|
|
Oxygen from the socket.
Oxygen supply without extensive logistics at purity range up to 40 %.
These membrane generators provide a continuous supply in the
capacity range of 150 ltrs./min. up to 2000 ltrs./min. at O2 purity
grades from 30 - 40 %. |
|
Oxygen PSA range
Oxygen production by use of "Pressure Swing Adsorption"
technology with purity rates up to 99,5 % and capacities
ranging from 0,5 - 2.000 Nm³/h.
Following options are available:
- alert function
- analyser units
- operation-hour counter
- pressure booster up to 300 bar
- touch panel
- SMS message system
- flow meter
- special voltage design. |
|
Oxygen Plants and Stations
Adsorption oxygen plants
High-performance plants designed for oxygen production from atmospheric air and cylinder filling.
Oxygen purity — up to 95%, Capacity — up to 3000 nm³/hr
Membrane oxygen plants
Fully automated membrane plants designed for air oxygenation.
Oxygen purity — up to 45%, Capacity — up to 10000 nm³/hr
Cryogenic oxygen plants
Plants for deep air freezing designed to produce both liquid and gaseous oxygen from air.
Oxygen purity — up to 99.9%, Capacity — up to 30000 nm³/hr
Mobile oxygen stations
Transportable stations allowing to deploy a complete oxygen production cycle with the cylinder filling option.
Oxygen purity — up to 95%, Capacity — up to 60 nm³/hr |
|
CENTRALE DE REMPLISSAGE DE BOUTEILLES EN CONTAINER
ATELIERS CLEF SUR PORTE
CENTRALE DE PRODUCTION D’OXYGENE ET D’AZOTE- CRAFT®
Les centrales de la gamme CNO sont identiques à celles de la gamme CPO à la différence près qu’elles disposent d’un générateur d’oxygène et d’un générateur d’azote permettant la production alternée des deux gaz et le remplissage de cylindres via deux rampes situées de part et d’autre du container atelier.
Rappelons que l’azote est utilisé aussi bien dans le secteur médical qu’industriel (conservation des aliments, contrôle de qualité en milieu industriel et hospitalier, conservation des cellules et tissus vivants, inertage du bain de plomb sur les lignes de fabrication du verre, gonflage de pneumatiques, etc).
Container avec toiture de protection, éclairage, mesure paramagnétique de qualité de l'oxygène et de l’azote.
|
|
• Turnkey PSA onsite oxygen generator plants.
• Mobile, compact, stationnary or shelter units available.
• Oxygen output purity, flow and pressure are stable and certified.
• CE marked for medical use.
• Standard available purity ranges : 93%, 95% and 99%. |
|
• Turnkey PSA onsite oxygen generator plants.
• Mobile, compact, stationnary or shelter units available.
• Oxygen output purity, flow and pressure are stable and certified.
• CE certified units.
• Standard available purity ranges : 93%, 95% and 99%. |
|
ISO 20' CONTAINERISED CYLINDER FILLING PLANT - TURN KEY
Iso 20' workshop container
The whole of the components is entirely mounted within a modified container serving as technical workshop divided in two areas with three access doors and a control board with digital display. The container is equipped with a dismountable metallic roof, an air cooling system as well as inside and outside lighting. Among other features, we may point out the special outdoor paint consisting in a primer surface treatment and finishing enamel coat .
The container represents an excellent protection against intrusions of any kind (dust, rain, thefts, and so on), it allows CPO units to be operated every door closed. Designed to be used outdoor, their ventilation system guarantees the efficiency of the whole device whatever the environment temperature and moisture conditions are.
Seemingly similar to any other 20 feet container, the CPO workshop container facilitates considerably the conveyance of the plant (pass for fork-elevator, bolt-on ISO corners). In addition to that, it can easily be loaded on an adapted trailer improving the mobility of the equipment to such a point that it can be operated from a spot to another without being taken off the trailer.
|
|
SKID MOUNTED CYLINDER FILLING PLANT – TURN KEY
The CFO Line presents the same specifications than containerised versions (cf. CPO Line). Note that skid mounted devices must be settled indoor in a place sufficiently ventilated. Apart from that, they only can be operated on a static basis. Due to their higher sensitiveness to their environment, the operator will have to make sure the operation area is adapted and isolated.
|
|
| ... products without technical information |
| |
| The TS420 Oxygen Deficiency Detector continuously monitors for oxygen deficiency and provides an analog output. The TS420's design is based on electrochemical cell technology. |
|
Fault-proof measurement of oxygen
J. Dittrich Elektronic's oxygen measuring systems determine the oxygen content in gas mixtures, monitor their own function during operation, signal malfunctions in the hardware and sensor, can be calibrated without personnel or reference gas in atmospheric air and, hence, are fault-proof.
A second oxygen sensor is not necessary!
The oxygen measuring system MF010-O is the first such system to obtain positive certification of its fault-proofness from the Technical Inspectorate of Southern Germany (TÜV). |
|
Honeywell's high accuracy oxygen sensor range employs two ZrO2 discs with a small, hermetically sealed chamber between the discs. The first disc functions as a reversible oxygen pump, which successively fills and empties the chamber. The second disc measures the ratio of the partial pressure difference and generates a corresponding voltage. A heat element produces the 700 °C required for the ZrO2 to operate as an O2 pump. The time needed for the pump to achieve specific minimum and maximum pressures within this chamber provides a measure of the partial oxygen pressure of the environment.
Best Used For:
Industrial process and aircraft on-board oxygen generation system control, automotive exhaust gas diagnostics, service instruments, environmental oxygen monitoring, agriculture, combustion systems and environmental control.
|
|
| Ocean Optics sensor systems are ushering in a new generation of low-cost, portable chemical-sensing devices. Thanks to innovation in the development of chemical-sensing complexes -- particularly those with fluorescing properties -- products such as our Oxygen Sensor systems will continue to provide viable alternatives to traditional chemical-sensing devices such as electrodes. The use of optical-sensing methods lessens the reliance on the electrochemical technologies that have dominated the field of oxygen sensing. |
|
Sensortechnics is a leading manufacturer and distributor of a wide range of sensors and fluid control devices. The product portfolio includes basic pressure sensors, rugged transmitters, submersible level sensors and customised pressure sensing systems from 1 mbar up to 1000 bar as well as liquid level switches, oxygen, flow and force sensors. Additionally, Sensortechnics offers ultrasonic air bubble, air-in-line, liquid level and fluid monitoring sensors and detectors. Fluid control devices include miniature solenoid valves and diaphragm pumps, electronic pressure controllers and custom specific fluidic control systems.
Sensortechnics has more than two decades of experience in providing highly customised sensing products and in the development of complex integrated fluid control systems for OEM customers worldwide. |
|
Alphasense Oxygen Sensors operate using well-known fuel cell technology. The O2-A3 (3-year warranty), O2-A2 (2-year warranty), O2-A1 (1-year warranty), O2-G2 (2-year warranty)and O2-G1 (1-year warranty),sensors are designed for the latest generation of portable gas detectors where high detection performance, total reliability, small size and long lifetime are the key criteria.
All Alphasense sensors pass through our unique ATAV system (Automatic Test and Validation), which provides 100% traceability for you and your customers. Our sensors can also be supplied with a customised test report to individual requirements. A record of each sensor's performance is stored in the Alphasense database, accessible via the sensor barcode. This can be made available as hard copy evidence and also provides a powerful diagnostic tool. |
|
| The GS Oxygen Sensor KE series (KE-25 and KE-50) is a unique galvanic cell type oxygen sensor which was developed in Japan in 1985. Its most notable features are long life expectency, excellent chemical durability, and it is not influenced by CO2. The KE series oxygen sensor is ideal to meet the ever-increasing demand for oxygen monitoring in various fields such as combustion gas monitoring, the biochemical field, medical applications, domestic combustion appliances, etc. |
|
| The Series 2500 Percent Oxygen Transmitter is a true two-wire transmitter offering an economical way to make accurate and dependable percent oxygen measurements in a variety of gases. The Series 2500 Percent Oxygen Transmitter is both dustproof and waterproof, and is rated for NEMA 4 (IP66) service. |
|
The remarkable features of this oxygen sensor are its extremely long service life and the low maintenance costs due to its long-term adjustment and cleaning intervals.
The adjustment can be done in air or in saturated water without any calibration tables. The replacement of the galvanic cell is simplified by the design of the sensor. The membrane is very durable and is almost unbreak-able (100 µm membrane thickness).
Newly developed sensor electronics enable the oxygen sensor to work without an additional storage battery. The sensor can be modified to customer's needs regarding measuring range and accuracy.
The response time is less than 2 minutes.
The sensor can be immersed directly in water courses or tanks and does not need regular maintenance. The sensor is also available in combination with a temperature sensor. |
|
| The GS-Yuasa Oxygen Sensor SK-25 is a unique galvanic cell type oxygen sensor. Its most notable features are long life expectency, excellent chemical durability, no position dependency, and it is not influenced by CO2. The SK-25 oxygen sensor is ideal to meet the ever-increasing demand for oxygen monitoring in various fields such as food, bio-technology, security system. |
|
Available for zone 1, ATEX
|
|
Model InstaTrans (3001) Oxygen Transmitter
The Insta Trans is a two-wire, loop-powered 4-20 mA oxygen transmitter packaged within a weather tight NEMA-4 housing. The product was named for its built-in level of flexibility. It can instantly transform from ppm to percent (or vice-versa) simply by changing out the Teledyne sensor and resetting the range scale of the unit to ppm or percent via the function keypad.
The Insta Trans has six user selectable ranges from 0-10 ppm to 0-25 %. The user can easily change to the preferred range via the built in function keypad. In addition, depending on the corrosive nature of the sample, the Insta Trans can be supplied with either stainless steel or nylon wetted parts.
|
|
For over 40 years GfG has been specializing in the development and manufacturing of systems for the measurement of explosive and toxic gases, oxygen as well as further parameters in air and water used in communities, chemical industry, fire and civil protection, mining, power supply, food processing industry, shipping, steel industry, agriculture and also research institutes and universities.Our range extends from sensors, to the smallest gas measuring device in the world, microprocessor driven multimeter with data storage to computer supported systems.
At GfG measuring instruments and sensors are developed by a highly-qualified team of engineers and scientists. A special focus is the development of sensors with the measuring system of IR-absorption, catalytic combustion and thermal conduction.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
