against the fire and vandalism offers. Its broad counter of discharge is equipped with a rain-proof shutter and an automatic system of locking when the collector is full: that avoids any inopportune overflow thus. Its under anti-corrosion layer and its completion in painting polyurethane protects it from the bad weather and of UV and, thus guarantees to him an optimal lifespan. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard M 1200 cd. This container is équipéd' a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, Its low part out of steel or stainless with an oil storage capacity of 1200 liters and its high part out of polyethylene has a receptacle for the storage of the empty cans of 750 liters. These other characteristics: measure level, counter of discharge of great capacity, connection of pumping DNN 50 standardized for the draining of the collector, ring of levage.FABRICATION FRENCH
This worn oil collector offers an excellent report/ratio QUALITE/PRIX. Its gauge of level will enable you to see when the collector is full and, that will avoid any inopportune overflow thus. Its under anti-corrosion layer and its completion in partly low painting polyurethane protects it from the bad weather and UV; Its high part out of polyethylene is appropriate perfectly for a use in saline medium. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
These containers of recovery of waste oils of the SEMI type industrial Modhuile are equipped with a double tank of retention out of polyethylene, in conformity with standard XP-H-96618 and the decree of April 7th, 1997. Capacities: 600,1350 or 2500 liters. Broad funnel with boltable lid to pour waste oils. When the collector is full it is enough with the oil pick-up to remove the grid of filtration of the funnel and, to plunge its nozzle of aspiration to carry out draining. Finally it are equipped out of standard with a gauge with level and, of an electronic system of detection of escapes between the 2 tanks.
IN OPTION: Connection fireman DNN 50 if you do not want us that the oil pick-up uses the funnel of discharge to carry out draining collector as it is full.
This polyethylene collector answers perfectly a use in saline medium or corosifs. Simple of use, Their respective capacities of 600,1350, and 2500 liters meet the needs for each one. The gauge of level will enable you to know when the collector is full and will avoid any inopportune overflow. Its double tank of retention, in conformity with the regulations in force avoids any accidental pollution Enfin its system of detection ant-escape between the 2 walls will inform you in the event of escape of the receiving tank. Modhuile indistrielle of SEMI type fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
This container of recovery of waste oils or the effluents (gray water or black water) with double tank of retention, out of polyethylene, is in conformity with standard XP-H-96118 and the decree of the 4/7/1997. With capacity 2500 and 5000 liters, it is equipped with an electric or manual pump and a nozzle of aspiration.
Other characteristics: trap door of access to the boltable pump, measures level, electronic system of detection of the escapes between the two walls, indicator digital of level with remote sensing, Raccord FIREMAN DNN 50.
It at summer especially conceived for the marinas.
it makes it possible to directly aspire waste oils or effluents to the source. Its great capacity makes it possible to space the draining of the collector. Its system of sensing remote when the collector is full allows to the person in charge of management waste not to systematically on the spot check the level of filling of the collector.
Its polyethilene structure protects it perfectly from the saline air and corrosion.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
