|
|
• Turnkey PSA onsite oxygen generator plants.
• Mobile, compact, stationnary or shelter units available.
• Oxygen output purity, flow and pressure are stable and certified.
• CE marked for medical use.
• Standard available purity ranges : 93%, 95% and 99%. |
|
The H2 MAX3 Series is designed to satisfy the needs of industry.
This series of hydrogen generators is a true ambassador for Italian innovation and technology. Claind is the only Italian manufacturer of pressure electrolysis hydrogen generators capable of conforming to the strictest CE international safety standards (ATEX, PED).
Technical specifications
Output: from 0.5 to 30 Nm3/h
Delivery pressure: 15 bar (without auxiliary compressors)
Gas purity: 99.7% without deoxo, 99.999% with deoxo
CE certified (ATEX, PED)
BENEFITS
Safety: maximum operating safety.
Purity: Oxygen levels below 0.2% O2.
APPLICATIONS
Refuelling stations for hydrogen fuelled vehicles
Energy storage systems and research into renewable energy sources like peak shaving, UPS, and completely off-grid systems.
Industrial processes like annealing, noble metal welding, cooling of nuclear and other electrical power stations, food processing and pharmaceuticals.
|
|
Nitrosource
autonomous 100%, with a reduced maintenance, the Nitrogen generators Parker replace the bottles of gas and the liquid supply of nitrogen.
Applications: inertage, network of nitrogen, packaging of food products...
Based on membrane technology, Nitrosource is the nitrogen generator of evolutionary design, enabling you to extend the capacity of the generator on site without repurchasing a complete generator. It thus follows the evolution of the growth of your factory. It produces nitrogen in full safety 24:00 /24H, until 4000 Nm3/h.
Nitrosource® enables you to easily produce nitrogen on site starting from compressed air.
Nitrosource® is composed of a central processing unit which can be wide in term of capacity by the addition of 5 pennies units. Thanks to the design Master/slave, up to 11 central processing units and theirs under units can be connected between them and managed like a single generator.
Nitrosource integrates a station of filtration of compressed air of high-quality. This characteristic optimizes laquality of compressed air in entry of the generator, ensuring a great longevity of the hollow fiber membranes. The generator is equipped with a digital system of data management to record and communicate the parameters of operation such as the pressure, the flow and the residual concentration out of oxygen.
The equipment is deprived of parts moving, ensuring an operation without concern, durable and
almost without maintenance. The generator is ready to function as soon as the compressed air is connected.
Nitrosource offers an unlimited quantity of nitrogen to you and can be easily connected to an external reservoir of storage. This will enable you to absorb the peaks of consumption in your applications where the demand for nitrogen is variable.
Ideal solution to replace the nitrogen bottles or the liquid nitrogen supply.
|
|
* 500l/h of pure hydrogen at 8 bars without compressor
* System control fully electronic
* Unattended operation 100% static
Completely autonomous and 100% automatic, this equipment with a recognized reliability is perfectly studied to the enclosed sites particularities taking account their geographic locations, the difficulty linked to the electrical power supply and the communications means. |
|
* Pure hydrogen production from 0,5 to 10 Nm3/h
* Adjustable pressure from 1 to 10 bars
* System control fully electronic
All the hydrogen generators series « BP MP » are skid mounted ; the control system is fully electronic and the cooling is through natural air. |
|
| The portable PEM hydrogen generator is a high performances unit that produces a hydrogen gas of quality 4.0 (99,99%) at a pressure level of 9,5 bar absolute under conditions of maximum safety. |
|
Tailored Product
Based on its extensive experience in hydrogen technology HyGear has well proven reforming- and PSA-modules available in several sizes. These modules which have been proven in HyGear's HGS-V and HGS-L can be cascaded to come to larger capacities. Thus tailored systems can be engineered to meet customer requirements up to 250 Nm3/hr of hydrogen supply. The reforming reactors have already been tested on several fuels. Through development programs the fuel range and size will be extended further over the next few years, depending on market requirements. Today natural gas fed systems up to a capacity of 250 Nm3/h can be supplied with CE-certificate and one year full warranty. Other fuels and sizes can be offered upon request. |
|
HGS-V: 5 Nm3/h On-site Hydrogen Generation System
The HGS-V, generating 5 Nm3/h of high purity hydrogen, is targeted for usage at tomorrow's hydrogen fuelling stations as well as for today's supply of hydrogen as industrial process gas, for instance for glass manufacturing, semi-conductor industry, laboratories and metal treatment. It is delivered with CE-certificate and one year full warranty.
Specifications
- 5 Nm3/h
- 99.999% purity
- 5.5 bar(g)
- Size 2.5 x 3.2 x 1.0 m
- CE-certified
- Full warranty
Options
- Low pressure natural gas feed (25 mbar)
- Sub zero adaptation kit
- Customer colours |
|
HGS-C: On-site Hydrogen Generation System
The HGS-C is a 100 Nm3/hr on-site Hydrogen Generation System. It is primarily targeted for on-site generation of process gas for industrial applications such as glass production, metal treatment, electronics manufacturing and food processing. It offers the most cost effective way for supplying hydrogen on-site, it avoids local storage of large quantities of hydrogen and above all it is very environmental friendly as compression and transportation energy is avoided. The HGS-C can also be used at tomorrow's hydrogen fuelling stations. In this application it is suitable for projects with up to 100 hydrogen cars. The HGS-C products are supplied with CE-certificate and one year full warranty.
Specifications
- 100 Nm3/hr
- 99.999% purity
- 5.5 bar(g)
- Size 2.6 x 3.5 x 6.0 m
- CE-certified
- Full warranty
Options
- Low pressure natural gas feed (25 mbar)
- Sub zero adaptation kit
- Customer colours
- Onboard high pressure storage |
|
HGS-L: On-site Hydrogen Generation System
The HGS-L is a 50 Nm3/hr on-site Hydrogen Generation System. It is primarily targeted for on-site generation of process gas for industrial applications such as glass production, metal treatment, electronics manufacturing and food processing. It offers the most cost effective way for supplying hydrogen on-site, it avoids local storage of large quantities of hydrogen and above all it is very environmental friendly as compression and transportation energy is avoided. The HGS-L can also be used at tomorrow's hydrogen fuelling stations. In this application it is suitable for projects with up to 50 hydrogen cars.. The HGS-L products are supplied with CE-certificate and one year full warranty.
Specifications
- 50 Nm3/hr
- 99.999% purity
- 5.5 bar(g)
- Size 2.6 x 4.0 x 3.0 m
- CE-certified
- Full warranty
Options
- Low pressure natural gas feed (25 mbar)
- Sub zero adaptation kit
- Customer colours
- Onboard high pressure storage |
|
# Chemical process with very easy use
# 3 m3 of hydrogen gas produce in less than 10 minutes
# Especially adapted to isolated regions
# Gas reserve possible
Easy to handle, this generator does not require any maintenance other than its cleaning after each hydrogen production operation. |
|
Nitroflow BASIC
autonomous 100%, with a reduced maintenance, Generators Parker the nitrogen replace the gas bottles and the liquid nitrogen supply.
Applications: inertage, network of nitrogen, packaging of foodstuffs...
Based on membrane technology, Nitroflow BASIC is the nitrogen generator with the most compact, esthetic integrated compressor and silencer of the market (<55 dBa). it produces nitrogen in any safety 24:00 /24H, until 1,5 Nm3/h.
It integrates a piloting by microprocessor, a control and adjustment of the parameters of work on touch screen and an analyzer of O2 to visualize the nitrogen purity. The strong point of the system: the compressors have one lifespan longer than those of our competitors (patented exclusive system). 2 years or 8000 operating hours exclusive guarantee.
Ideal solution to replace a nitrogen bottle/day. |
|
ADVANTAGES AND ECONOMIES
Conceived specifically to meet the requirements of flows and purities of the analytical instruments
Increase in the analytical performances
Increase in the effectiveness of the laboratory
Reinforced safety
More important economies
Simple installation
Recommended and approved by the manufacturers of instrumentations LCMS
APPLICATION
Product of nitrogen high purity starting from compressed air.
Replace the nitrogen bottles for the following applications:
- LCMS/MS
- DETECTOR ELSD
- EVAPORATION Of SAMPLES
Principle of operation
Nitrogen is produced by using membrane technology, starting from a network of compressed air without oil or pre treaty of a mini pressure. of 110 psi.
The fall of pressure is only of 10 psi (0.5 bar), weakest of the market, making easier the connection of the generator to your own network of compressed air.
The diaphragm functions on the principle of the selective permeation, or the oxygen, the steam and the CO2 which are fast gases cross the diaphragm, while nitrogen, gas slow, continuous to circulate in the form of gas flow inside the diaphragm. |
|
Atlas Copco proposes a range of 7 nitrogen generators NG offering of the nitrogen flows from 1,3 to 130 m3/h and of the rates of purity up to 99,99%.
Based on technology PSA, the principle of operation is simple and powerful. Easy to install, the NG are compact and reliable. Their modular concept makes it possible to assemble several units in parallel to adapt the production of nitrogen at the request of the process with an optimal energy efficiency. Used downstream from compressors of air and equipment of treatment of air Copco Atlas, they offer all the advantages of a comprehensive solution: quality of the components, traceability, optimal energy efficiency, services. |
|
ADVANTAGES AND ECONOMIES:
- Conceived specifically to meet the requirements of flows and purities of the analytical instruments
- Increase in the analytical performances
- Increase in the effectiveness of the laboratory
- Reinforced Safety
- More important Economies
- Simple Installation
- Recommended by Manufacturers of Instrumentation
APPLICATION:
- Produced nitrogen high purity starting from compressed air.
- Replaces the nitrogen bottles for the following applications:
- GC-Gas Vector
- GC-FID, NPD, ECD, AED
- ICP
- ELSD
- FAKE
- LCMS
- Food of a complete laboratory to supply several analytical instruments (LCMS, ICP, EVAPORATIONS Of SAMPLES)
Principle of operation of the PSA:
Technology used to produce a nitrogen flow high purity is adsorption with swinging of pressure. This technique uses a molecular bed of sieve with coal (CMS) to selectively eliminate O2 and the other contaminants from the ambient air. Alternate bed between the modes of purification and regeneration to ensure a continuous production of nitrogen.
The gas generator is designed to receive filtered pre compressed air with 7 barg provided by a compressor without oil (provided by the laboratory or integrated in the generator). This flow of filtered and compressed air passes then in the bed of CMS which is in mode of purification. At this point in time O2, CO2, moisture and certain hydrocarbons are eliminated from the compressed air, producing a gas flow nitrogenizes clean, dry and of high purity. |
|
Wellman Furnaces, Inc. offers a complete line of Exothermic Gas Generators for rich and lean operation. Standard sizes range from 750 SCFH to 30,000 SCFH. Refrigerated Gas Coolers can be provided to reduce the product gas dewpoint to the 40°F to 50°F range. Atmosphere Gas Analysis Panels are available to monitor the exo gas composition and control an optional trim valve in the burner fuel gas line to maintain the desired CO analysis.
Wellman Exothermic Gas and Steam Co-Generators will give you the process atmosphere gas you need and the added benefit of Free Steam. Major savings in both fuel and cooling water can be realized by combining your exothermic gas generator and steam boiler into a single unit. Paybacks range from six months to two years - Returning Your Initial Investment!
Exo Gas and Steam Co-Generators are available in sizes from 4,000 to 100,000 SCFH of exothermic gas, producing 390 to 9,780 lb/hr of steam. |
|
Claind’s range of air generators and purifiers includes pre-compressed air treatment systems and generators of purified, dried and zero impurity air.
Claind has also developed a latest generation, high efficiency catalyser for hydrocarbon removal. This advanced system is already applied to the AZ2000 Series and AG2000 Series as well as to the NG2000 and ANG2000 nitrogen generators.
|
|
PSA Technology
Integrated air compressor : noise level (< 52db)
Flow rate : 3L / min et 6L/min
Purity achieved : HCs < 0,1 ppm and water dewpoint < - 40°C
Increased safety in the lab compare to the use of high pressure cylinders
Easy to install
Hour run meter
Quick and easy servicing : needs to change filter and silencer once a year |
|
Capacity: 10-120 m3/h
Atmosphere type: Endothermic
Endothermic atmospheres generators produced by ELTERMA S.A.:
Normally used to produce carrier atmospheres for thermal treatment processes (carburizing, carbonitriding) as well as protective atmospheres, protecting against the oxidation and surface de-carbonization during the bright hardening of annealing processes.
The generators are available as gas fired or electrically heated versions.
The generators have the option of having either air or water cooling for the atmosphere.
ELTERMA S.A. atmosphere generators offer:
Easy access for heating elements replacement
Full control of the atmosphere carbon potential
Atmosphere gas cooling options are available using either air or water (ENE(G) type generators do not require a water supply)
Accurate retort temperature control and carbon potential control. |
|
H Series hydrogen generation systems use PEM (Proton Exchange Membrane) water electrolysis technology to produce 99.999+% pure, pressurized hydrogen onsite at customers' sites using only water and electricity as inputs, and without a mechanical compressor.
Reliable, efficient, compact PEM cell stacks have been used to produce high-pressure oxygen and hydrogen in military and aerospace life support applications for over 20 years.
The H Series hydrogen generation systems are uniquely attractive for generator cooling and offer:
· Improved reliability of supply by eliminating the need for frequent deliveries
· Improved site security by eliminating the need for routine hydrogen delivery truck access
· Guaranteed pure, dry hydrogen meeting UHP specs - 99.999% hydrogen - free of hydrocarbons and other problem impurities
· Very low inventory improves siting flexibility and safety – essentially zero hydrogen inventory from NFPA viewpoint
· Eliminates the need to order, manage, move, count or connect cylinders to the hydrogen supply system |
|
The Parker Balston Zero Air Generator can produce up to 30,000 ml/min of high purity zero grade air. Compressed air is pre filtered down to 0.01 micron and then purified using a state-of-art combined heated catalyst module.
There are no moving parts and no noise, making the generator extremely reliable and ideal to install in the laboratory. Simple and quick to install, the Zero Air Generator requires minimal maintenance just once a year.
The resultant air is free of total hydrocarbons (THC) to < 0.05ppm making it ideal for all FID applications. The low levels guarantee a low signal to noise ratio, ensuring a flat constant base line with no peaks or fluctuations. |
|
• Turnkey PSA onsite oxygen generator plants.
• Mobile, compact, stationnary or shelter units available.
• Oxygen output purity, flow and pressure are stable and certified.
• CE certified units.
• Standard available purity ranges : 93%, 95% and 99%. |
|
Zero Air
SPECIFICATIONS / BENEFITS
-Purity < 0,1 ppm CH4
-Range of flow rate : 1,5 à 30 L/min
-Quick and easy servicing : consist into changing the inlet and outlet filter once a year
-Improved analytical performance : the reduction of methane ( CH4) to less than 0.1 ppm reduces background noise and improves the base line stability.
-Increased efficiency in the laboratory
-Improved safety
-Economy
-Simple installation
APPLICATION
Produce laboratory grade purified and hydrocarbon free air from an existing in house oil free compressed air supply.
Eliminates the need for inconvenient high pressure cylinders. it is ideal for use with :
-GC-FID, NPD, FPD
-THA
ULTRA Zero Air
SPECIFICATIONS / BENEFITS
-Purity achieved : CO, HCs <0,1 ppm ; CH4, NOx, SO2, O3 < 1 ppm ; CO2 < 5-10 ppm ; Water pressure dewpoint < - 50°C
-Range of flow rate : 1,5 to 30 L/min
-needs to change the inlet and outlet filter once a year. Alarme available for the replacement of the catalyst and the NOx cartridge after three years of operation.
-Improved analytical performance
-Increased the efficiency in the laboratory
-Increased safety
-Economy plus importantes
-Easy to install
APPLICATION
Produce laboratory high quality air from an existing in house oil free compressed air supply.
Eliminates the need for inconvenient high pressure cylinders. it is ideal for use with :
-GC-FID, NPD, FPD
-THA
-GC-ATD
-Electronical nose
-Calibration of test machine |
|
| ... products without technical information |
| |
|
|
